This study is to show the importance of customer and to define the customer's meaning in food industry. According to previous research, a consumer is a very small part of customer. At present and in the future, a customer is not only a consumer but all of interior and exterior environments related to a company. However the scope of customer has been extended eventually. Therefore, it is important for a company to find out and secure the proper customer giving profit. This study considers a relative marketing as a way to impress a customer. It is a useful marketing technology to make profits and company's growth. And to achieve a relative marketing successfully, it is necessary to perceive a fundamental understanding and building an organization for workers. Therefore, this study propose that a company would accomplish followings to continue a quality growth. First, Understanding and confidence about workers. Second, Building the culture of a company's organization impressive to a customer Third, Continuing effort and interest ing about service. In conclusion, a company will accomplish a customer satisfaction successfully through developing a service organization and performing relative marketing.
RC servos are electro-mechanical devices that respond to a control signal, which instructs them to move their output shaft to a certain position. A servo is normally plugged into a radio receiver with a three pin connector. The three wires are a power (usually 4.8V to 6.0V), a ground, and a signal wire. The signal wire carries a PWM (Pulse-Width Modulation) signal consisting of a 1-2msec pulse repeated 50 times a second. A 1.5msec pulse will tell the servo to move to its output shaft to the center position, 0 degrees. For a servo with a 180 degree of motion, a 1msec pulse will move the servo to -90 degrees, and a 2msec pulse will move the servo to +90 degrees. In order to development a humanoid robot, mechanical design, fixtures design, analysis of kinematics, implementation moving program, selection of RC servo motor and controller are required. This study was performed to experimentally compare the rotation range of RC servo motors according to change of a periods.
It is not the time when foodservice operations in Korea envy worldwide foodservice operations. For our foodservice operations to survive unlimited competition we do not wait for strong brand to be made, but make a worldwide brand through systematic tactics and strategy. To be a worldwide first-class foodservice operation we have to make first-class food products and a first-class brand accordingly. Brand has a power to lighten the future of a company and is in the limelight as a being to be attracted an attention from an invisible being. Brand is considered as a means to all the foodservice operations which invests enormous fund and time, and is appeared as a powerful weapon. It is not too much to say that 21st century is a marketing era centering on a brand. But this brand may be changed its property by various environment and changes. On the other hand it may be disappeared. Therefore more attention must be paid continuously about strategic actions to manage the brand. Now all companies can't promise to succeed without a powerful brand. The fact is that a worldwide brand to be made and developed is necessary. Also If not to do so it is very difficult to survive permanently.
KSII Transactions on Internet and Information Systems (TIIS)
/
제9권1호
/
pp.434-445
/
2015
In reading news stories online, people are exposed to others' comments to a news story. In spite of popularity of comments to a news story online, the understanding of why and who posts a comment is still lacking. To complement scarcity and have a better understanding of comment-posting online, this study examined psychological factors which affect the likelihood of posting a comment to a news story online. In particular, three variables were considered: The first variable was communication efficacy, that is, an individual's belief about communication practices and systems, under the supposition that the people who have greater levels of communication efficacy are more likely to post a comment. The second variable was perception of public opinion, to test that when and if people judge their position of the issue as favored by the majority, they tend to post a comment. And finally, the tone of existing comments was included, to test if the tone of comments affects the willingness to post a comment. The results showed that firstly, people at a high level of communication efficacy are more likely to post a comment compared to people at the low level of communication efficacy. Secondly, the perception of public opinion partly influenced the willingness to post a comment. Especially, when people believe communication systems contribute to develop society and also when judged that their opinion is the majority's opinion, they are more likely to post a comment. Finally, the tone of the comments influenced the willingness to post a comment only on the condition that people are confident of the communication practice and are exposed to emotional comments.
International Journal of Computer Science & Network Security
/
제21권9호
/
pp.247-260
/
2021
Data modeling is a process of developing a model to design and develop a data system that supports an organization's various business processes. A conceptual data model represents a technology-independent specification of structure of data to be stored within a database. The model aims to provide richer expressiveness and incorporate a set of semantics to (a) support the design, control, and integrity parts of the data stored in data management structures and (b) coordinate the viewing of connections and ideas on a database. The described structure of the data is often represented in an entity–relationship (ER) model, which was one of the first data-modeling techniques and is likely to continue to be a popular way of characterizing entity classes, attributes, and relationships. This paper attempts to examine the basic ER modeling notions in order to analyze the concepts to which they refer as well as ways to represent them. In such a mission, we apply a new modeling methodology (thinging machine; TM) to ER in terms of its fundamental building constructs, representation entities, relationships, and attributes. The goal of this venture is to further the understanding of data models and enrich their semantics. Three specific contributions to modeling in this context are incorporated: (a) using the TM model's five generic actions to inject processing in the ER structure; (b) relating the single ontological element of TM modeling (i.e., a thing/machine or thimac) to ER entities and relationships; and (c) proposing a high-level integrated, extended ER model that includes structural and time-oriented notions (e.g., events or behavior).
Itza-Ortiz, Benjamin A.;Martinez-Avendano, Ruben A.
대한수학회지
/
제59권5호
/
pp.997-1013
/
2022
In this paper we give conditions on a matrix which guarantee that it is similar to a centrosymmetric matrix. We use this conditions to show that some 4 × 4 and 6 × 6 Toeplitz matrices are similar to centrosymmetric matrices. Furthermore, we give conditions for a matrix to be similar to a matrix which has a centrosymmetric principal submatrix, and conditions under which a matrix can be dilated to a matrix similar to a centrosymmetric matrix.
The purpose of this study is to develop a management model to effectively provide hospice service of nursing home. In a method of study to achieve this purpose, a positive research and literature study have been performed at the same time. Concerning contents to be examined as a definition of notions and patterns about hospice for the aged, foreign hospice and structural elements of hospice management, a literature study to support a theoretical background has presented leading studies as an analysis form of this study through analyzing domestic and foreign literature, thesis, journal and so on. In order to attain the purpose of this study, the positive research is to carry out a survey of demand and desire of people who have already got hospice service in the first place as a fact-finding survey related to the subject of hospice service, investigate organizations to operate nursing home and hospice and relevant experts in the second place as a survey of supply system to provide hospice service, and develop an appropriate management model to connect the demand and supply of nursing home through it. Therefore, this study has developed a delivery system and a chart of the practical trend to be done minutely, presenting a model to manage a hospice of nursing home based on the above results. The management model externally has connected medical team of hospital with hospice team of home based on a community, and internally is composed centering on five elements such as administrative organization, manpower, program and contents of service, finances. In practical model of hospice management of nursing home, in order to plan a program, provide service and give a high-quality service to the aged, this study has presented a trend chart of service management on the basis of five structural elements, an analysis form of this study. In conclusion, this study could present data to develop a hospice in the field of nursing home for the aged by showing a model concerning a hospice management of nursing home, but in my opinion, a following study to be detailed and developed even more than this study should be continued.
This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design
Since the 17th century, the society of Chosun Dynasty belonged to a period of rapid transition in many fields. As the building is a result produced on the basis of a society and economy, the general transition in a society is to be reflected into a process of building construction. Therefore an understanding or estimate of a building can be guaranteed by research of a process of building construction. Economic base factors in its process consist of material, cost, manpower, and operation system, etc. to be committed to the construction. On the premise, this paper is to examine the production of wood members and the calculation of the amount of raw woods in a process of woodwork in the construction of the government managed buildings in the late of Chosun dynasty. Construction reports, job slips, written estimates, and other documents in those days are examined for the study. To classify raw woods according to a standard size was aimed to a material management appropriately to apply each them to building size or its member size. The way to select a list of raw woods applicable to each member size, and to calculate the amount of the demanded wood was much more improved with 'Injungjeon-yeongkweon' in the year 1805 at the turning point than 'Hwaseong-seongyuk' in the year 1796. The improvement of material management brought to overcome a shortage of the amount supplied from forest preserve, and to a rationalization of building construction.
International Journal of Knowledge Content Development & Technology
/
제3권2호
/
pp.67-94
/
2013
This exploratory research explores the concept of a digital legacy as a general concept and as a collection of digital possessions with unique characteristics. The results reported in this article are part of a larger study. In Cushing (2013), the author identified the characteristics of a digital possession. In this study, these characteristics of a digital possession were utilized to explore how the characteristics of several digital possessions could form a collection, or a digital legacy. In addition to being explored as a collection of digital possessions, data was collected about the general concept of a digital legacy. In part I of the study, 23 participants from three age groups were interviewed about their general concept of a digital legacy. Five general characteristics describing a digital legacy were identified. In part II of the study, interview data from Cushing (2013) was used to create statements describing digital possessions. The statements were classified utilizing the archival concept of primary and secondary values, as well as the consumer behavior concepts of self extension to possessions and possession attachment. Primary value refers to the purpose for which the item was created, while secondary value refers to an additional value that the participants can perceive the item to hold, such as a perception that an item can represent one's identity. Using standard Q method procedure, 48 participants were directed to rank their agreement with 60 statements (written on cards), along a distribution of -5 to +5, according to the characteristics of the digital possession they would most like to maintain for a digital legacy. The ranked statements were analyzed using Q factor analysis, in order to perceive the most common statements associated with maintaining digital possessions for a digital legacy. Q method results suggested that most individuals described the digital possessions they wanted to maintain for a digital legacy using various combinations of characteristics associated with primary and secondary values. This suggests that while some participants will respond to personal archiving based on the concept of preserving identity (a perceived secondary value), this will not appeal to everyone. Information professional could consider this difference in appeal when marketing personal archiving assistance to patrons.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.