• 한국방사선학회논문지
• /
• 제14권7호
• /
• pp.1003-1011
• /
• 2020

본 연구는 듀얼 에너지 CT를 사용하여 금속인공물을 감소시키는 기법을 적용함에 있어 단일 선원과 이중 선원간의 영상 차이를 비교 평가하고자 한다. 단일 선원 장치로는 Discovery CT 256(GE, USA), 이중 선원 장치로는 Somatom Definition Flash(Siemens Health Care, Forchheim, Germany)를 이용하였다. 자체 제작한 팬텀(의료용 Titanium Screw를 삽입한 돼지다리)을 이중에너지 CT를 이용하여 동일 조건하에 선량을 변화시키며 영상을 얻은 후 정량적, 정성적 평가 하였다. 평가 방법으로는 뼈 주변, 조직 주변으로 나누고 금속삽입물로 인해 발생한 금속인공물(선속경화, 산란, 줄무늬)에 대하여 SNR을 측정하여 비교 분석하였다. 단일 선원 장치와 이중 선원 장치 간 금속 인공물 감소기법에는 영상의 차이가 있었다. 단일 선원 장치에서는 금속삽입물에 의한 선속경화 인공물이 이중 선원 장치에서 얻은 영상보다 많은 감소를 보이며 인공물의 방해 없이 주변 조직부가 잘 관찰 되었다. 이중 선원 장치에서는 금속삽입물에 의한 산란과 줄무늬 인공물이 단일 선원 장치에서 보다 많은 감소를 보이며 금속삽입물을 둘러싼 인접 조직들의 신호가 감소 없이 잘 관찰 되었다. 환자를 검사 시 보고자 하는 부위가 금속삽입물에 인접한 주변 조직이냐, 금속삽입물을 감싸는 전체적 조직이냐에 따라 단일 선원 장치와 이중 선원 장치를 구분하여 검사가 행해진다면 진단적으로 도움이 되는 영상을 획득할 수 있을 것으로 생각된다.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.353-360
• /
• 2005

Surface treatment play an important role in nucleating calcium phosphate deposition on surgical Ti implant. Therefore, the purpose of this study is to examine whether the precipitation of apatite on cp-Ti and Ti alloys are affected by surface modification in HCl and $H_2O_2$ solution. Specimens were then chemically treated with a solution containing 0.1 M HCl and 8.8M $H_2O_2$ at $80^{\circ}C$ for 30 mins, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface was examined with XRD, SEM, EDX ana XPS. Also, pure Ti, Ti-6Al-4V and Ti-6Al-7Nb alloy specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. All specimens chemically treated with HCl and $H_2O_2$ solution have the ability to form a apatite layer in the HBSS which has inorganic ion composition similar to human blood plasma. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $38.57\;{\mu}m,\;62.27\;{\mu}m\;and\;45.64\;{\mu}m$ in the cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloy specimens with the chemical treatment respectively, and $52.20\;{\mu}m,\;75.62\;{\mu}m\;and\;66.56\;{\mu}m$ in the commercial specimens of cp-Ti, Ti-6Al-4V and Ti-6Al-7Nb without any treatment respectively. The results of this evaluation indicate that the chemically treated cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloys have better bioactivity and biocompatibility compared to the other metals tested.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.453-459
• /
• 1998

저자들은 임프란트 매식 후 골유착을 위한 초기 치유기간 이전에 악정형력이 임프란트 주위 조직에 미치는 영향을 관찰하기 위하여 가토 12마리의 양측 대퇴골에 임프란트를 식립하고 2주, 4주 그리고 6주후에 각각 300g의 악정형력을 Ni-Ti close coil spring을 이용하여 매식된 임프란트에 4주동안 가하고 관찰한 후 다음과 같은 결론을 얻었다. 1. 모든 실험군의 임프란트는 4주간의 악정형력 적용후에도 안정된 견고성을 유지하였다. 2. 2주 실험군에서 대조군에 비해 임프란트와 골조직 사이의 섬유조직 증식이 많이 관찰 되었으나 특이할만한 염증소견은 관찰되지 않았다. 3. 4주 실험군, 대조군에서는 2주 실험군, 대조군과 각각 비교하였을 때 보다 많은 양의 골재생이 관찰 되었으며 실험군과 대조군 모두에서 임프란트와 골조직 사이의 섬유조직은 관찰하기 힘들었다. 4. 6주에서는 실험군과 대조군 사이에 뚜렷한 차이가 발견되지 않았다. 이상의 결과로 보아 임프란트 주위의 골조직 재생이 충분하지 않아도 골의 양과 질이 우수해 임프란트 식립시 견고한 초기고정을 얻을 수 있다면 골유착이 완성되는 초기 치유기간 이전에도 치과교정적 고정원으로 사용가능할 것으로 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.127-137
• /
• 2003

치과용 임플란트 실패의 주요 원인은 임플란트 표면에 부착되는 세균의 침착의 결과로 생기는 임플란트 주위염이다. 구강 내에서 세균성 치태의 침착은 치태가 부착하는 기질 표면의 물리적 성상과 타액성 피막의 성분에 영향을 받으며 형성된 피막의 유기질 성분의 차이가 치태의 성분과 병원성에 영향을 미친다. 최근 연구에 의하면 생체재료의 표면에 침착되는 치태세균은 사용되는 재료에 따라 특이한 세균 침착을 보이며 이는 초기 타액성 피막의 차이에 의한 것으로 알려져 있다. 이 연구의 목적은 플라즈마분사법으로 표면 처리된 타이태늄 임플란트에 흡착되는 타액성 단백질 피막의 특성을 정성적인 방법으로 분석하는 데 있었다. 법랑질 조각과 플라즈마분사법으로 표면 처리된 타이태늄 임플란트를 스프린트에 치실을 이용하여 연결한 장치를 구강 내 장착하여 2시간 동안 피막이 침착되게 한 후 피막을 분리 추출하여 냉동 건조시켰다. 재수화 과정을 거치고 나서 전기 영동법과 Western transfer 분석을 통해 단백질 성분에 관한 분석을 시행하였다. 사람의 총 타액과 이하선 타액 및 악하선-설하선 타액을 수집기를 이용하여 채취하고 같은 방법으로 처리한 후 성분분석을 실시하였다. 피막 흡착 전후의 표면변화를 주사전자현미경을 이용하여 관찰하였다. 실험결과 타이태늄 임플란트에 흡착된 피막은 법랑질 표면의 피막과는 다른 단백질 성분을 가지고 있었으며, 주로 악하선-설하선 타액에서 유래하였다. 임플란트와 법랑질 표면 모두에서 흡착된 피막에는 아밀라제, 분비성 면역 글로불린A 및 락토페린이 존재함을 알 수 있었으나 법랑질의 경우는 blotting이 약하게 나타났다. 주사전자현미경 관찰결과 시편의 표면에 균질한 피막이 덮고 있었으며 세균의 부착은 거의 관찰되지 않았다. 이상의 실험 결과들을 통하여 플라즈마분사법으로 표면 처리된 타이태늄 임플란트 표면에 부착된 타액성 단백질 성분은 법랑질과는 차이가 있음을 알 수 있었으며, 이러한 차이는 치태세균의 종류 및 병원성에 영향을 미칠 것으로 생각된다. 법랑질과 타이태늄 임플란트는 기질과 표면구조가 다르므로 표면에 형성 되는 치태성분도 다르다는 사실과 본 연구 결과를 종합하여 볼 때, 타이태늄 임플란트 표면에 흡착되는 초기 타액성 단백질의 성불이 타이태늄 표면에 침착되는 미생물 군의 조절에 중요한 역할을 가지고 있으며, 임플란트 치료 시에 올바른 치태 관리법의 교육을 통하여 환자 스스로 적절한 관리를 하도록 함으로써 임플란트 치료의 성공률을 높일 수 있을 것으로 생각된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.41-45
• /
• 2009

Background: Reduced bone height is one of the major problems faced in restoring tooth loss with implants. By the use of short implants, it is possible to reduce complicated and invasive treatment such as bone graft, allowing more simple surgery. But short implants are generally considered to have lower success rates than that of standard implants. Purpose: To assess the results of short Straumann implants by a retrospective study of short Straumann implants with TPS(titanium plasma-sprayed) and SLA(sandblasted, large grit, acid etched) surfaces. Materials and methods: 173 implants in 106 patients who received short Straumann implant surgery(${\le}8\;mm$) in the department of oral and maxillofacial surgery, Kyunghee Dental Hospital, from February 1996 to October 2006 were selected and studied. All of the implants were followed up after prosthetic rehabilitation. The average follow-up period was 34 months with 119 months as the longest follow up period. The average follow-up period after prosthetic rehabilitation was 31 months. 64 females(60.4%) and 42 males(39.6%) participated in the research with the age range of 19 to 85(mean age 47). 20 patients(18.9%) were under 40, 85 patients(80.2%) were over 40 and under 70, and only one patient(0.9%) was over 70 years old. Results: 27 implants(15.6%) had TPS surface while 146 implants(84.4%) had SLA surface. 9 implants(5.2%) were 3.3, 108 implans(62.4%) were 4.1mm and 56 implants(32.4%) were 4.8mm in diameter. 167 implants(96.5%) were 8mm and 6 implants(3.5%) were 6mm in length. There were 24 implants(13.9%) on the maxillas and 149 implants(68.8%) on the mandibles. 119 implants(68.8%) were rehabilitated with FPD(fixed partial denture), 47 implants(27.2%) with single crowns and 4 implants(2.3%) with overdentures. Among the fixed partial dentures, 30 of them were splinted with short implants only. After over an year of follow-up period, 139 implants(96.5%) out of 144 implants showed marginal bone loss of less than 1mm. 3 out of 173 implants failed showing 98.27% survival rate. Conclusions: The use of short Straumann implants(${\le}8mm$) can be a simple and reliable treatment method in minimal residual bone height.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.187-203
• /
• 2000

The precipitation of calcium phosphate on implant surface has been known to accelerate osseointegration and to enhance osseous adaptation. The present study was performed to examine whether the precipitation of calcium phosphate on Ti-6Al-4V alloy could be affected by the immersion in NaOH solution and heat treatment. Ti-6Al-4V alloy plates of $15{\times}3.5{\times}1mm$ in dimension were polished sequentially from #240 to #2,000 emery paper and one surface of each specimen was additionally polished with $0.1{\mu}m$ alumina paste. Polished specimens were soaked in various concentrations of NaOH solution(0.1, 1.0, 3.0, 5.0, 7.0, 10.0 M) at $60^{\circ}C$ for 24 hours for alkali treatment, and 5.0 M NaOH treated specimens were heated for 1 hour at each temperature of 400, 500, 600, 700, $800^{\circ}C$. After the alkali and heat treatments, specimens were soaked in the Hank's solution with pH 7.4 at $36.5^{\circ}C$ for 30days.The surface ingredient change of Ti-6Al-4V alloy was evaluated by thin-film X-ray diffractometer(TF-XRD) and the surface microstructure was observed by scanning electron microscope(SEM), and the elements of surface were analyzed by X-ray photoelectron spectroscopy(XPS). The results were obtained as follows ; 1. The precipitation of calcium phosphate on Ti-6Al-4V alloy was accelerated by the immersion in NaOH solution and heat treatment. 2. In Alkali treatment for the precipitation of calcium phosphate on Ti-6Al-4V alloy, the optimal concentration of NaOH solution was 5.0 M. 3. In heat treatment after alkali treatment in 5.0 M NaOH solution, the crystal formation on alloy surface was enhanced by increasing temperature. In heat treated alloys at $600^{\circ}C$, latticed structure and prominences of calcium phosphate layer were most dense. On heat treated alloy surface at the higher temperature(${\geq}700^{\circ}C$), main crystal form was titanium oxide rather than apatite. The above results suggested that the precipitation of calcium phosphate on the surface of Ti-6Al-4V alloy could be induced by alkali treatment in 5.0 M-NaOH solution and by heat treatment at $600^{\circ}C$.

• Journal of Periodontal and Implant Science
• /
• 제42권3호
• /
• pp.95-104
• /
• 2012

Purpose: The purpose of this study was to determine whether increasing the Ti6Al4V surface oxide negative charge through heat ($600^{\circ}C$) or radiofrequency plasma glow discharge (RFGD) pretreatment, with or without a subsequent coating with fibronectin, stimulated osteoblast gene marker expression in the MC3T3 osteoprogenitor cell line. Methods: Quantitative real-time polymerase chain reaction was used to measure changes over time in the mRNA levels for osteoblast gene markers, including alkaline phosphatase, bone sialoprotein, collagen type I (${\alpha}1$), osteocalcin, osteopontin and parathyroid hormone-related peptide (PTH-rP), and the osteoblast precursor genes Runx2 and osterix. Results: Osteoprogenitors began to differentiate earlier on disks that were pretreated with heat or RFGD. The pretreatments increased gene marker expression in the absence of a fibronectin coating. However, pretreatments increased osteoblast gene expression for fibronectin-coated disks more than uncoated disks, suggesting a surface oxide-mediated specific enhancement of fibronectin's bioactivity. Heat pretreatment had greater effects on the mRNA expression of genes for PTH-rP, alkaline phosphatase and osteocalcin while RFGD pretreatment had greater effects on osteopontin and bone sialoprotein gene expression. Conclusions: The results suggest that heat and RFGD pretreatments of the Ti6Al4V surface oxide stimulated osteoblast differentiation through an enhancement of (a) coated fibronectin's bioactivity and (b) the bioactivities of other serum or matrix proteins. The quantitative differences in the effects of the two pretreatments on osteoblast gene marker expression may have arisen from the unique physico-chemical characteristics of each resultant oxide surface. Therefore, engineering the Ti6Al4V surface oxide to become more negatively charged can be used to accelerate osteoblast differentiation through fibronectin-dependent and independent mechanisms.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.341-350
• /
• 2013

PURPOSE. To evaluate adherence of human gingival fibroblasts (HGFs) to transmucosal abutment of dental implant with different surface conditions with time and to investigate the roles of focal adhesion linker proteins (FALPs) involved in HGFs adhesion to abutment surfaces. MATERIALS AND METHODS. Morphologies of cultured HGFs on titanium and ceramic discs with different surface were observed by scanning electron microscopy. Biocompatibility and focal adhesion were evaluated by ultrasonic wave application and cell viability assay. FALPs expression levels were assessed by RT-PCR and western blot. RESULTS. There seemed to be little difference in biocompatibility and adhesion strength of HGFs depending on the surface conditions and materials. In all experimental groups, the number of cells remaining on the disc surface after ultrasonic wave application increased more than 2 times at 3 days after seeding compared to 1-day cultured cells and this continued until 7 days of culture. FALPs expression levels, especially of vinculin and paxillin, also increased in 5-day cultured cells compared to 1-day cultured fibroblasts on the disc surface. CONCLUSION. These results might suggest that the strength of adhesion of fibroblasts to transmucosal abutment surfaces increases with time and it seemed to be related to expressions of FALPs.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.268-277
• /
• 2020

This case report demonstrates two different uprighting mechanics separately applied to mesially tipped mandibular first and second molars. The biomechanical considerations for application of these mechanisms are also discussed. For repositioning of the first molar, which was severely tipped and deeply impacted, a novel cantilever mechanics was used. The molar tube was bonded in the buccolingual direction to facilitate insertion of a cantilever from the buccal side. By twisting the distal end of the cantilever, sufficient uprighting moment was generated. The mesial end of the cantilever was hooked over the miniscrew placed between the canine and first premolar, which could prevent exertion of an intrusive force to the anterior portion of the dentition as a side effect. For repositioning of the second molar, an uprighting mechanics using a compression force with two step bends incorporated into a nickel-titanium archwire was employed. This generated an uprighting moment as well as a distal force acting on the tipped second molar to regain the lost space for the first molar and bring it into its normal position. This epoch-making uprighting mechanics could also minimize the extrusion of the molar, thereby preventing occlusal interference by increasing interocclusal clearance between the inferiorly placed two step bends and the antagonist tooth. Consequently, the two step bends could help prevent occlusal interference. After 2 years and 11 months of active treatment, a desirable Class I occlusion was successfully achieved without permanent tooth extraction.