• Elastomers and Composites
• /
• 제5권2호
• /
• pp.188-194
• /
• 1970

We have studied to apply of a quantity of SBR contained high and domestic tire cord on manufacture tire. The Physical test of compounds and products, the travelling test of manufactured tires last year had revealed a good results. 1. The physical properties indicated better values than those found in the requirments of military specification. 2. Adhesion of carcass ply cord showed a good results. 3. The physical properties between 1260 d/2 nylon cord and 840d/2 nylon cord of domestic products be showed similar values and its have a results by 2-3 times than standards.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1917-1921
• /
• 2005

The Bar code, RFID in the standard recognition method for the goods automation of tire manufacture process, sometimes problem occurs with the damage due to a high tension, high fever. So it has problem that needs many instruments to attach it. In this paper, in the letter of tire's surface the Mold ID which has a specific feature it proposed the algorithm for the location detection of acquisition and Mold ID of the image which uses 3 dimension cameras.. It described the method which recognizes the each letter of Mold ID from the location which is detected.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.378-384
• /
• 1997

In curing process of tire, contact and slip occurs between green tire and curing bladder. The curing process is a critical step in the manufacture of tires. In this investigation, curing bladder shaping is examined using a finite element method. Specifically, a finite element model between the inner part of green tire and the outer part of curing bladder is generated using contact element and curing bladder is generated using incompressible element. Numerical analysis are performed on two different bladder types, different overall outer diameters of curing bladder and different heights of curing bladder. Numerical results show that contact pressure is increased by using toroidal type of curing bladder, increasing overall diameter and increasing height of curing bladder. To obtain natural equilibrium carcass line, there is a requirement in increasing contact pressure of the section between side and bead.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.184-191
• /
• 1996

In curing Process of tire, Contact and slip occurs between green tire and curing bladder. The curing process is a critical step in the manufacture of tires. In this investigation, curing bladder shaping is examined using a finite element method. Specifically, a finite element model between the inner part of green tire and the outer part of curing bladder is generated using contact element and curing bladder is generated using incompressible element, The experimental tensile tests are used to get the material properties of bladder rubber on practical conditions. Numerical analyses are performed on two different bladder types, different overall outer diameters of curing bladder and different heights of curing bladder.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.622-628
• /
• 2013

Due to the development of compounding technology, there is a considerable increase in the number of high performance rubbers in the world. Accordingly, there are rapid growing requests about high performance tires such as UHP tire and Run-flat tire. However, it is extremely difficult to investigate the friction coefficient of tire tread rubbers. An alternative solution must be developed with the reliability of high-speed linear friction test machines. The use of friction test machines can be expected to improve rubber friction researches. In this paper, we propose a new kind of high-speed linear friction test machine. We have designed and manufactured various mechanisms for friction tests. The final goals are to design and manufacture friction test machines that can investigate friction coefficients efficiently and rapidly. The performance of the proposed high-speed linear friction test machine is evaluated experimentally; however additional study should be necessary for safer and more reliable experimentation.

• 응용통계연구
• /
• 제9권2호
• /
• pp.55-72
• /
• 1996

일반적으로 타이어 제조공학에 있어서 측정되는 자료는 여러개의 설계인자와 성능 특성치가 사용된 다변량 자료행렬로 주어지는데, 이러한 자료행렬의 중요한 특성중의 하나는 각 반응값들이 서로 다른 것들과 높은 상관관곌르 가질 수 있다는 것이다. 따라서 본 연구는 이러한 복잡한 성격을 갖는 자료행렬의 분석에 적합한 biplot 작성의 수학적 이론을 알아보고, 또한 각 변수들의 구조적 특성 및 내재한 상호 관련성을 다변량 분산분석 biplot과 다반응치 희귀모형 biplot을 이용하여 포괄적으로 고찰하였다.

• 한국산업보건학회지
• /
• 제21권1호
• /
• pp.1-10
• /
• 2011

Generally, the tire curing process is the process in which the sulfur is added and subsequently the tire is heated to give the tire elasticity. In this process, all kinds of the chemicals in the tire are emitted with a lot of heat. The chemical fume and heat aggravate the work environment. To solve this problem, 92 local exhaust ventilators and 8 gravity ventilators were used, but not satisfactory yet. Preliminary survey showed that the temperatures in the process were very high: 30.3, 32.9 and $37.2^{\circ}C$ at 2, 4 and 6m above the ground level, respectively in the winter (outside temperature was $2^{\circ}C$). It can be imagined that the process is severely hot in the summer time. The higher temperature distribution in the higher space tells us that the hot plume could not be removed with the existing ventilation systems. Therefore, in this study, some alternative ventilation systems were designed. The partitions were used to contain the hot plume to increase the capture efficiency. The gravity ventilators were newly designed to improve the extraction efficiency of hot fume. To satisfy the balance of pressure in the curing process, some supply air system was introduced by renewing the existing air conditioning system. Many alternative solutions were evaluated by using computational fluid dynamics modelling. The best and applicable solution was selected and the existing ventilation system was modified. After implementing the new ventilation system, the hot environment was much improved. The temperature reduction in the curing process was about $6.4^{\circ}C$.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.541-546
• /
• 2011

This study was numerically investigated on thermal deformation of AC4C and AC7A aluminum alloy casting material for manufacturing the automobile tire mold. The metal casting device was used in order to manufacture the mold product of automobile tire at the actual industrial field. The temperature distribution and the cooling time of these materials were numerically calculated by finite element analysis. Thermal deformation with stress distribution was also calculated form the temperature distribution results. The thermal deformation was closely related to the temperature difference between the surface and inside of the casting. As shown by numerical analysis result, the thermal deformation of AC7A casting material became higher than AC4C casting material. In addition, the results of displacement and stress distributions appeared to be larger at the center parts of casting than on its sides because of the shrinkage caused by the cooling speed difference.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.98-105
• /
• 1998

In the automotive suspension system, especially, Mcpherson strut type, if the resultant of the force through tire and the link reaction force is not coincident with the spring force, the side load against shock-absorber occur. The magnitude of side load is proportional to the difference between resultant force and spring force. To reduce side load, several method can be used, and one is to use the side load coil spring. This study summarize the development results of side load coil spring, i.e., how to design, analysis, manufacture, and test.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.284-289
• /
• 2006

In 2003, Korean government made the 11 scopes of overburdened work[Ministry of Labor(MOL), Notification No. 2003-24] to prevent musculoskeletal disorders(MSDs). MOL Notification was established based on 'Washington Administrative Code 296-62-051, Ergonomics'. When initially investigating the contents, the labor unions and the specialists pointed out the possibility of devaluation on risk factors of MSDs. The present study aimed to compare the result of the NIOSH revised lifting equation(NLE) analysis with the MOL Notification(No.8, 9, 10) on manual lifting tasks. A study sample of 568 manual lifting tasks (automobile parts, foods, and tire manufacture) were evaluated for this study. All 502 tasks exceed lifting index(LI) of 1.0, but 276 tasks(55.0%) out of 502 tasks were evaluated non-over burdened work for musculoskeletal system by the MOL Notification. Particularly, 47 tasks(30.9%), in spite of exceeding LI of 3.0, were evaluated non-over burdened work. This study has shown the possibility of devaluation on risk factors of MSDs, when evaluated by MOL Notification. Therefore, it will be necessary to repeal or complement the scope of over-burdened work(MOL Notification) to prevent musculoskeletal disorders.