• Computers and Concrete
• /
• 제17권1호
• /
• pp.107-127
• /
• 2016

Concrete is a heterogeneous material containing many weaknesses such as micro-cracks, pores and grain boundaries. The crack growth mechanism and failure behavior of concrete structures depend on the plastic deformation created by these weaknesses. In this article the non-linear finite element method is used to analyze the effect of presence of micro pore near a crack tip on both of the characteristics of crack tip plastic zone (its shape and size) and crack growth properties (such as crack growth length and crack initiation angle) under pure shear loading. The FE Code Franc2D/L is used to carry out these objectives. The effects of the crack-pore configurations and the spacing between micro pore and pre-excising crack tip on the characteristics of crack tip plastic zone and crack growth properties is highlighted. Based on the obtained results, the relative distance between the crack tip and the micro pore affects in very significant way the shape and the size of the crack tip plastic zone. Furthermore, crack growth length and crack initiation angle are mostly influenced by size and shape of plastic zone ahead of crack tip. Also the effects of pore decrease on the crack tip by variation of pore situation from linear to perpendicular configuration. The critical position for a micro pore is in front of the crack tip.

• International Journal of Fluid Machinery and Systems
• /
• 제4권3호
• /
• pp.307-316
• /
• 2011

In order to clarify the features of tip leakage vortex near blade tip region in a half-ducted axial fan with large bellmouth, the experimental investigation was carried out using a 2-dimensional LDV system. Three sizes of tip clearance (TC) were tested: those sizes were 1mm (0.55% of blade chord length at blade tip), 2mm (1.11% of blade chord length at blade tip) and 4mm (2.22% of blade chord length at blade tip), and those were shown as TC=1mm, TC=2mm and TC=4mm, respectively. Fan characteristic tests and the velocity field measurements were done for each TC. Pressure - flow-rate characteristics and two-dimensional velocity vector maps were shown. The vortex trace and the vortex intensity distribution were also illustrated. As a result, a large difference on the pressure - flow-rate characteristics did not exist for three tip clearance sizes. In case of TC=4mm, the tip leakage vortex was outflow to downstream of rotor was not confirmed at the small and reference flow-rate conditions. Only at the large flow-rate condition, its outflow to downstream of rotor existed. In case of TC=2mm, overall vortex behaviors were almost the same ones in case of TC=4mm. However, the vortex trace inclined toward more tangential direction. In case of TC=1mm, the clear vortex was not observed for all flow-rate conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2414-2419
• /
• 2007

A rectangular fin with variable fin height, fin length and surrounding temperature is analyzed using a one-dimensional analytical method. Both the heat loss from a rectangular fin with non-insulated fin tip and that with insulated fin tip are presented as a function of the fin height, fin tip length and the convection characteristic number. The relative error in the heat loss of these two cases is also given as a function of the same variables. One of the results shows that the trend of heat loss for both cases with the variation of given variables is similar even though the relative error increases as the shape of the fin becomes shorter and fatter.

• 산업기술연구
• /
• 제22권B호
• /
• pp.21-26
• /
• 2002

The non-dimensional heat loss from a thermally asymmetric triangular fin is investigated as a function of a ratio of upper and lower surface Biot numbers (Bi2/Bi1), the non-dimensional fin length and tip surface Biot number using the two-dimensional separation of variables method. The effect of fin tip surface Biot number on the variation of the non-dimensional temperature along the sloped upper and lower surfaces for the thermally asymmetric condition is presented. The relationship between the non-dimensional fin length and the fin tip surface Biot number for equal amount of heat loss is also discussed as well as the relationship between upper surface Biot number and tip surface Biot number for equal amount of heat loss.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권2호
• /
• pp.94-101
• /
• 2001

Fin effectiveness and efficiency of a thermally asymmetric rectangular fin are represented as a function of non-dimensional fin length, width, fip tip surface Biot number and the ratio of fin bottom surface Biot number to top surface Biot number. For this analysis, three dimensional separation of variables method is used. One of the results shows that fin effectiveness can be increased or decreased depending on the fin length as the fin tip surface Biot number increases while fin efficiency decreases without depending on that as the fin tip surface Biot number increases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1888-1891
• /
• 2003

In this paper, we proposed a new method to control the length of carbon nano tube in the single CNT probe. A single CNT probe was composed of a tungsten tip made by the electrochemical etching and carbon nano tube which was grown by CVD and prepared through the sonication. The two components were attached with the carbon tape. Since the length of CNT can not be controlled during the manufacturing, the post process is needed to shorten the CNT. In this paper, we proposed the method of electrochemical process. The process was done under the optical microscope and the results were checked by SEM. The diameter of the carbon nano tube used in this paper was about 130nm because the above process had to be done with the optical microscope. Using the method proposed in this paper, we can control the length of the nano tube tip.

• 신재생에너지
• /
• 제2권1호
• /
• pp.46-55
• /
• 2006

The performance enhancement of heat exchanger in the drying system using solar collector with evacuated tubes is analyzed. First, for this analysis, the heat loss from a reversed trapezoidal fin attached at the pipe is calculated as a function of convection characteristic number ratio, fin base length and fin tip length. Also, the optimum heat loss and fin tip length of the fin under certain conditions are presented. The overall surface effectiveness of the cylinder with reversed trapezoidal fins in the heat exchanger are shown as a function of half fin base height, fin lateral slope and fin tip length.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1986-1991
• /
• 2003

To research on change of blade row flow field with tip clearance caused by upstream periodic wake, an apparatus that generate periodic wake through traversing cylinders were installed. Then how movement of upstream wake affect cascade flow and tip leakage flow were measured. Cylinder was installed in front of 50% of chord length, and traversing velocity was calculated at approximately 11.7m/s regarding inlet velocity and chord length. To measure three-dimensional velocity of flow inside blade row, single slanted hot-wire was used. From the results, when the periodic wake is inserted, the flow inside of cascade is dominantly affected by vortex that is generated from cylinder. This periodic wake affects passage vortex and tip leakage vortex.

• 대한수의학회지
• /
• 제44권1호
• /
• pp.143-150
• /
• 2004

This study was conducted to analyze the relationship between the occurrence of mastitis and the conformation of udders, teats, and teat tips of Holstein cows raised in Korea. Udders, teats, and teat tips were categorized by their conformation and the teat length, teat diameter and the distance from the tip of teat to the ground of 259 cows were measured. The most common shapes of udder, teats and teat tip were milking machine udder (27.4%), U-shaped teats (53.9%) and disk teat tip (53.8%), respectively. Mean teat length and diameters were 4.78 cm and 3.11 cm, respectively. The length and the diameter of front teats were significantly longer and wider than those of rear teats. However, the distance of the tip of teats to the ground was similar between front teats $(50.5{\pm}7.51cm)$ and rear teats $(50.7{\pm}8.83cm)$. The average daily milk yield was 26.4 kg/day, and the highest milk yield was observed from cows with large udder shape and above 4th lactation.

• 한국수자원학회논문집
• /
• 제38권2호
• /
• pp.143-153
• /
• 2005

최근 들어 자연형 하천과 하천생태계 복원에 대한 관심이 점증하면서 수리학적 기능 외에, 다양한 생태환경을 제공하고 하안 부근의 경관을 개선하는 기능을 가는 수제에 대한 관심이 커지고 있다. 그러나 현재 국내에는 수제설치에 대한 설계지침이 충분치 않을 뿐 만 아니라 국내 수행된 연구 자료가 매우 부족한 실정이다. 이에 본 연구에서는 수제 설계인자 해석을 위한 수리모형실험을 수행하였다. 실험조건은 수제선단 흐름변화와 수제하류부 재순환영역에 대한 고정상실험으로 수제길이와 투과율을 조절하여 수행하였다. 주요 분석은 수제 선단에서는 중앙부 유속증가와 세굴의 영향인자인 유속과 편향각을 측정하여 수제 선단유속비와 면적비에 대한 실험식을 제안하였다. 또한 수제하류부 재순환 영역에서는 수제 설치의 주요요인인 수제간격의 기초 자료를 해석하기 위해 흐름분리 길이와 입사각의 변화를 분석하였으며 투과율과 수제 설치각에 대한 실험식을 제안하였다.