• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.740-745
• /
• 1987

For the prediction of the crack growth initiation from a blunt notch or a precrack in a prestrained material under plane strain tension and small-scale yielding conditions, a microscopic fracture criterion is proposed in terms of the crack tip opening displacement(COD) needed for the attainment of fracture strain at a microstructural distance. Smooth blunting of a crack tip with an initial root radius is assumed, and strain distributions on the crack-line axis are calculated at each deformation stage until the distributions against an original distance normalized to the COD are insensitive to an initial root radius. This case of no initial-root-radius effect is taken as for a sharp crack tip, on which the criterion is applied to determine the characteristic length of material from a critical COD for a fatigue-precracked specimen. The predicted COD at the fracture initiation from a crack with an initial root radius or a prestraining shows reasonable agreement with experimental values.

• Korean Journal of Materials Research
• /
• v.28 no.7
• /
• pp.398-404
• /
• 2018

Fatigue crack growth retardation of 304 L stainless steel is studied using a neutron diffraction method. Three orthogonal strain components(crack growth, crack opening, and through-thickness direction) are measured in the vicinity of the crack tip along the crack propagation direction. The residual strain profiles (1) at the mid-thickness and (2) at the 1.5 mm away from the mid-thickness of the compact tension(CT) specimen are compared. Residual lattice strains at the 1.5 mm location are slightly higher than at the mid-thickness. The CT specimen is deformed in situ under applied loads, thereby providing evolution of the internal stress fields around the crack tip. A tensile overload results in an increased magnitude of the compressive residual stress field. In the crack growth retardation, it is found that the stresses are dispersed in the crack-wake region, where the highest compressive residual stresses are measured. Our neutron diffraction mapping results reveal that the dominant mechanism is by interrupting the transfer of stress concentration at the crack tip.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.197-208
• /
• 1995

An experiment study of the dendrite growth of ice crystals growing in quiescent pure subcooled water was made at small subcoolings of 0.035 K < ${\Delta}T$ < 1.000 K. It was observed that the growth kinetics and morphology are functions of not only subcooling but also thermal convection. When the subcooling is less than 0.35K, it was found that effect of thermal convection on growth kinetics of ice dendrites becomes important. Quantitiative measurements of growth velocity, $V_{G}$, and tip radii of the edge and basal planes, $R_{1}$ and $R_{2}$, were made simultaneously as a function of subcooling.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1440-1447
• /
• 2002

Adhesion of a hemispherical tip to the flat surface in nano-structures is simulated using the molecular dynamics technique. The tip and plates are modeled with the Lennard-Jones molecules. The simulation focuses on the deformation of the tip. Detailed descriptions on the evolution of interaction force, the energy dissipation due to adhesion hysteresis, the forma- tion-growth-breakage of adhesive junction as well as the evolution of molecular distribution during the process are presented. The effects of the tip size, the maximum tip approach, the tip temperature, and the affinity between the tip and the mating plate are also discussed.

• Structural Engineering and Mechanics
• /
• v.15 no.3
• /
• pp.367-378
• /
• 2003

The magnitude of the plastic zone around the crack tip of DENT (Double Edge Notched Tension) specimen and the crack growth length under cyclic loading were measured by ESPI (Electronic Speckle Pattern Interferometry) system. The measured magnitude of plastic zone was compared with the proposed by Irwin and calculated by a nonlinear static method of MSC/NASTRAN. The measured crack growth length by ESPI system was also compared with the obtained data by the image analysis system. From the study, it is confirmed that the plastic zone and crack growth length can be measured accurately with the high-tech equipment (ESPI System).

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.1
• /
• pp.47-53
• /
• 2012

This study was conducted to examine effects of plant growth regulators and light resources on the formation of multiple shoot and plant regeneration of Hovenia dulcis var. koreana Nakai. Stem and shoot tip were cultured on MS medium or WPM supplemented with various plant growth regulators. At the single treatment, the highest shoot formation was obtained when stem explants were cultured on WPM supplemented with kinetin $1.0mg{\cdot}L^{-1}$. MS medium containing NAA 0.1 and TDZ $0.1mg{\cdot}L^{-1}$ gave the best results for shoot induction rate and shoot growth in combination treatments. Of the BAP and kinetin tested, BAP $0.5mg{\cdot}L^{-1}$ on WPM was found to be more effective for shoot growth from shoot tip. Under white fluorescent light treatment, shoot growth was much higher than blue, red LED treatments. Root induction from in vitro growth of plantlet was the best on WPM supplemented with $1.0mg{\cdot}L^{-1}$ IBA. The results suggest that selection of plant growth regulators and light resources could be important factor to achieve an efficient in vitro growth.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.154-159
• /
• 1998

In order to assess the susceptibility of the environmentally assisted cracking(EAC) on SA508 Cl.3 steel in primary water condition, potential step test and slow strain rate test(SSRT) were conducted in a simulated crack tip condition. In this test, anodic dissolution was dominant in the crack tip environments. Proposed simple dissolution model is a modification of Hishida's anodic dissolution model at the plastic zone. One can predict actual crack growth rate with the smooth specimen through this model.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.164-166
• /
• 2013

Using a simple random walk model, this study simulated the growth of a self-assembled monolayer (SAM) pattern generated by dip-pen nanolithography (DPN). In this model, the SAM pattern grew mainly via the serial pushing of molecules deposited from the tip. This study examined various SAM patterns, such as lines, crosses and letters, by changing the tip scan speed.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.49-57
• /
• 1993

Bending fatigue tests were carried out on the specimenes with two different strength levels in order to investigate small crack growth rate. The main results obtained are as follows : (1) Small crack growth law, $da/dn=C{\sigma}_a{^n}a$ is useful several materials, but is not the rule applicable to all cases generally. (2) When da/dn in several specimens are equal, COD near the crack tip are also nearly equal. (3) Crack tip opening displacement(CTOD) is the main factor to control the small crack growth rate, and da/dn ${\propto}$ CTOD comes into being between the two. Accordingly, $da/dn=C({\sigma}_a{^2}/{\sigma}_s){^n}a^n$ shows the small crack growth rate being reflected crack closure phenomenon.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.177-181
• /
• 1984

This study was to confirm the influence of intracanal instrumentation whether the pulp infection could be extended to periapical tissue. Fifty three teeth (24 badly decayed and infected, 29 sound teeth) were employed for this experiment and grouped as follows; 1. The specimen taken from the tip of 12 infected pulp in which reamer was inserted to the canal up to apical 1/3 and cultured as long as 48 hours. After 24 hours culture 11 cases were positive and 1 ease was negative but the time of incubation elapsed as 48 hours a negative case turned to positive. 2. Broth immersed paper disc was placed for 1 minute on the tip of 12 infected teeth with a reamer inserted to the apical end and cultured as usual manner in the incubator. At 24 hour culture the growth was significant in 9 cases and after 48 hours total 12 cases were positive. 3. Reamer was inserted to apical 1/3 on 14 sterile pulp canals and specimens obtained from the root tip were cultured for 24 and 48 hours. The results on both group were negative. 4. Similar maner with No.3 except reamer tip was rest exactly at the apex revealed only 2 cases of positive at 48 hour culture. 5. The tip of 24 reamers which reached to apical 1/3 and apex of infected canal were cultured for 24 and 48 hours. At 24 hour culture the growth was evident. 6. The tip of 14 reamers which inserted to apical 1/3 of sterile canal showed negative at 24 hour culture. The 15 cases of the tip which reached to the apex of sterile canal were found negative except 3 positive cases at 48 hour culture.