• Journal of Ginseng Research
• /
• v.28 no.4
• /
• pp.201-206
• /
• 2004

This experiment was conducted to determine the economic application method of Yakto among 6 application method : amount of Yakto application $3\;plot(70\;l,\;25.5\;l,\;13,3\;l/kan;\;180cm{\times}90cm),$ and added side dressing(3 l/kan) each plot. The reduced amoumt of Yakto application(25.5 l, 13.3 l/kan) were lower the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca$ and Mg, but similar pH in bed soil compared with standard Yakto application(70 l/kan). Side dressing applicated on 29 May increased the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca,\;Mg$ and salt concentration in bed soil compared with non­side dressing in each Yakto application plot(70 l, 25.5 l, 13,3 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) were similar the contents of inorganic nitrogen, K, Mg and salt but lower $P_{2}O_{5}$ and Ca in bed soil compared with standard Yakto application(70 l/kan) in June. The reduced amoumt of Yakto application(25,5 l/Kan) added side dressing(3 l/kan) was similar the contents of P, K, Ca and Mg but lower N in leaves compared with standard Yakto application(70 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) was shorter stem length, and higher $5{\%}$ chlorosis of leaf tip, but similar emergence ratio, survival ratio, leaf senescence ratio, chlorophyll, stem diameter and leaf area compared with standard Yakto application(70 l/kan). These suggested that 25.5 l Yakto application added side dressing(3 l/kan) per kan might be possible economical application method of Yakto.

• The Korean Journal of Mycology
• /
• v.12 no.3
• /
• pp.105-110
• /
• 1984

Seven seed samples of corn obtained from Kangweon Provincial Office of Rural Development, Kerea were tested for seed-borne fungi, and found that all the samples tested were infected with Fusarium moniliforme to an extent of $6.0{\sim}79.5%$. Severely infected seed samples showed poor germination on blotter. Seed component plating showed that the fungus present not only in tip caps, pericarps and endosperms, but also in embryos. Heavy infection of the fungus caused severe seed rot and seedling blight in soil, but the damage was not severe and many plants grew without any symptoms when the seeds with light infection were sown in soil. However the fungus was frequently detected from inside of the stems of healthy looking seedlings. The results indicate that the fungus transmit from seed to plant systemically. In inoculation experiments, the fungus produced stem rots on corn plants of 110 days old. The cultivar of Hwangok 3 was revealed more susceptible to the fungus than that of Suweon 19.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.5-16
• /
• 2018

In the current study, the engineering behaviour of prebored and precast steel pipe piles was examined from a series of full-scale field measurements by conducting static pile load tests, dynamic pile load tests (EOID and restrike tests) and Class-A and Class-C1 type numerical analysis. The study includes the pile load - settlement relations, allowable pile capacity and shear stress transfer mechanism. Compared to the allowable pile capacity obtained from the static pile load tests, the dynamic pile load tests and the numerical simulation showed surprisingly large variations. Overall among these the restrike tests displayed the best results, however the reliability of the predictions from the numerical analysis was lower than those estimated from the dynamic pile load tests. The allowable pile capacity obtained from the EOID tests and the restrike tests indicated 20.0%-181.0% (avg: 69.3%) and 48.2%-181.1% (avg: 92.1%) of the corresponding measured values from the static pile loading tests, respectively. Furthermore, the computed results from the Class-A type analysis showed the largest scatters (37.1%-210.5%, avg: 121.2%). In the EOID tests, a majority of the external load were carried by the end bearing pile capacity, however, similar skin friction and end bearing capacity in magnitude were mobilised in the restrike tests. The measured end bearing pile capacity from the restrike tests were smaller than was measured from the EOID tests. The present study has revealed that if the impact energy is not sufficient in a restrike test, the end bearing pile capacity most likely will be underestimated. The shear stresses computed from the numerical analysis deviated substantially from the measured pile force distributions. It can be concluded that the engineering behaviour of the pile is heavily affected if a slime layer exists near the pile tip, and that the smaller the stiffness of the slime and the thicker the slime, the greater the settlement of the pile.

• Journal of Korean Society of Forest Science
• /
• v.82 no.1
• /
• pp.26-33
• /
• 1993

In vitro shoot proliferation and rooting were tested for 2-0 seedlings of half-sib families of 4 plus oaks trees. Nodal segments having axillary buds from 37 families(16 of Quercus acutissima, 10 of Q. variabilis, 7 of Q. serrata, and 4 of Q. mongolica) were cultured on WPM(Woody Plant Medium) supplemented with 0.5 mg/l BA (6-benzyladenine) and 0.01 mg/l NAA(${\alpha}$-naphthalene acetic acid) and subcultured at 2-3 weeks of intervals fur 6 months. In vitro rooting was carried out on GD(Gresshoff and Doy) medium supplemented with 0.5mg/l IBA(indole butyric acid). The capacity for shoot proliferation and rooting was highly varied with families. Generally, white oaks(Q. serrata and Q. mongolica) showed poor response than black oaks(Q. acutissima and Q, variabilis) in shoot proliferation and rooting. Among the total of 37 families, 7 of Q. acutissima, each 2 of Q. variabilis, Q. serrata, and Q. mongolica revealed abilities for continuous shoot proliferation, and the others failed to proliferate. Rooting of the selected oak trees also greatly varied among the families. In Q. acutissima, rooting ratio ranged from 10.0%(CB 25. KG 4) to 89.8%(CB 18). Although 26.7% of KG 16 in Q. variabilis, 3.3% of JN 15 in Q. serrata were rooted, Q. mongolica was not rooted at all in this experimental conditions. No relationship between shoot growth and the rooting ability was observed. Present results suggest the possibility of large-scale micropropagation, but further studies on family differences, shoot-tip necrosis, and callusing of rooting junction are still required to develop reliable micropropagation systems.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.317-333
• /
• 2000

The purpose of this study was to determine the proliferative activity of the osteoblasts and fibroblasts in the midpalatal area and to investigate the adjacent periodontal tissues of individual tooth following rapid expansion of the palate. Ten young adult dogs, aged approximately ten months, were used in the experiment. The experimental design was consisted of 1 week expansion group(Group E1, 3 dogs), 2 week expansion group(Group E2, 3 dogs), 2 week expansion and 2 week retention group(Group E3, 3 dogs), and control group(Group C, 1 dog). For each group, expansion screw was activated one time per day(1/4 turn;$90^{\circ}$) following Hyrax-screw application. The experimental animals in each group were sacrificed at 1, 2 and 4 weeks following palatal expansion. Maxillary tissue blocks were obtained and prepared ior the histomorphologic and immunohistochemical studies. Light mcroscope, polarizing microscope, and soft X-ray apparatus were used in this study, and following results were obtained. 1. In polarizing microscopic study, the expansion groups(E1 & E2) showed blue color representing bone resorption and new bone formation in midpalatal suture area. E3 groups skewed less blue color compared to the E1 and E2 group. But yellow color increased by calcification in the E3 groups. 2. Immunohistochemical study revealed that positive responses of the osteoblasts to PCNA and undifferentiated fibroblasts to EGF in E1 group were somewhat increased. Positive response to PCNA and EGF were increased in fibroblasts and the osteoblasts forming new bone in E2 group. In E3 group, the positive response cell concentrated the periphery of edge of palatal process in both PCNA and EGF. 3. Throughout the expansion period(E1 & E2), light microscopic study showed the edges of the extensive resorption and new palatal processes, indicating bone remodeling within the suture. E3 group exhibited less remodeling of midpalatal suture area. E2 group and E3 group showed cementum formation and resorption at the apex of 3rd premolar and 1st molar E3 group exhibited extensive hyalinized zone on the cervical portion of buccal side of 1st molar. 4. Soft X-ray analysis of E1 group showed hypomineralized defect and microfractures in various parts of the suture areas when compared with control animals. There was no significant difference in the degree of mineralization in the midpalatal suture region between the C and E3 groups. Tooth axis showed tipping of 3rd premolar and 1st molar in the E2 group and E3 group. Based upon these experimental results, it is concluded that the undifferentiated mesenchymal cells always presented in midpalatal suture area following RPE. Differentiated osteoblasts and fibroblasts possess proliferating cellular activity until the 2 week retention period. The posterior teeth are tend to tip buccally as RPE force applied. Retention group exhibited irreversible response with severe hyalinized zone on the buccal surface of the first molar.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.862-871
• /
• 2002

We investigated elementary students' conceptions of the simple electric circuit using a battery, a bulb and a wire, and made comparison between the cognitive conflict through peer discussion and the cognitive conflict through physical experience. Two hundred and sixty-four sixth grade students who already had learned about the electric circuit were participated. The questionnaire to investigate the student's conceptions about simple electric circuit consisted of 5 items drawing the wire connections between a battery and a bulb to light the bulb. The students in the discussion group paired randomly with student who had different conceptions, and then each pairs discussed about their ideas freely with each other. After discussion they conducted CCLT(Cognitive Conflict Level Test) which consisted of 4 factors; recognition, interest, anxiety, reappraisal. The physical experience group conducted a task in which they connected a battery and a bulb with a wire, then conducted CCLT. The sixth graders had various misconceptions. Most students were not aware of the scope of negative battery terminal and two electric terminals of a bulb. Many students emphasized the tip of a bulb and positive battery terminal. The score of CCLT in the discussion group was higher than in the physical experience group. This results showed that discussion with peers was more effective than physical experience to arouse cognitive conflict.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.391-399
• /
• 2004

The purpose of this study was to compare curing efficiency of newly developed curing units to traditional halogen curing unit by measuring thermal change and surface microhardness according to curing light system. Materials and mathods : The types of curing units were traditional low intensity halogen light(Optilux 360), plasma arc light(Flipo), low heat plasma arc light(Aurys), low intensity LED(Starlight), and high intensity LED(Freelight2). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. And after resin was filled to 2, 3, 4mm teflon mold, bottom temperature measured during curing. After 24 hours, microhardness of top surface and bottom surface of each resin specimen were measured. Results : The result of this study can be summarized as follows, 1. As measuring temperature of curing unit tips, Flipo is the highest as $52.4^{\circ}C,\;Freelight2(37.86^{\circ}C),\;Optilux360(32.68^{\circ}C),\;Aurys(32.34^{\circ}C),\;and\;Starlight(26.14^{\circ}C)$ were followed. 2. Flipo and Freelight2 were the highest similarly and Optilux360 and Aurys were similarly next and Starlight was lowest in temperature of bottom surface of resin mold. 3. Microhardness of top surface were generally similar, and Aurys was relatively low. 4. Optilux 360 and Freelight2 were the highest, and Flipo, Starlight, and Aurys were followed in microhardness of bottom surface. Conclusions : The results suggest that careful use of Flipo and Freelight2 might be able to cure greater depth of resin composite and do not cause thermal problems than other curing units.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.131-144
• /
• 1995

To determine the structure of chromosome and to identify the sex chromosome of Ginkgo biloba and G. biloba var. fastigiata, the samples were obtained from root tips of trees growing in seven different provinences. The results are as follows. The basic number of somatic chromosomes was 2n=24. The range of a relative length of long chromosome was between $14.88{\sim}11.18{\mu}m$ and that of short chromosome was $8.11{\sim}6.24{\mu}m$. The chromosome sets were composed with one long pairs of m type and 11 short pairs of sm or st type. These short pairs showed the continuous descending in length. There was a satellite on the short arm of the Longest chromosome pair, and were satellites of the one or both long arm of 7th or 8th chromosome pair which were sm or st type, or the shortest st type chromosome pair. Sometimes, a satellite on the short arm of the longest chromosome pairs of Ginkgo biloba was double satellite, but that of G. biloba var. fastigiata was not. Karyotype was $2n=24=2^{2s}A^m+2B^{st\;or\;sm}+2C^{st}+2D^{st}+2E^{st}+2F^{st\;or\;sm}+2G^{sm}+2^{2s}H^{sm}\;or\;(^{1s}H^{sm}+H^{sm})+2I^{st}+2J^{st}+2K^{st}+2^{2s}L^{st}\;or\;(^{1s}L^{st}+L^{st})$. The male and female trees were not apparently distinguished by the chromsome structures. However the differences between the satellites could be used to identify the male and females. The male tree has double satellite on short arm of a longest chromosome pairs and females' has not. Also female trees have a satellite on a short chromosome more frequently than male trees.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.59-68
• /
• 2003

Background : In intubated patients, cultures of endotracheal aspirates (EA) are apt to contamination throughout the endotracheal tube. Therefore, the identification of etiologic agents via conventional EA cultures is not always reliable. In order to differentiate a pulmonary infection from a non-infectious disease, and to identify the true etiologic agent of acute pulmonary infection, blinded protected specimen brushing (PSB) was used, and its efficacy evaluated. Methods : In 51 intubated patients, with suspected pneumonia, blind PSB were performed, and the results compared with blood and EA cultures. A protected specimen brush was introduced through the endotracheal tube, and settled at the affected large bronchus. A specimen brush was introduced to the expected region using the blind method. The tip of the brush was introduced with an aseptic technique after vigorously mixed for 1 minute in $1cm^3$ of Ringer's lactate solution. The specimens were submitted for quantitative culture within 15 minutes, with a culture being regarded as positive if the colony forming units were above $10^3/ml$. Results : Of the 51 patients, 15 (29.4%) had community-acquired pneumonia (CAP), 27 (52.9%) hospital-acquired pneumonia (HAP) and 9 (17.6%) non-infectious diseases. The sensitivity and specificity of the quantitative PSB culture for the diagnosis of pneumonia were 52.4 and 88.9%, respectively. The sensitivity and specificity of EA were 78.6 and 77.8%, respectively. The blind PSB was superior to the EA for the identification of true etiologic agents. Of 53 episodes of 27 HAP patients, MRSA (Methicillin-resistant staphylococcus aureus) (41.5%) was the most common causative agent followed by Pseudomonas aeruginosa (15.1%), Klebsiella sp. (7.5%) and Acinetobacter sp. (7.5%). Conclusions : As a simple, non-invasive diagnostic modality, the blind PSB is a useful method for the differentiation of a pulmonary infection from non-infectious diseases and to identify the etiologic agents in intubated patients. A blind PSB can be performed without bronchoscopy, so is safer, more convenient and cost-effectiveness for patients where bronchoscopy can not be performed.