• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.21-24
• /
• 2017

Usually, the oxygen vacancy is an important factor in an oxide semiconductor device because the conductivity is related to the oxygen vacancy, which is formed at the interface between oxide semiconductors and electrodes with an annealing processes. ZTO is made by mixing n-type ZnO and p-type $SnO_2$. Zink tin oxide (ZTO), zink oxide (ZnO) and tin oxide ($SnO_2$) thin films deposited by RF magnetron sputtering and annealed, to generate the oxygen vacancy, were analyzed by XPS spectra. The contents of oxygen vacancy were the highest in ZTO annealed at $150^{\circ}C$, ZnO annealed at $200^{\circ}C$ and $SnO_2$ annealed at $100^{\circ}C$. The current was also increased with increasing the oxygen vacancy ions. The highest content of ZTO oxygen vacancies was obtained when annealed at 150. This is the middle level in compared with those of ZnO annealed at $200^{\circ}C$ and $SnO_2$ annealed at $100^{\circ}C$. The electrical properties of ZTO followed those of $SnO_2$, which acts a an enhancer in the oxide semiconductor.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.497-502
• /
• 2019

금속산화물 나노구조물은 고감도 가스센서 및 대용량의 리튬이온 전지와 같은 첨단 응용 분야에 활용될 수 있는 유망한 소재로 알려져 있다. 본 연구에서는 산화주석(SnO) 나노구조물을 두 영역 전기로 장치를 이용하여 다양한 온도에서 Si 웨이퍼 기판 위에 성장시켰다. 원료물질인 이산화주석($SnO_2$) 파우더를 알루미나 도가니 속에 넣어서 $1070^{\circ}C$에서 기상화시켰으며, 이송가스인 고순도 Ar 가스를 1000 sccm으로 흘려주었다. SnO 나노구조물은 $350{\sim}450^{\circ}C$, 545 Pa 조건에서 30분 동안 Si 기판 위에 성장되었다. 성장된 SnO 나노구조물의 표면형상을 전계방출형 주사전자현미경(FE-SEM)과 원자힘 현미경(AFM)으로 조사하였다. 또한 성장된 SnO 나노구조물의 결정학적 특징을 Raman 분광학으로 조사하였다. 그 결과 성장된 산화주석은 SnO 상을 가지고 있었다. 기판의 온도가 증가함에 따라 성장된 SnO 나노구조물의 두께와 결정립의 크기도 $424^{\circ}C$까지는 증가하였다. $450^{\circ}C$에서 성장된 SnO 나노구조물은 복잡한 다결정 형태의 표면형상을 나타내었지만, $350{\sim}424^{\circ}C$ 범위에서 성장된 SnO 나노구조물은 기판에 나란한 형태의 단순한 결정구조를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.356-357
• /
• 2006

Tin oxide thin films have been prepared on display glass from mixtures of dibutyl tin diacetate as a tin source, oxygen as an oxidant by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. The relationships between the properties of tin oxide thin films and various reaction parameters such as the deposition temperature, deposition time and the oxygen gas flow rate were studied. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and thinner thickness of deposited film led to decreasing grain size, surface roughness and electrical resistivity of the formed thin films at $325{\sim}425^{\circ}C$. The properties of fabricated $SnO_2$ films are highly changed with variations of substrate temperature and deposition time.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.95-100
• /
• 2016

본 연구에서는 염화주석, 하이드라진 그리고 수산화나트륨을 원료로 하여 용액환원침전법과 수열반응법을 이용하여 주석산화물 결정을 제조하여, 주요 실험 변수에 의한 결정상 및 형상을 XRD와 SEM을 이용하여 분석하였다. 원료의 몰 비에 따라 구형 및 판상의 주석산화물 결정을 얻을 수 있었으며, 그 결정상은 SnO, $Sn_6O_4(OH)_4$이었다. 그리고 수열반응법에 의하여 얻어진 결정 모양은 온도 조건에 따라 판상 및 꽃 모양의 SnO 결정이 얻어졌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1829-1832
• /
• 2008

This paper reports a novel gas sensing method by using a thermoelectric device, thermopile in this case, with an embedded tin oxide catalyst. By using a thin catalyst film, the response time and recovery time were remarkably improved. The fabricated gas sensor was characterized through detecting NOx gas with various concentrations.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.122-123
• /
• 2006

Tin oxide nanoparticles (n-SnO and $n-SnO_2$) were synthesized by the inert gas condensation (IGC) method under dynamic gas flow of oxygen and argon at various conditions. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) method were used to analysis the size, shape and crystal structure of the produced powders. The synthesized particles were mostly amorphous and their size increased with increasing the partial pressure of oxygen in the processing chamber. The particles also became broader in size when higher oxygen pressures were applied. Low temperature annealing at $320^{\circ}C$ in air resulted to crystallization of the amorphous n-SnO particles to $SnO_2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.328-328
• /
• 2007

$SnO_2$ has a high potential for electric and electronic applications. We have anodized pure tin metal and nano porous tin oxide film was obtained on pure Sn. Nano porous tin oxide were grown by anodization in nonaqueous-base electrolytes at different potentials between 5 V and 100 V. Pore size of ~100nm was observed by FE-SEM. Pore sizes as a function of applied voltage and anodizing time were characterized. We obtained nano porous tin oxide film having an uniform pore size at low temperature. High specific surface area of $SnO_2$ will be very useful for gas sensor, lithium battery, and dye sensitized solar cell.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.81-86
• /
• 2019

금속산화물/그래핀 복합체는 고감도 가스센서 및 고용량의 이차전지와 같은 첨단 응용 분야에 활용될 수 있는 유망한 기능성 소재로 알려져 있다. 본 연구에서는 이산화주석($SnO_2$) 나노구조물을 두 영역 전기로 장치를 이용하여 화학적으로 합성된 그래핀 나노시트 위에 성장시켰다. 대면적의 그래핀 나노시트는 Cu foil 위에 열화학기상증착 장비를 이용하여 메탄가스와 수소가스로 합성하였다. 화학적으로 합성된 그래핀 나노시트는 PMMA를 이용하여 세척된 Si 기판위에 전사시켰고, $SnO_2$ 나노구조물은 그래핀 나노시트 위에 $424^{\circ}C$, 3.1 Torr 조건에서 3시간동안 성장시켰다. 합성된 그래핀의 품질과 성장된 $SnO_2$ 나노구조물의 결정학적 특성을 Raman 분광학으로 확인하였다. 그래핀 위에서 성장된 $SnO_2$ 나노구조물의 표면형상은 전계방출 주사전자현미경으로 조사하였다. 그 결과 합성된 그래핀 나노시트는 이중층 그래핀이었고, 그래핀 위에서 성장된 산화주석은 $SnO_2$ 상을 가지고 있었다. 그래핀 위에서 성장된 $SnO_2$ 나노구조물은 복잡한 표면형상을 나타내었는데, 이것은 Si 기판 위에서 성장된 $SnO_2$ 나노구조물이 nano-dots 형태인 것과 비교된다. 그래핀 위에서 성장된 $SnO_2$ 나노구조물이 복잡한 형상을 갖는 것은 그래핀 표면의 기능기의 영향인 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.283.1-283.1
• /
• 2016

Tin Oxide(SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. It would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. In addition, SnO2 is commonly used as gas sensors. To fabricate high quality epitaxial SnO2 thin films, a powder sputtering method was used, in contrast to typical sputtering technique with sintered target. Single crystalline sapphire(0001) substrates were used. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using X-ray diffraction, scanning electron microscopy, and atomic force microscopy measurements. We found that the strain evolution of the samples was highly affected by gas environment and growth rate, resulted in the delamination under O2 environment.