• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.75-76
• /
• 2000

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.76-77
• /
• 2003

• 한국표면공학회지
• /
• 제8권2호
• /
• pp.1-6
• /
• 1975

A novel electroplating process is described and effects of anode lay-out thickness distribution and on platiting rate are discussed. Microphotograhic analysis indicates are compact and less "POROUS " than of barrel and rack. With this process production cost reduction and capacity increase could be achieved by a rate of 60% and 97% respectively, as compared to our present barrel plating process. This process disclose a number of beneficial processes such as color coding system on TO-92 package and development of a new tin bath formula.

• 한국표면공학회지
• /
• 제16권3호
• /
• pp.98-107
• /
• 1983

A study on the improvement of wear resistance of brasses by electroplating and diffusion treatment of tin was carried out. The optimum condition of the treatment obtained was as follows. Plating thickness of tin : 5 - 9 $\mu\textrm{m}$ Condition of diffusion treatment : atmosphere ; fused nitrate bath (KNO3 + NaNO3) temperature and time ; 1st step 320$^{\circ}C$, 60min. and 450$^{\circ}C$, 30min. During the diffusion treatment, internetallic compounds of Cu-Sn were formed and these compounds were identified as η, $\varepsilon$ and $\delta$ phase from the outer tin layer. It was considered that the improvement of wear resistance of brasses by the treatment is because of the formation of intemetallic compounds particalarly $\varepsilon$phase which is very hard, between soft tin layer brass.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.163-168
• /
• 2008

The morphology of three-dimensional (3D) cross-linked electrodeposits of copper and tin was investigated as a function of the content of metal sulfate and acetic acid in a deposition bath. The composition of copper sulfate had little effect on the overall copper network structure, whereas that of tin sulfate produced significant differences in the tin network structure. The effect of the metal sulfate content on the copper and tin network is discussed in terms of whether or not hydrogen evolution occurs on electrodeposits. In addition, the hydrophobic additive, i.e., acetic acid, which suppresses the coalescence of evolved hydrogen bubbles and thereby makes the pore size controllable, proved to be detrimental to the formation of a well-defined network structure. This led to a non-uniform or discontinuous copper network. This implies that acetic acid critically retards the electrodeposition of copper.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.17-21
• /
• 2008

Sn-Cu계 솔더 범프에서 무전해도금법을 이용한 범프 형성에 대한 연구를 하였다. $20{\mu}m$ via에 전기도금법으로 구리를 채운 웨이퍼 위에 ball형태의 범프를 형성하기 위하여 구리와 주석을 도금하여 약 $10{\mu}m$높이의 범프를 형성하였다. 구리 범프 형성 시 via위에 선택적으로 도금하기 위하여 활성화 처리 후 산세처리를 실시하고 무전해 도금액에 안정제를 첨가하였다. 무전해도금법을 이용하여 주석 범프 형성 시 도금층이 구리 범프에 비해 표면의 균일도가 벌어지는 것으로 관찰되었지만 reflow공정을 실시한 후 ball 형태의 균일한 Sn-Cu 범프를 형성하였다.

• 자원리싸이클링
• /
• 제31권6호
• /
• pp.18-24
• /
• 2022

건축용 유리생산공정에서 유리의 평활도 제어를 위한 주석욕조에서 발생하는 폐주석 산화물로부터 천연가스를 이용하여 주석을 회수하는 건식환원공정을 제안하고 환원거동을 고찰하였다. 천연가스 건식환원시스템은 20kg급 연속생산 수직형 반응로로 상부취입, 하부토출 방식으로 시스템을 정립하였다. 모든 반응온도 조건에서 투입가스량이 증가할수록 회수율이 높아지는 결과를 얻었으며, 800℃, 4sccm 조건에서 97.2%의 회수율을 보였다. 반응가스분석결과 23%의 수소를 확인하였으며, 16.6%의 메탄가스 수소전환율을 보였다. 천연가스 환원 주석의 환원반응을 고찰함으로써 폐자원 환원/회수기술 정립에 대한 기초자료를 정립하였다.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.34-41
• /
• 2003

Effects of additives and plating conditions of high speed electroplating were investigated. The Sn content in electrodeposit was highly decreased with increasing current density from $10A/dm^2$ to $50A/dm^2$, and the current efficiency on the cathode was decreased. The carbon content in the electrodeposit was decreased with increasing current density from $10A/dm^2$ to $30A/dm^2$, however the carbon content was highly increased in the range of $40A/dm^2$$∼50A/dm^2$. The formation of tetravalent tin and stannic oxide sludge was prevented by the addition of gallic acid in the bath. The changing of Sn content in the electrodeposit is caused by the addition of gallic acid.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.245-254
• /
• 1993

The effects of pulse current electrolysis conditions on the composition and the microstructure of Ag-Sn alloy were studied by using a pyrophosphate bath. Both cathode current efficiency and throwing power of alloy deposits formed under pulse plating conditions, decreased with increasing mean current density, and lower than those under D.C. electrolysis condition. Tin content of Ag-Sn alloy decreased noticebly with in-creasing the mean current density, while it increased with the increase of On-time from 1 to 10 ms. The pre-ferred orientation of Ag-Sn alloy changed with increasing cathode overpotential in the sequence of (100)longrightarrow(100)+(111)longrightarrow(111) at $20^{\circ}C$ and (110)longrightarrow(111)longrightarrow(111)+(100) at $30^{\circ}C$. The effective crystal grain size of the alloy was decreased by decreasing temperature from $30^{\circ}C$ to $20^{\circ}C$ and the surface structure of them was related to the preferred orientation.

• 한국표면공학회지
• /
• 제34권4호
• /
• pp.303-312
• /
• 2001

Composition and microstructure of the tin-zinc alloys electroplated in gluconate bath were studied according to pulse current parameters. The cathode current efficiency increased with both the mean current density and the off-time decrease. Zinc content of the alloy deposits increased with increasing mean current density, while it decreased noticebly with increasing the off-time from 10-30ms to 100-150ms. The preferred orientation of the alloy deposits changed with the increase of peak current density in the sequence of (220)longrightarrow(220)+(420) or (220)+(420)+(321) mixed structure. The equiaxed grain size of the alloy increased with the increase of off-time and the decrease of mean current density.