• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1869-1873
• /
• 2004

trans-Dihydroxo[5,10,15,20-tetrakis(n-pyridyl)porphyrinato]tin(IV) (n = 3 and 4) complexes have been synthesized and fully characterized. X-ray structural analysis of trans-dihydroxo[5,10,15,20-tetrakis(4-pyridyl)porphyrinato]tin(IV) reveals that the supramolecular hydrogen bondings between the hydroxotin(IV) porphyrins and lattice water molecules form a hydrogen-bonded two-dimensional network. The hydrogen bonding mode between the tin(IV) porphyrins and the water molecules closely resembles that of the hydrogenbonded outer-sphere intermediate in the acidolysis of dihydroxotin(IV) porphyrins.

• Composites Research
• /
• 제33권1호
• /
• pp.25-29
• /
• 2020

Diglycidyl ether of 4,4'-biphenol을 기지로 사용하고, tin(IV) oxide를 filler로, sulfanilamide를 경화제로 사용하여 액정성 열경화성 에폭시 기반 복합재료를 제작하였다. TGA와 LFA를 이용하여 3.0-7.0 wt%의 tin(IV) oxide를 분산시켜 제작한 복합재료의 열적 거동을 조사한 결과, 열분해 활성화 에너지와 열전도성이 filler의 첨가량에 비례하는 것으로 나타났다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.136-137
• /
• 1998

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.456-460
• /
• 1999

Transparent conducting tin (IV) oxide thin films have been studies and developed for the electrode materials of solar cell substrate. Fabrication of tin oxide thin films by sol-gel method is process development of lower cost photovoltaic solar cell system. The research is focused on the establishment of process condition and development of precursor. The precursor solution was made of tin isopropoxide dissolved in isopropyl alcohol. The hydrolysis rate was controlled by addition of triethanolamine. Dip and spin coating technique were applied to coat tin oxide on borosilicate glass. The resistivity of the thin film was lower than 0.1Ω-cm and the transmittance is higher than 90% in a visible range.

• Bulletin of the Korean Chemical Society
• /
• 제9권6호
• /
• pp.365-368
• /
• 1988

Coordination chemistry of organotin(IV) dithiocarbamate complexes has been examined in terms of far infrared and $^{119}Sn$-NMR spectroscopies. Although the Sn-S stretching vibrational bands of the complex could not be correlated with the bonding nature of the dithiocarbamate ligand, $^{119}Sn$ chemical shifts were sensitive enough to distinguish clearly the coordination number of tin, and as such the bonding mode of the dithiocarbamate ligand could be indentified to be monodentate or bidentate. Thus the $^{119}Sn$-NMR study on new cyclohexyltin(IV) dithiocarbamate complexes along with the known complexes suggests that the bonding mode of the dithiocarbamate ligands and the consequent coordination number of tin are determined mainly by the inductive effects of the organic groups attached to the tin atom.

• 공업화학
• /
• 제9권2호
• /
• pp.214-219
• /
• 1998

초음파분무 열분해에 의하여 유리 기판 위에 투명전도성 산화주석막을 증착하였다. 증착변수가 산화주석막의 전기저항, 광투과도, 결정구조 및 두께에 미치는 영향을 조사하였다. 증착시간과 염화주석(IV)의 농도가 증가함에 따라, 증착된 산화주석막의 전기저항과 가시선 및 근적외선 영역에서의 광투과도가 감소함을 보여주었다. 공기중에서 열처리온도가 증가하면, 증착된 산화주석막은 전기저항과 광투과도가 증가함을 나타냈다. 본 연구결과는 초음파분무열분해가 단일과정으로서 양질의 투명전도막을 효율적으로 제조할 수 있는 유망한 증착기술임을 암시한다.

• 전기화학회지
• /
• 제9권2호
• /
• pp.59-63
• /
• 2006

전해코팅 법과 dip-coating 법을 이용해 산화주석(IV)을 티타늄 지지체에 코팅하여, 코팅 방법에 따른 코팅 전극의 물성과 전기화학적 특성에 대해여 연구하였다. HCl 로 전극 에칭 후, nitrate 용액에 $SnCl_2{\cdot}2H_2O$을 용해시켜 pulse technique를 이용하여 전해코팅 하였으며, dip-coating 법 또한 $SnCl_2{\cdot}2H_2O$를 사용하여 1:1V% HCl 용액에 용해시켜 코팅 소결 후 산화주석(IV)코팅 전극을 제작하였다. 두 가지 코팅 방법을 통해 제작된 산화주석(IV)코팅 전극은 전극의 물성을 비교하기 위해 x-ray diffraction (XRD), scanning election microscopy (SEM)를 관찰해보았고, 전기화학적 특성을 평가하기 위해 cyclic voltammetry (CV)를 측정하여 전위창을 비교해 보았다.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.13-22
• /
• 1991

This study investigated the effects of surface treatment on the tensile bond strength of resinbonded prosthesis. The Rexillium III specimens were treated with $50{\mu}m\;Al_2O_3$ blasting. Type IV gold alloy specimens were treated with $400^{\circ}C$ heating and tin plating method. All specimens were bonded with MBAS composite resin cement and followed by immersion test into the $37^{\circ}C$ water bath for 7 days. The specimens were debonded in tension with an Instron machine and observed with SEM. The modes of failure were recorded also. The following conclusions were obtained : 1. The tensile bond strength decreased in following order. $50{\mu}m\;Al_2O_3$ basted Resillium III group, Type IV gold alloy group treated with $400^{\circ}C$ heat and tin plating type IV gold alloy group, and statistical significant differences were observed(p<0.05). 2. The tensile bond strength decreased in all groups after 7 days immersion test, but statistical significant differences were observed in Rexillium III specimens only. 3. The sharp and irregular surface were observed in Rexillium III, but $400^{\circ}C$ heat treated and tin plated groups had round and broad surface in SEM. 4. The models of bond failure were cohesive-adhesive failure mainly.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1967-1972
• /
• 2007

Photophysical properties of a newly-synthesized porphyrin derivative, trans-bis(ferrocene carboxylato)- (5,10,15,20-tetraphenylporphyrinato)tin(IV) [Sn(TPP)(FcCOO)2] were investigated by means of steady-state and fs-time resolved laser spectroscopic techniques, and compared with those of a standard molecule, trans-dichloro( 5,10,15,20-tetraphenyl-porphrinato)tin(IV) [Sn(TPP)Cl2]. The fluorescence spectrum of Sn(TPP)- (FcCOO)2 was observed to exhibit dual emission bands originating from the S2-state and the S1-state, which was greatly quenched as compared to those of Sn(TPP)Cl2. The fs-time resolved fluorescence and transient absorption spectroscopic measurements revealed that the fluorescence quenching is due to formation of the long-lived charge transfer state by intramolecular electron transfer from ferrocene to the S2-excited SnTPP in addition to the enhanced non-radiative deactivation processes.

• 전기화학회지
• /
• 제3권1호
• /
• pp.15-18
• /
• 2000

태양전지의 전극 기판으로 사용되는 전도성 투명 산화주석 박막의 제조 방법에 대하여 연구하였다. 졸겔법을 이용하여 산화 주석 박막을 제조하는 경우에 저가의 공정으로 대면적의 박막을 얻을 수 있는 장점이 있다. 본 연구에서는 공정 조건의 확립과 전구체의 설정에 중점을 두었다. 전구체 용액을 isopropyl 알코올에 tin isopropoxide를 용해한 용액을 사용하였으며 수화 반응을 억제하기 위하여 triethanolamine(TEA)을 첨가하였다. Corning유리 위에 spinning과 dipping방법을 이용하여 코팅을 하였으며 이후 열처리하여 최종 산화주석 박막을 제조하였다. 이렇게 제조된 박막은 가시광선 영역에서 $90\%$ 이상의 투과도를 보였으며 $0.01\Omega{\cdot}cm$ 이하의 비저항을 나타냈다