• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.285-294
• /
• 2018

In this study, we implemented the data quality monitoring algorithm which is the previous step for real-time Global Navigation Satellite System (GNSS) correction generation and compared Global Positioning System (GPS) and BeiDou System (BDS). Signal Quality Monitoring (SQM), Data QM, and Measurement QM (MQM) that are well known in Ground Based Augmentation System (GBAS) were used for quality monitoring. SQM and Carrier Acceleration Ramp Step Test (CARST) of MQM result were divided by satellite elevation angle and analyzed. The data which are judged as abnormal are removed and presented as Root Mean Square (RMS), standard deviation, average, maximum, and minimum value.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.1-5
• /
• 2006

Finding a valid timing constraint is one of the most important issues in the real-time monitoring area. To get the valid timing constraint, a developer executes a real-time process and changes the constraint on a regular basis. This is an exhaustive and time-consuming process. To improve this approach, we propose a timing constraint search technique. This technique uses two load models and one condition proposed in this paper to support the developer in determining the valid timing constraint range in an easy and systematic manner.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.145-151
• /
• 2021

According to the Korea Augmentation Satellite System (KASS) system milestone, Site Acceptance Test (SAT) has three steps test until the end of the project. SAT#1 is the first time of SAT steps and verify the KASS Reference Station (KRS) and Sub System (S/S) for the monitoring and controllable. After the equipment and software were installed at the Mission Control Center (MCC) with Central Monitoring and Control Simulator (CMS) for the SAT#1, the 1:1 test was progressed when the KRS and S/S are ready to test. SAT#1 has a 10 steps test case and it was progressed each KRS sites. The test was finished throughout the real-time monitoring and the data collection including the data analysis all of the 7 KRS sites. Finally SAT#1 was completed on December 2020 with successfully.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.815-821
• /
• 2021

본 논문은 지상파 기반의 측위·항법·시각(PNT, Positioning, Navigation, and Timing) 서비스의 대표격인 eLoran(enhance LOng RAnge Navigation) 시스템의 시각동기 성능 모니터링 시스템의 설계에 관한 것으로서, GNSS(Global Navigation Satellite System)의 신호 취약성에 따른 시각동기시스템의 한계에 대해 설명하고, 이에 대한 백업시스템으로 대표적 지상파항법시스템인 eLoran 시스템의 시각동기 성능모니터링 시스템에 대해 중점적으로 다룬다. eLoran 시스템을 이용한 시각동기 서비스 및 이에 대한 성능감시를 위한 보정기준국(dLoran, differential Loran) 관점에서의 시각동기 성능모니터링 시스템의 구성과 그 요구성능에 대해 설명한다. 또한 eLoran 테스트베드 환경 내 시각동기 모니터링 시스템의 장기 시범운영을 통해서, eLoran 시각동기서비스의 성능을 분석한다. 시각동기 성능모니터링 시스템을 이용한 성능 분석결과 보정 전 43.71 ns, 보정 후 22.52 ns (rms)의 시각정밀도를 나타내었으며, 이를 통해서 정밀시각 동기원으로 eLoran 서비스가 충분히 GPS 백업 시각동기시스템으로 활용이 가능함을 확인할 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.145-156
• /
• 2016

A variety of methods for indoor positioning systems have been underway to ensure the safety of emergency rescuers who are working in dangerous situations such as fire fighters. However, since most systems display locations of rescue workers in two-dimension (2D)-based maps, it is difficult for a commander located in the outside to recognize locations of rescuers inside the building intuitively. An augmented reality (AR)-based indoor positioning monitoring system can display locations of rescuer inside the building that can be seen by commanders to help intuitive recognition of positioning. To monitor AR-based indoor positioning, it is necessary to have an estimation technique of line of sight vector of observers. In the present study, an estimation technique of a line of sight vector using ultra-wide band tranceiver installed inside the indoor to trace locations is presented.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권2호
• /
• pp.69-77
• /
• 2019

This study introduces MATLAB Graphical User Interface (GUI)-based software to monitor ionospheric disturbances. This software detects ionospheric disturbances using Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) measurements, and estimates a location of the disturbance source through the detected disturbance. In addition, this software includes a sky plot making function and frequency analysis function through wavelet transform. To evaluate the performance of the developed software, data of 2011 Tohoku earthquake in Japan were analyzed by using the software. The analysis results verified that the ionospheric disturbances were detected through GPS and GLONASS measurements, and the location of the disturbance source was estimated through the detected disturbance.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권1호
• /
• pp.1-10
• /
• 2014

Recently, monitoring of two-body ground vehicles carrying extremely hazardous materials has been considered as one of the most important national issues. This issue induces large cost in terms of national economy and social benefit. To monitor and counteract accidents promptly, an efficient methodology is required. For accident monitoring, GPS can be utilized in most cases. However, it is widely known that GPS cannot provide sufficient continuity in urban cannons and tunnels. To complement the weakness of GPS, this paper proposes an accident monitoring method based on a monocular vision sensor. The proposed method estimates angular acceleration from a sequence of image frames captured by a monocular vision sensor. The possibility of using angular acceleration is investigated to determine the occurrence of accidents such as jackknifing and rollover. By an experiment based on actual measurements, the feasibility of the proposed method is evaluated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• 생물환경조절학회지
• /
• 제8권4호
• /
• pp.232-241
• /
• 1999

본 논문에서는 온실재배 토마토에서 수분 상태를 고려한 정밀한 관개를 위하여 경직경의 변화에 근거한 자동관개 시스템을 구현하고자 하였으며 이와 같은 작물적 지표에 의한 관개제어시스템을 포트재배(closed feeding system) 조건과 포장재배 조건의 재배에 적용하여 토마토의 수량과 과실의 품질에 대하여 그 적합도를 평가하였다. 작물적 지표에 의한 관개 자동화를 위하여 경직경 측정 센서를 이용하여 측정한 경직경 일증가량(DI)를 관개 개시점의 결정에 이용하고, 동시에 이때의 관개량을 결정하기 위하여 토마토 증산모델을 적용한 마이크로 컴퓨터 자동관개 시스템을 구현하고 그 성능을 평가하였는데, 이 자동 관개 시스템을 이용하여 관개처리한 결과 포트재배에서는 토양수분에 의한 관개방식보다 수량 및 과실의 당도가 증가하였으나 포장조건에서는 관개방법간에 큰 차이가 없었다. 따라서 경직경 증가에 근거한 관개 개시점을 판단하고 관계량을 결정하는 증산모델을 사용하는 컴퓨터 시스템은 특히 closed feeding System에서 유용하며 토양조건에서는 토양의 상태, 작물의 반응 등을 고려하여 적용하여야 할 것으로 판단되었다.