• ETRI Journal
• /
• v.29 no.5
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.431-436
• /
• 2023

In order to provide continuous Korea Augmentation Satellite System (KASS) services, the operation organization should continuously and systematically perform operations, maintenance, and technical activities. All subsystems of KASS, all Line Replacement Units (LRUs), and Software Replacement Units (SWRUs) should be operated and maintained continuously. In order to effectively manage these activities, it is necessary to develop an Operation Management Tool (OMT). For this purpose, operation management, operation organization, and operation activities were defined. The defined requirements were divided into general, function, interface, and database for OMT development, and functions and decision-making procedures consisting of site/asset/trouble/work order/schedule management were designed. The OMT developed by reflecting the site and asset information as well as the design content met predefined requirements. The OMT will be actively used in actual KASS operation and will evolve by continuously reflecting the additional requirements of operators. Through this tool, KASS will support continuous service provision.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2001

In this paper, a multistage parallel interference canceller (MPIC) and a partial multistage parallel interference canceller (PMPIC) are employed as a technique for improving the performance of the asynchronous DS-CDMA systems. The degree of the effect of the timing errors and phase errors on the interference cancellation capability of two types of cancellers is theoretically analyzed and the computer simulation is performed to confirm the analytical results. From the results, the large performance improvement is obtained by employing MPIC and PMPIC with perfect synchronization over the conventional matched filter, and the performance improvement obtained by MPIC and PMPIC is very close to each other as the number of the stage of MPIC and PMPIC increases. When the timing errors and phase errors are considered (in the case of imperfect synchronization), the performance improvement reduces as the performance degradation at the first stage (no cancellation) has a bad effect on the decision statistics at each stage. However MPIC and PMPIC have the strong interference cancellation capability in spite of imperfect synchronization as the number of the stage increases. An interference canceller, which has the strong interference cancellation capability as well as lower complexity for the implementation, is needed for practical systems with timing errors and phase errors because the perfect synchronization is impossible. Therefore, the excellent tradeoff between complexity and performance offered by PMPIC makes it an attractive approach for practical systems.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.103-118
• /
• 1999

This paper analyzes the performance of symbol timing recovery and equalizer in 8VSB digital terrestrial TV receiver under various multipath signals and proposes equalization techniques which improve indoor reception performance. Data segment sync is used for symbol timing recovery and timing offset is measured for echoes of various delays and amplitudes by using symbol timing detection filter whose pattern is +1. +1. -1. and -1. Measured timing offsets were below 10% for long echoes with more than 5 symbol delay and above 30% for short echoes with around 1 symbol delay. Indoor reception is always more challenging than outdoor reception due to lower signal strength. large and short multipaths. and moving interfering objects. So it is considered to use FSE (Fractionally Spaced Equalizer) which is very robust to timing offset and blind equalizer which can update equalizer tap coefficients even by information data. We compare the performance of conventional DFE (Decision Feedback Equalizer) and FSE-DFE using LMS algorithm and Stop and Go algorithm for the indoor reception. Experiments reveals FSE has excellent performance for large timing offset and Stop and Go algorithm shows good performance for Doppler shift. so we propose to use FSE-DFE structure with Stop and Go algorithm for the reliable indoor reception.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.1-11
• /
• 1996

In this paper, we evaluate the performance of DD-bardner (decision-directed gardner) algorithm. We derive an analytic gain of the thiming detector that is a function of SNR and an excess bandwidth, and verify the result by simulation. We also compare the DD-gardner algorithm with the bardner algorithm with respect to tracking performance and jitter performance under low SNR and a residual frequency component.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.209-220
• /
• 1994

In this paper, we study the timing and equipment of replacement. Those affect both available possibility and technological levels of new equipments in the future. These problems are classified according to technological levels and in consequence generated four circumstance. Models are formulated in this research. These are able to make us decision which we replace equipment at the first time. A method is suggested to find the optimal age for replacement at given each circumstance. A solution procedure and numerical example are given.

• The Journal of Fisheries Business Administration
• /
• v.47 no.4
• /
• pp.1-13
• /
• 2016

Fish mortality is the most important success factor in aquaculture management. To analyze the effect of mortality considering biological and economic condition is a important problem in land-based aquaculture. This study is aimed to analyze the effect of mortality for duration of cultivation in land-based aquaculture. This study builds the mathematical model that finds the value of decision variable to minimize cost that sums up the water pool usage cost, sorting cost, fingerling cost and feeding cost under critical standing corp constraint. The proposed mathematical model involves many aspects, both biological and economical: (1) number of fingerlings (2) timing and number of batch splitting event, based on (3) fish growth rate, (4) mortality, and (5) several farming expense. Numerical simulation model presented here in. The objective of numerical simulation is to provide for decision makers to analyse and comprehend the proposed model. When extensive biological and cost data become available, the proposed model can be widely applied to yield more accurate results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.5
• /
• pp.342-350
• /
• 2013

Dual response surface optimization (DRSO), inspired by Taguchi's philosophy, attempts to optimize the process mean and variability by using response surface methodology. Researches on DRSO were extensively done in 1990's and have been matured recently. This paper reviews the existing DRSO methods from the decision making perspective. More specifically, this paper classifies the existing DRSO methods based on the optimization criterion and the timing of preference articulation. Also, some of case studies are reviewed. Extension to multiresponse optimization, triple response surface optimization, and application of data mining method are suggested as future research issues.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.775-779
• /
• 1999

This paper presents design of AGC(Automatic Gain Control) and DC offset remover suitable for cable modem which makes use of QAM(Quadrature Amplitude Modulation) scheme. Since QAM has multi-level signal characteristic, for high-order QAM, the constellation is dense and the distance of decision boundary between adjacent symbols is short. So AGC and DC offset remover must be designed optionally for preventing performance degradation. AGC is designed into feedback type and is related to the STR(Symbol Timing Recovery)and Paff interpolation algorithm. Whereas AGC need to perform average power detection during many symbols by comparison with the reference power, DC offset remover uses only the instant polarity decision such that simple implementation can be achieved with good performance. Though the AGC and DC offset remover are simulated here only for 256 QAM scheme for convenience'sake, it can be applied to other multi-level QAM or PSK modulation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.117-122
• /
• 2006

In this paper, we present a simple and general soft bit decision expression for a Gray coded PAM signal over additive white Gaussian noise(AWGN) channel with the log likelihood ratio(LLR). In order to reduce the complexity of the LLR calculation, we make the bitwise LLR expression simple by replacing the mathematical max functions of the conventional Max-Log-MAP expression with simple arithmetic functions associated with some deterministic parameters, such as a received value and distance between symbols on a signal space. Taking the implementation issues, like the area of silicon, the power consumption, the timing latency, and so on, into consideration, we submit that the proposed method is a promising alternative way to conventional methods for reconfigurable systems.