• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.402-409
• /
• 2000

To investigate the textural and physical characteristics of WSF(whole soybean flour) tofu affected by coagulant and its concentration, $CaCl_2$, $CaSO_4$, $GDL(glucono-{\delta}\;lactone)$, $MgCl_2$, and some mixed coagulants were used in this study. Yields of WSF tofu coagulated with $CaSO_4$ and GDL were ranged 4.3-4.5(g/g WSF), but common tofu was 2.2-3.0(g/g soybean). As the water addition ratio increased, L and a value were increased while heating time increased, b value increased. L value of WSF tofu was lower and b value was higher than conventional tofu and 4 commercial tofus. Kinds of coagulant and its concentration significantly affected to textural properties of WSF tofu. As the concentration of coagulant increase, the hardness increased in most all coagulants. WSF tofu coagulated with $CaSO_4$ and GDL recorded low hardness and adhesiveness, and high springiness among the used coagulants at the same concentration. As the hardness increased, the gumminess and chewiness increased in most all coagulants. As coagulation temperature and molding pressure increase, hardness also increased. WSF tofu coagulated with 0.3% $CaSO_4+GDL$ was the most similar in the textural properties with conventional tofu and 4 commercial tofus. WSF tofu coagulated with 0.3% of $CaSO_4+GDL$ at $85^{\circ}C$, 10 times water addition, 5min. heating and $25.0g/cm^2$ molding pressure recorded the highest score in the sensory evaluation.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.529-538
• /
• 2003

The objectives of this study were to measure customers' cognition and overall satisfaction, and to identify relatively important attributes for the overall satisfaction, of home-delivered meals. Questionnaires were distributed to 243 customers. The statistical data analyses were completed by x$^2$-tests, ANOV A, factor analysis, reliability analysis and regression analysis using SPSS version 10. 56.6% of customers get obtained information from the internet, with 31.3% of these using this method at least once a week, but 72.9% of customers used this method less than once per years. The major reasons for ordering home-delivered meals were tired of cooking, more economical and no time to cook. The results were significantly different in relation to age, occupation and monthly income. The major reasons for hesitation about ordering home-delivered meals were meals should be prepared in households, not sanitary and the use of too many artificial flavors. The results for this factor were significantly different in relation to gender, age and monthly income(p<0.01). The most preferred kinds of home-delivery meals were Korean soup (guk), stew, soup (tang), speciality dishes and party dishes. The customer's cognition of kindness of the delivery staff was highest, with food temperature being the lowest among the options. The food and service level factors were derived from a factor based analysis of customer's cognition towards home-delivered meals. The customer's cognition of food taste, food quantity, kindness of delivery staff and packaging container shape were significantly different according to the use frequency and use period. The packaging method, sanitation, kindness of delivery staff, price and taste were the most relatively important attributes for overall satisfaction with home-delivered meals.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.333-339
• /
• 2009

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 ${\mu}m$) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/$cm^2$. Teeth were thermocycled fivehundred times between $50^{\circ}C$and $550^{\circ}C$for 30s at each temperature. Electrical conductivity (${\mu}A$) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (${\mu}A$)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.594-598
• /
• 1998

In this study oxidative deterioration of dried sea mussel and baby clam stored at $4{\pm}2^{\circ}C$ and $25{\pm}2^{\circ}C$ were investigated. Acid value of samples were higher at $25^{\circ}C$ than those at $4^{\circ}C$ throughout the storage period. And it was higher in dried baby clam than in sea mussel regardless of storage temperatures. Peroxide value of dried sea mussel and baby clam stored at $25^{\circ}C$ tended to decrease after 30 and 60 days, respectively. Thiobarbituric acid and carbonyl value of samples stored at $4^{\circ}C$ were higher than those stored at $25^{\circ}C$ throughout the storage period. In case of sea mussel, However they were lower stored at $4^{\circ}C$ than at $25^{\circ}C$ in 30 days. Amino nitrogen increased until 60 days and then decreased in all samples. Fluorescence intensity associated with interaction between carbonyl compound and amino compound was increased with storage temperature and time but it decreased slowly after 60 days.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.3-12
• /
• 2006

The feasibility for the employment of manganese nodule as an adsorbent for $SO_{2}$ gas has been investigated. The specific surface area of manganese nodule particle, which used in the experiments, was ca. $221.5m^{2}/g$ and the content of sulfur in manganese nodule was observed to significantly increase after $SO_{2}$ was adsorbed on it. The EPMA for the distilled water-washed and methanol-washed manganese nodule particle after $SO_{2}$ adsorption showed that its sulfur content was slightly decreased to 14.7% and 13.1% respectively, from 15.4% before washing. The XRD analysis of manganese nodule showed that todorokite and birnessite, which are manganese oxides, and quartz and anorthite were the major mineralogical components and weak $MnSO_{4}$ peaks were detected after $SO_{2}$ was adsorbed on manganese nodule. For an comparative investigation, limestone was also tested as an adsorbent for $SO_{2}$, however, no peaks for $CaSO_{4}$ were found by XRD analysis after the adsorption of $SO_{2}$. As the size of adsorbent increased, time for breakthrough was decreased and the adsorbed amount of $SO_{2}$ was also diminished. The $SO_{2}$ adsorption was hindered when its flow rate became high and the adsorption capacity of manganese nodule was observed to be superior to that of limestone. In addition, the mixture of manganese nodule and limestone did not show an increase in the adsorption of $SO_{2}$. Finally, as the temperature was raised, the adsorbed amount of adsorbate on manganese nodule was found to be decreased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.926-934
• /
• 2006

The base for preparing oyster hydrolysate-added yogurt was consisted of whole milk (1,000 mL), skim milk (44.05 to 42.05 g), enzymatic oyster hydrolysates powder (OHP, 0 to 2.0 g) and pectin. The yogurt base was fermented with 7 kinds of starter cultures (3% based on yogurt volume), such as Lactobacillus acidophilus, lactobacillus bulgaricus, lactobacillus casei, Lactobacillus fermentum, Lactobacillus pentosus, Streptcoccus thermophilus and the mixed starters (L. bulgaricus and S. thermophilus) at optimal temperature. Processing condition and quality characteristics of the yogurt were evaluated by analyzing pH, titratable acidity, viscosity, viable cell count, functional properties and sensory evaluation. The results suggested that the optimal conditions for preparing the good quality yogurt revealed the mixed starters (L. bulgaricus and S. thermophilus) for starter culture, 1.0 g of 3 kDa hydrolysate for amount, and 5.5 hrs for fermentation time. The good quality yogurt showed 4.31 for pH, 1.07% for titratable acidity, 469 cps for viscosity and $4.9{\times}10^8\;CFU/mL$ for viable cell count. The hydrolysate-added yogurt was 2 times higher in ACE inhibitory and antioxidant activities than commercial yogurt, and kept good quality during storage of 15 days at $5^{\circ}C$.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.47-57
• /
• 1989

T. verrucosum infection has been reported for the first time in 1986 in Korea and has been increasing progressively. To evaluate the progress of clinical and histopathological change of dermatophytosis caused by T. verrucosum, inoculation study, using T. verrucosum isolated from infected human(human strain) and from infected cattle(cattle strain), was done in 24 male albino Hartley guinea pig. Their clinical and histopathological changes were evaluated. In addition, comparison for the growth rate between human strain and cattle strain on Sabouraud's glucose agar was made. The results were as follows: 1. Growth rate on Sabouraud's glucose agar : Cattle strain showed significantly more rapid growth rate than human strain on Sabouraud's glucose rate at $25^{\circ}C$ and $37^{\circ}C$. And cattle strain showed more rapid growth rate at $37^{\circ}C$ than $25^{\circ}C$. But human strain showed no significant difference of growth rate at both temperature. 2. Clinical findings: Initial erythema, scale and crust were developed about 8th after inoculation. All three findings reached maximum severity about 12th to 16th day and disappeared about 30th to 34th day after inoculation. There was no significant difference in progress of erythema, scale and crust between cattle strain and human strain. 3. Histopathological findings: Although mild acanthosis was noticed on the 3rd day after inoculation, the other findings including parakeratosis, intraepidermal abscess, spongiosis and vascular change, cellular infiltration were found on 9th day after inoculation. They reached maximum severity on the 12th day and lasted to the 25th day after inoculation. After that, all three findings were decreased gradually between 29th day and 33th day. On the PAS stainings, hyphae and spores were found on the 6th day and disappeared on the 21th day after inoculation. 4. In trichophytin skin test, all of the 24 guinea pigs became positive within average $9.83{\pm}1.17$ lays. These findings suggested that dermatophytosis caused by T. verrucosum induced rapid cell mediated immunity and contributed to rapid resolution of the lesion.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.308-313
• /
• 2008

"Jeokjoong", a white winter wheat (Triticum aestivum L.) variety was developed from the cross "Keumkang"/"Tapdong". "Jeokjoong" is an awned, semi-dwarf and soft white winter wheat, similar to "Keumkang" (check variety). The heading and maturing date of "Jeokjoong" were similar to "Keumkang". Culm and spike length of "Jeokjoong" were 78 cm and 7.5 cm, similar to "Keumkang". "Jeokjoong" had lower test weight (800 g) and lower 1,000-grain weight (40.1 g) than "Keumkang" (811 g and 44.0 g, respectively). It had resistance to winter hardiness, wet-soil tolerance and lodging tolerance. "Jeokjoong" showed moderate to scab in test of specific character although "Keumkang" is susceptible to scab. "Jeokjoong" had lower flour yield (69.2%) and ash content (0.36%) than "Keumkang" (72.0% and 0.41%, respectively) and similar flour color to "Keumkang". It showed lower protein content (8.9%) and SDS-sedimentation volume (36.8 ml) and shorter mixograph mixing time (3.5 min) than "Keumkang" (11.0%, 59.7 ml and 4.5 min, respectively). Amylose content and pasting properties of "Jeokjoong" were similar to "Keumkang". "Jeokjoong" had softer and more elastic texture of cooked noodles than "Keumkang". Average yield of "Jeokjoong" in the regional adaptation yield trial was 6.19 MT ha-1 in upland and 5.33 MT/ha in paddy field, which was 19% and 16% higher than those of "Keumkang" (5.21 MT/ha and 4.58 MT/ha, respectively). "Jeokjoong" would be suitable for the area above the daily minimum temperature of $-10^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.44-50
• /
• 2009

"Sukang", a winter wheat (Triticum aestivum L.) cultivar was developed by the National Institute of Crop Science, RDA. It was derived from the cross "Suwon266" / "Asakaze" during 1994. "Sukang" was evaluated as "Iksan312" in Advanced Yield Trial Test in 2005. It was tested in the regional yield trial test between 2006 and 2008. "Sukang" is an awned, semi-dwarf and hard winter wheat, similar to "Keumkang" (check cultivar). The heading and maturing date of "Sukang" were similar to "Keumkang". Culm and spike length of "Sukang" were 90 cm and 8.1 cm, longer culm length and similar spike length compared to "Keumkang" (80 cm and 7.9 cm, respectively). "Sukang" had similar test weight (819 g/L) and lower 1,000-grain weight (40.2 g) than "Keumkang" (813 g/L and 44.9 g, respectively). "Sukang" showed resistance to winter hardiness and pre-harvest sprouting, which lower withering rate on the high ridge (4.5%) and rate of pre-harvest sprouting (0.2%) than "Keumkang" (21.9% and 30.4%, respectively). "Sukang" had lower flour yield (71.1%) and higher ash content (0.45%) than "Keumkang" (74.1% and 0.42%, respectively). "Sukang" showed lower lightness (89.13) and higher yellowness (10.93) in flour color than "Keumkang" (90.02 and 9.28, respectively). It showed higher protein content (12.8%) and gluten content (11.1%) and lower SDS-sedimentation volume (56.8 ml) and mixing time of mixograph (2.6 min) than "Keumkang" (11.9%, 10.2%, 62.3 ml and 4.7 min, respectively). Fermentation properties, amylose content and pasting properties of "Sukang" were similar to "Keumkang". "Sukang" showed different compositions in high molecular weight glutenin subunits (HMW-GS, $2^{\ast}$, 13+16, 2+12) and puroindolines (pina-1b/pinb-1a) compared to "Keumkang" ($2^{\ast}$, 7+8, 5+10 in HMW-GS and Pina-1a/Pinb-1b in puroindolines, respectively). "Sukang" showed lower hardness (4.53 N) and similar springiness and cohesiveness of cooked noodles (0.94 and 0.63) compared to "Keumkang" (4.65 N, 0.93 and 0.64, respectively). Average yield of "Sukang" in the regional adaptation yield trial was 5.34 MT/ha in upland and 4.72 MT/ha in paddy field, which was 4% and 1% lower than those of "Keumkang" (5.55 MT/ha and 4.77 MT/ha, respectively). "Sukang" would be suitable for the area above $-10^{\circ}C$ of daily minimum temperature in January in Korean peninsula.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.60-67
• /
• 2019

A valuable metal recovery from waste resources such as spent rechargeable secondary batteries is of critical issues because of a sharp increase in the amount of waste resources. In this context, it is necessary to research not only recycling waste lithium-ion batteries (LIBs), but also reusing valuable metals (e.g., Li, Co, Ni, Mn etc.) recovered from waste LIBs. In particular, the lithium hydroxide ($LiOH{\cdot}xH_2O$), which is of precursors that can be prepared by the recovery of Li in waste LIBs, can be reused as a catalyst, a carbon dioxide absorbent, and again as a precursor for cathode materials of LIB. However, most studies of recycling the waste LIBs have been focused on the preparation of lithium carbonate with a recovery of Li. Herein, we show the preparation of high purity lithium hydroxide powder along with the precipitation process, and the systematic study to find an optimum condition is also carried out. The lithium carbonate, which is recovered from waste LIBs, was used as starting materials for synthesis of lithium hydroxide. The optimum precipitation conditions for the preparation of LiOH were found as follows: based on stirring, reaction temperature $90^{\circ}C$, reaction time 3 hr, precursor ratio 1:1. To synthesize uniform and high purity lithium hydroxide, 2-step precipitation process was additionally performed, and consequently, high purity $LiOH{\cdot}xH_2O$ powder was obtained.