• 지질학회지
• /
• 제54권6호
• /
• pp.615-630
• /
• 2018

분지 해석은 퇴적분지의 형성과 진화를 이해하기 위한 연구 분야로서 여러 종류의 지구과학 자료들을 종합적으로 분석해야 하며, 분지의 시공간적 발달을 입체적으로 구현하기 위해서는 모델링 기술이 적용된다. 분지해석과 모델링 연구를 위해 2016년 MATLAB 기반의 프로그램 BasinVis 1.0이 공개되었으며 최근에는 새로운 기능과 수정된 사용자 인터페이스를 포함한 BasinVis 2.0이 개발되었다. 이 연구에서는 BasinVis 2.0을 이용한 분지 모델링을 소개하기 위해 비엔나 분지의 남부에서 사례 연구를 수행하였다. 이 연구는 BasinVis 1.0을 이용한 비엔나 분지 중북부의 모델링 연구와 함께 앞으로 수행될 비엔나 분지 전지역의 모델링을 위한 예비 연구로서, 연구 지역의 마이오세 퇴적층과 침강 발달을 시공간적으로 구현하였다. 마이오세 초기의 후반 동안 퇴적과 침강은 북동-남서 방향의 주향이동 단층과 안행성 점완 정단층들을 따라 빠르게 나타난다. 하지만 마이오세 중기부터 후기까지 침강은 급격히 감소한다. 이는 인리형 시스템의 발달에 연관하며, 주향이동 분지의 단기간의 빠른 지구조 침강 패턴과 일치한다. 마이오세 중기의 침강은 주로 주향이동 단층을 따라서 나타나는 반면, 마이오세 중기 후반부터는 북-남 방향의 점완 정단층을 따라 저지대로 퇴적 중심지가 이동되었다. 이는 광역적 고응력장이 북동-남서 방향의 횡인장에서 동-서 방향의 인장으로 변화하는 것과 일치한다. 이 연구에서는 다양한 기능과 기법들이 사례 연구에 적용되었으며, 모델링 결과는 BasinVis 2.0이 분지 모델링 연구에 효과적으로 적용 가능함을 보여준다.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1039-1052
• /
• 2002

This paper presents an application where a Fuzzy-Logic Controller (FLC) is used at a supervisory level to implement mutual coordination of the steering of the two front wheels of a motorcar. The two front wheels are steered by two independent discrete time state feedback controllers with a view to optimize the steering slip angles. The functions of the two controllers are tied together by way of a FLC. Because of the presence of unmodelled dynamics and disturbances acting on the two sides, it is difficult to achieve the desired performance using conventional control systems. This is the primary reason that FLC is emploged to solve the problem. The results show that the implemented system achieved desired coupling between the two independent systems and thereby reduces the difference between the two steered angles.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.139-144
• /
• 2004

This study aims to analyze the accuracy of rover speed change in route surveying using RTK-GPS. Route surveying methods using GPS contain Static, DGPS, and RTK-GPS. Much research of navigation system, positioning of vehicles by DGPS, and accuracy analysis by GPS surveying have already been done. From this study, it is firstly found that DGPS is suitable for car navigation and sea navigation with an error of meter scale but not good for detailed construction, designing maps and updating GIS databases. Secondly, RTK-GPS can be used for managing gas pipes, water supply and drain pipes and fiber-optic cable that are needed to be controlled in a real time basis. Thirdly, since the accuracies of route surveying by RTK-GPS and DGPS are not correctly matched with the change of rover speed, the choice of route surveying method from those two should follow the need of accuracy fidelity Further study should focus on Cycle Slip problem and coordinate change problem in tunnel and mountainous areas.

• 자원환경지질
• /
• 제27권2호
• /
• pp.209-212
• /
• 1994

Cheju Island was formed by volcanic activity probably related to the inferred geodynamics in the early Quaternary times. Paleostress analysis, in spite of a few fault slip data collected near Sanbangsan trachyte dome (dated 0.87 Ma) represents an extentional tectonic event with the direction ENE-WSW. Joint anayses in the vicinity of Seahwa reveal three extensional tectonic events of directions NW-SE, NE-SW and ENE-WSW. Especially the extensional event with the direction ENE-WSW affected the whole Cheju area during the most recent time.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.273-275
• /
• 2014

An ammonia fuel system is developed and applied to both a spark ignition engine and a compression ignition engine to use ammonia as primary fuel in this study. Ammonia is injected separately into the intake manifold in liquid phase while gasoline or diesel is also injected as secondary fuel. As ammonia burns 1/6 time slower than gasoline or diesel, the spark or diesel injection timing is needed to be advanced to have better combustion phasing. The test engine showed quite high variation in the power output with large amount of ammonia. The final goal of the study is to implement a methodology to ignite ammonia-air mixture and have complete combustion without any use of the conventional fuels.

• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.176-181
• /
• 2008

철도차량의 차륜과 레일 시스템을 모사한 스킬소음 발생장치를 통해 실험을 수행하여 관련 원리를 실험적으로 증명하고 스킬소음 발생 메커니즘에 대한 체계적인 연구를 수행하였다. 이를 위해 스킬소음발생 메커니즘 연구를 소음원-전달계-반응계의 단계별로 진행하였다. 또한 차륜과 레일간의 스틱-슬립 운동에 의한 상대속도 또는 미끄러지는 수준과 마찰결과로서 계산되는 크립곡선과 발생 음압을 시간 및 주파수 영역에서 관찰하여 스킬 소음이 발생하는 조건을 살펴보았다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.146-152
• /
• 2002

Mold level control has been a major control task for continuous casting plants. The system involves nonlinearities such as stick-slip friction in the sliding gate, time-delay, friction force variations between molten steel and the inner wall of mold, and nozzle logging/unclogging. These complex problems should be solved to control mold level for steel cast. In this paper, we propose a neural fuzzy mold level control technique for solving these complex problems and give experiment studies to show the mold level control in continuous casting process.

• 한국지능시스템학회논문지
• /
• 제7권4호
• /
• pp.29-39
• /
• 1997

A discrete model reference control scheme for a vehicle four wheel steering system(4WS) is proposed and evaluated for a class of discrete time nonlinar dynamics. The schmen employs a neural network to identify the plan systems, wher the neural network estimates the nonlinear dynamics of the plant. The algorithm is proven to be globally stable, with tracking errors converging to the neighborhood of zero. The merits of this scheme is that the global system stability is guaranteed. Whith thd resulting identification model which contains the neural networks, the parameters of controller are adjusted. The proposed scheme is applied to the vehicle active four wheel system and shows the validity and effectiveness through simulation. The three-degree-of freedom vehicle handling model is used to investigate vehicle handing performances. In simulation of the J-turn maneuver, the yaw rate overshoot reduction of a typical mid-size car is improved by 30% compared to a two wheel steering system(2WS) case, resulting that the proposed scheme gives faster yaw rate response andl smaller side slip angle than the 2WS case.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.161-167
• /
• 2001

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.750-753
• /
• 2005

An equivalent linearization technique based on Rayleigh peak distribution for friction damper and brace system (FDBS) under stochastic excitation is proposed. For verification, shaking table test of a small scale 3-story building model with the FDBS is conducted for various slip moment levels. Using experimental result, equivalent linearization of the FDBS is conducted based on Rayleigh peak distribution, which is compared with measured peak distribution. For comparative study, model updating technique is applied based on identified modal properties. Finally, complex modal analysis and time history analysis for the obtained equivalent linear systems are conducted and compared with experimental result