Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristic of Fatigue Properties with Tension and Bending Loading Using High Strength Steel Wire

고강도 강선의 인장 및 회전굽힘 피로특성

  • 우병철 (한국전기연구소 신소재응용연구그룹) ;
  • 김상수 (한국전기연구소 신소재응용연구그룹) ;
  • 김병걸 (한국전기연구소 신소재응용연구그룹) ;
  • 서창민
  • Published : 2001.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

Keywords

References

  1. Robert M. Brunair, 1988, 'An Experimental Evaluation of SoN Curves and Validity of Miner's Cumulative Damage Hypothesis for an ACSR Conductor,' IEEE Transactions on Power Delivery, Vol. 3, No. 3, pp. 1131-1140 https://doi.org/10.1109/61.193895
  2. Gibson, P. T., 1993, 'Bending Fatigue Tests of Ropes and Cables,' Proceedings, MTS'93, MTS
  3. Havard, D.G., 1992, 'Aged ACSR Conductors,' IEEE Transaction on Power Delivery, Vol. 7, No. 2, pp. 581-587 https://doi.org/10.1109/61.127052
  4. 서창민, 김경렬, 1997, '세라믹 코팅된 1Cr-1Mo-0.25V강의 피로균열성장 특성,' 대한기계학회논문집(A) 제21권, 제10호, pp. 1674-1682
  5. Suh C.M., Lee J.J., Kang Y.G., Ahn H.J. & Woo B.C., 1992, 'A Simulaton of the Fatigue Crack Process in Type 304 Stainless Steel at $538^{circ}C$,' Fatigue Fract. Engng. Mater. Struct., Vol. 15-7, pp. 671-684
  6. Suh C.M. and Woo B.C., 1999, 'Simulation of Thermal Stress on Thermoelectric Generator Using Constrained Aluminum Tube with Key Joints,' Pro. of Inter. Conference on Advanced Materials Development & Performance, pp. 900-905
  7. Katagire K., Sato T. and Shin H.S., 1997, ' Effects of Drawing Strain and Bluing on the Fatigue Strength of Eutectoid Steel Wires,' Fatigue Fract. Engng. Struct. Mater. Struct., Vol. 20, No. 12, pp. 1677-1686
  8. 우병철, 김상수, 김병걸, 1999, '가공송전선(ACSR)용 강선의 피로특성,' 대한기계학회 추계학술대회 논문집 A, pp. 90-95
  9. Nahm S.H., Lee H.M. and Suh C.M., 1996, 'A Study on Observation and Growth Behavior of Small Surface Cracks by Remote Measurement System,' KSME Inter. Journal, Vol. 10-4, pp. 396-404