• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.240-247
• /
• 2004

In order to transmit data at high speed in the wireless environment, OFDM is selected as the transmission method of various high-speed wireless communication system since it has the advantage to deal easily the serious selective frequency fading channel by the multiple path. We evaluate STBC-OFDM and linear STBC-OFDM combining with a class of recently proposed linear scalable space-time block codes and OFDM in MIMO channel environments, and demonstrate the performance for spatial multiplexing and diversity gain. The codes are able to use jointly transmit diversity in combination with spatial multiplexing, and achieve spatial and temporal diversity. Frequency diversity of frequency selective channels can be utilized by combining the linear STBC and OFDM. Simulation results are shown to demonstrate the better performance of proposed approach in comparison with STBC-OFDM.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.831-837
• /
• 2010

Optimal conditions of 40 Gbps RZ format for implementation of optical time division multiplexing/wavelength division multiplexing (OTDM/WDM) transmission system are induced by analyzing and comparing performance depending on duty cycle and extinction ratio (ER). Optical phase conjugator (OPC) and inline dispersion management (DM) are applied into optical transmission links for compensating signal distortion due to chromatic dispersion and nonlinearity of fiber. It is confirmed that RZ format of 0.25 duty cycle is less effected by system performance change depending on ER and it is suitable for multiplexing to 160 Gbps signal through OTDM. Also, it is shown that performance improvement of RZ format determined by same net residual dispersion (NRD) is more increased as residual dispersion per span (RDPS) becomes large.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.2
• /
• pp.88-97
• /
• 2003

Computer simulations of the recording and reading of holograms in an 8-bit phase-code multiplexing system are presented. From the computer simulation each recording time of eight holograms is obtained such that the strength of restored holograms is same. An analytic formula to predict the recording times is derived by fitting the formula to the computer simulation data. It is found that our analytic formula can predict the hologram recording time not only in 8-bit system but also in 16-bit and 32-bit systems in an error less than $\pm$8.4%. Optical experiments are also performed in a 4-bit phase code-multiplexing system. It is found that the strength of the restored holograms is more uniform compared with conventional methods.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.244-249
• /
• 2015

High-altitude electromagnetic pulse (HEMP) is generated from a nuclear burst at high altitudes above the Earth, the electromagnetic fields reach the ground nearly simultaneously with regard to the operation time of systems. The aim of this analysis is to inquire about HEMP characteristics and to analyze about effect in orthogonal frequency division multiplexing (OFDM) system. Specifically, HEMP characteristics are classified field sources, spatial coverage, time domain behavior, frequency spectrum and field intensities in this study. Bits error rate (BER) of the receiver with the software simulation is confirmed for the HEMP effect. Q-factor made a difference about interference duration by transfer characteristics of system. When Q factor is smaller, the recovery time from HEMP interference is short. To the contrary, if the Q factor is larger, the recovery duration is lasted longer by 300-600%.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.76-83
• /
• 2010

This paper presents the multi-user autostereoscopic 3D display system constructed and operated by the authors using the time-multiplexing approach. This prototype has three main advantages over the previous versions developed by the authors: its hardware was simplified as only one optical array is used to create viewing regions in space, a lenticular multiplexing screen is not necessary as images can be produced sequentially on a fast 120Hz LCD with full resolution, and the holographic projector was replaced with a high-frame-rate digital micromirror device (DMD) projector. The whole system in this prototype consists of four major parts: a 120Hz high-frame-rate DMD projector, a 49-element optical array, a 120Hz screen assembly, and a multi-user head tracker. The display images for the left/right eyes are produced alternatively on a 120Hz direct-view LCD and are synchronized with the output of the projector, which acts as a backlight of the LCD. The novel steering optics controlled by the multiuser head tracker system directs the projector output to regions referred to as exit pupils, which are located in the viewers’eyes. The display can be developed in the "hang-on-the-wall"form.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.60-76
• /
• 2000

Early detection in real-time response of slope movements ensures tremendous saving of lives and repair costs from catastrophic disaster Therefore, it is essential to constantly monitor the performance and integrity of slope-stabilizing structures such as Rock bolt, Nail and Pile during or after installation. We developed a novel monitoring system using Fiber Bragg Grating (FBG)sensor. It's advantages are highly sensitivity, small dimension and electro-magnetic immunity. capability of multiplexing, system integrity, remote sensing - these serve real-time health monitoring of the structures. Real-time strain measurement by the signal processing program is shown graphically and it gives a warning sound when the monitored strain state exceeds a given threshold level so that any sign of abnormal disturbance on the spot can be easily perceived.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2016

Recently, researches about the communication between LED array and the camera (alias 'Visual-MIMO'), have been actively conducted, and the application to the vehicle and a smart phone is expected to be maximized. Since the bit error may occur if the ISI is severe in a LED array, it is necessary to switch from the multiplexing to the diversity mode. In this paper, according to the use or not of a reference array pattern, a method for determining the transition time to the diversity mode is suggested and verified. When using the reference pattern, it determines the transition time to the diversity mode from the multiplexing using the brightness information of the received image. If the reference array pattern is not used, the size of LED array compared to the entire image according to the distance is used and the size of the LED array at the distance of a severe ISI may be used for the determination of transition time to the diversity. Finally, the proposed method is verified through the simulation and hardware experiments as well as by analyzing the performance in accordance with the ISI level and the distance.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.80-84
• /
• 2007

In this paper, the introductory study of the multi input multi output (MIMO) techniques for satellite communication systems is presented. Because of the advantage of wide coverage of satellite, it has been considered for broadcasting services and fill-in services. On the other hand, state of the art multi input multi output (MIMO) techniques such as space time code (STC) and spatial multiplexing (SM) makes the terrestrial system increase link performance and their coverage, and also increase the link throughput. For these regard, in order to satisfy the requirements of the next generation communications and coexists with terrestrial systems harmoniously, the studying about satellite MIMO techniques is necessary. In this paper, we introduce some system model and scenarios to apply MIMO technique to intermediate module repeater (IMR). The possibility of these techniques and technical requirements are also considered. Especially, Space time code is used to enhance IMRs coverage and increase the link performance, and space time multiplexing is utilized to multiplex satellite broadcasting signals with local broadcasting signal in IMR cell.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.75-83
• /
• 2007

Orthogonal frequency division multiplexing (OFDM) systems with multiple transmit antennas can exploit space-time block coding on each subchannel for reliable data transmission. Spacetime coded OFDM systems, however, are very sensitive to time variant channels because the channels need to be static over multiple OFDM symbol periods. In this paper, we propose to mitigate the channel variations in the frequency domain using a linear filter in the frequency domain that exploits the sparse structure of the system matrix in the frequency domain. Our approach has reduced complexity compared with alternative approaches based on time domain block-linear filters. Simulation results demonstrate that our proposed frequency domain block-linear filter reduces computational complexity by more than a factor of ten at the cost of small performance degradation, compared with a time domain block-linear filter.