• IE interfaces
• /
• v.18 no.4
• /
• pp.494-503
• /
• 2005

This paper considers the problem of performance analysis for the multiplexer, when homogeneous periodic on-off sources are statistically multiplexed. Periodic on-off source model is defined that on-period and off-period are repeated by once in a deterministic periodic time and in on-period, cell arrives with deterministic time interval. In order to reflect periodicity of source model, we consider two multiplexing situation, such as random multiplexing and synchronized multiplexing. In both case, we obtain the overload-period distribution in the multiplexer, and an approximate method using the overload period distribution is suggested for obtaining the CLP(Cell Loss Probability) in the buffer of the multiplexer. A numerical example using MPEG-I real traffic samples and the results are also presented.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.338-341
• /
• 2005

This paper proposes a control system for a Galvano meter which can be used in angle multiplexing for a holographic data storage. Due to the small angle multiplexing selectivity and the exposure/delay time of a CCD camera, the system needs to be controlled to satisfy the performance specification. First, the mathematical model is derived by combining the electrical and mechanical dynamic equations. Then, the obtained model was tuned by the experiments. Finally, a PID controller using DSP was designed and was applied the holographic system. From this approach, we successfully meet the performance specification.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.306-307
• /
• 2015

본 논문에서는 ATSC (Advanced Television Systems Committee) 3.0 시스템을 위한 LDM (Layered Division Multiplexing) 기술을 제안하고, 그 성능을 전산실험을 통해 분석한다. 제안된 LDM 시스템은 기존의 TDM (Time Division Multiplexing) / FDM (Frequency Division Multiplexing) 기술에 비해 약 3 에서 9 dB 의 성능 이득을 나타낸다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.3
• /
• pp.63-69
• /
• 2001

Smartcard is highlighted as infrastructure that has an excellent security for executing functions such as user authentication, access control, information storage and control, and its market is expanding rapidly. But possibilities of forgery and alteration by hacking are increasing as well. This paper proposes a method to prevent card forgery and alteration using angular multiplexing and private key multiplexing method on optical encryption, and proposed a Public Key Infrastructure(PKI)-based authentication system combined with One-Time Password (OTP) for verification of forgery and alteration .

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.578-580
• /
• 2013

Recently, personal mobile devices increased according to the rise of smart devices. Thus the all smart devices load with a bluetooth of standard specifications. However, it is deficiency to service using multiple connection of bluetooth device connection limit. Also bluetooth have other problem. bluetooth can't data communication until all device connection. In this paper, we proposed multi-connect algorithm based on TDM using AT command to overcome the problems above. As a result, it is confirmed that the real-time connectivity and data transmission between multiple devices is possible.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.77-83
• /
• 2011

In this paper, we study the throughput-delay tradeoff of OFDMA systems in context of 2-dimensional resource allocation, and analyze the effect of frequency diversity and user-multiplexing in time domain that has on delay QoS performance. Based on the analysis results, we investigate the impacts of delay QoS on spectral efficiency. In high SNR regime, the optimal DoM (degree of multiplexing) maximizing the spectral efficiency is identified. The results of the high SNR analysis can give us an intuition on an efficient resource allocation policy. Finally, through the simulation results, we verify that our approach with its optimal DoM yields substantial capacity gain.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.70-76
• /
• 2012

In this paper, we propose a power allocation scheme of the unlicensed user based on orthogonal frequency division multiplexing (OFDM) in the TV white space (TVWS). Power constraints in TVWS should be satisfied in the time domain. However, because OFDM has high PAPR (peak-to-average power ratio), it is difficult to satisfy power constraints of TVWS in the time domain. Furthermore, the conventional power allocation schemes cannot be generally applied to unlicensed user in TVWS. Therefore, we propose a power allocation scheme to satisfy power constraints of TVWS by reducing PAPR in the time domain. In addition, we analyze the capacity of the unlicensed user based on OFDM in a closed form. Based on the capacity analysis, as the number of subcarriers decreases, the capacity can be enhanced. In simulation results, we show that the capacity of the unlicensed user increases, as the number of subcarriers decreases and the mean of the channel between the transmitter and the receiver of the unlicensed user increases.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.3
• /
• pp.205-212
• /
• 2017

This paper focuses on worst-case delay analysis of the time-triggered IEEE 802.15.4 protocol to satisfy the industrial quality-of-service (QoS) performance. The IEEE 802.15.4 protocol is considered to be unsuitable for industrial networks because its medium access control method is contention-based CSMA/CA, which exhibits unstable performance with an unbounded delay distribution under heavy traffic. To avoid these limitations, this paper presents a time-triggered version of the nonbeacon-enabled network of IEEE 802.15.4 that relies on a time division multiplexing access (TDMA) method implemented in the application layer without any modification of specification. The timing analysis of this time-triggered IEEE 802.15.4 was executed, and the worst-case transmission delay was calculated. Based on this analysis, the time-triggered IEEE 802.15.4 is a promising alternative for wireless industrial networking.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3790-3797
• /
• 2021

Although the individual channel readout method can improve the performance of PET detectors with pixelated photo-sensors, such as silicon photomultiplier (SiPM), this method leads to a significant increase in the number of readout channels. In this study, we proposed a novel multiplexing method that could effectively reduce the number of readout channels to reduce system complexity and development cost. The proposed multiplexing circuit was designed to generate bipolar pulses with different zero-crossing points by adjusting the time constant of the high-pass filter connected to each channel of a pixelated photo-sensor. The channel position of the detected gamma-ray was identified by estimating the width between the rising edge and the zero-crossing point of the bipolar pulse. In order to evaluate the performance of the proposed multiplexing circuit, four detector blocks, each consisting of a 4 × 4 array of 3 mm × 3 mm × 20 mm LYSO and a 4 × 4 SiPM array, were constructed. The average energy resolution was 13.2 ± 1.1% for all 64 crystal pixels and each pixel position was accurately identified. A coincidence timing resolution was 580 ± 12 ps. The experimental results indicated that the novel multiplexing method proposed in this study is able to effectively reduce the number of readout channels while maintaining accurate position identification with good energy and timing performance. In addition, it could be useful for the development of PET systems consisting of a large number of pixelated detectors.