• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.228-234
• /
• 2000

The vibration characteristics of the pad fluttering in a fluid film tilting pad journal bearing(4-pad LBP) have been investigated experimentally under the different values of oil supply flow rate, bearing load and shaft speed. The vibration characteristics of the pad fluttering are estimated by measuring the time signal of circumferential distribution of the film thickness and the cascade plot of the response of the relative displacement between the bearing and the shaft. It is shown that the vibration frequency of the pad fluttering has a sub-synchronous frequency and 31mos1 does not change by the increase of shaft speed. However the vibration amplitude is increased by the increase of shaft speed. From those experimental results, pad fluttering can be thought of as a self-excited vibration. The incipient pad fluttering velocity is increased by the increase of oil supply rate and by the decrease of bearing load. It is observed that the vibration amplitude of the pad fluttering can be decreased by the control of supply oil flow rate effectively. And also It is known that the outbreak of pad fluttering does not concern with the shaft vibration.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.395-402
• /
• 2001

An induction thermal plasma system have been newly designed for advanced operation with a pulse modulated mode to control the plasma power in time domain and to create non-equilibrium effects such as fast quenching of the plasma to produce new functional materials in high rate. The system consists of MOSFET power supply with a maximum power of 50 kW with a frequency of 460 kHz, an induction plasma torch with a 10-turns coil of 80 mm diameter and 150 mm length and a vacuum chamber. The pulse modulated plasma was successfully generated at a plasma power of 30 kW and a high pressure of 100 kPa, with taking the on and off time as 10 ms, respectively. Measurements were carried out on the time-dependent spectral lines emitted from Ar species. The dynamic behavior of plasma temperature in a pulse cycle was estimated by the Boltzmann plot and the excitation temperature of Ar atom was found to be changed periodically from around 0.5 to 1.7 eV during the cycle. Two application regions of the induction thermal plasma newly generated were introduced to material processing with high rate synthesis based on non equilibrium effects, and to the finding of new arc quenching gases coming necessary for power circuit breaker, which is friendly with earth circumstance alternative to SF6 gas.

• 한국IT서비스학회지
• /
• 제20권3호
• /
• pp.1-12
• /
• 2021

Reactor Coolant Pump (RCP) is core part of nuclear power plant to provide the forced circulation of reactor coolant for the removal of core heat. Properly monitoring vibration of RCP is a key activity of a successful predictive maintenance and can lead to a decrease in failure, optimization of machine performance, and a reduction of repair and maintenance costs. Here, we developed real-time RCP Vibration Analysis System (VAS) that web based platform using NoSQL DB (Mongo DB) to handle vibration data of RCP. In this paper, we explain how to implement digital signal process of vibration data from time domain to frequency domain using Fast Fourier transform and how to design NoSQL DB structure, how to implement web service using Java spring framework, JavaScript, High-Chart. We have implement various plot according to standard of the American Society of Mechanical Engineers (ASME) and it can show on web browser based on HTML 5. This data analysis platform shows a upgraded method to real-time analyze vibration data and easily uses without specialist. Furthermore to get better precision we have plan apply to additional machine learning technology.

• Coupled systems mechanics
• /
• 제2권2호
• /
• pp.159-174
• /
• 2013

The present work aims at investigating the nonlinear dynamics, bifurcations, and stability of an axially accelerating beam with an intermediate spring-support. The problem of a parametrically excited system is addressed for the gyroscopic system. A geometric nonlinearity due to mid-plane stretching is considered and Hamilton's principle is employed to derive the nonlinear equation of motion. The equation is then reduced into a set of nonlinear ordinary differential equations with coupled terms via Galerkin's method. For the system in the sub-critical speed regime, the pseudo-arclength continuation technique is employed to plot the frequency-response curves. The results are presented for the system with and without a three-to-one internal resonance between the first two transverse modes. Also, the global dynamics of the system is investigated using direct time integration of the discretized equations. The mean axial speed and the amplitude of speed variations are varied as the bifurcation parameters and the bifurcation diagrams of Poincare maps are constructed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.773-778
• /
• 2008

The subway noise in curved line is affected not only by rail condition but also wheel condition and dynamic characteristics. The railway curving noise can be divided into 2 categories. The first is noise depending on the vehicle speed, and the second is the one independent on vehicle speed. In this study the noises were reviewed by using eigen-mode of wheel and waterfall plot which shows noise level in time-frequency domain. And also those were reviewed in viewpoint of stick-slip noise and wheel flange contact noise.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.578-597
• /
• 2014

Understanding of 'spatial' pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical 'spatial' pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting 'spatial' pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권7호
• /
• pp.362-370
• /
• 2002

This paper describes the practical tuning method of dual-input PSS and its application to Muju P/P #2 with Proto PSS, which is based on DSP technology and uses both frequency and power. First, the model parameters of generator system used in this paper have been derived from the generator characteristic testing. Then, in the selection of PSS parameters, the Bode plot is plotted in order to tune the PSS's time constants which are able to compensate the phase lagging due to generator and excitation system. In addition, the eigenvalue analysis is also performed for determining a reliable PSS gain, $K_{s}$. Finally, the transient stability program has been utilized to verify the safe operation of Proto PSS against the predictable disturbances such as the AVR-step test and generator unloading test. In on-site test, the simulated results have been identically duplicated by implementing AVR step test in Muju P/P #2 with Proto PSS, which has the previously designed PSS parameters.s.

• 대한디지털의료영상학회논문지
• /
• 제9권1호
• /
• pp.7-15
• /
• 2007

고정식 초점형 격자가 적용된 비정질 실리콘 평판형 검출기에서 초점-격자간 중심변위와 두부 팬텀의 검출기내 위치 변위가 영상 특성에 미치는 영향을 조사하여, 디지털 의료영상 장비의 올바른 사용 방법을 제안하고자 한다. 고정식 초점형 격자를 적용한 비정질 실리콘 평판형 검출기에서 두부 팬텀을 사용하여 초점-격자간 중심 변위와 두부 팬텀의 위치 변위에 따라 영상을 획득 하였다. 획득된 영상을 NIH(Image J) 영상 분석 프로그램을 이용하여 동일 영역에서의 픽셀값(Pixel value), 히스토그램(Histogram), 도면형상(plot profile), 표면도(Surface plot)등을 분석하고, 표준 촬영 영상과 비교 하였다. 초점-격자간 측 방향 중심 변위와 초점-격자와 두부 팬텀의 이중 변위는 수평, 대각선으로 증가할수록 픽셀의 평균값과 표준편차값이 비례적으로 감소하였다. 또한 높은 픽셀값의 빈도수가 상당히 감소하여 영상의 대조도를 저하시켰고, 변위가 증가할수록 영상 왜곡현상도 증가하였다. 다음으로 두부 팬텀 위치 변위의 픽셀 평균값은 큰 변화가 없었으나 수평, 대각선으로 증가할수록 높은 픽셀값의 빈도수가 감소하는 양상을 보여 영상의 대조도가 저하 되었다. 디지털 검출기의 넓은 관용도와 후처리 능력은 영상의 화소 잡음이 증가하여도 방사선사들이 인지하지 못할 수 있다. 따라서 방사선사는 격자가 장착된 디지털 검출기에서 화소 잡음을 증가시키는 촬영 요인들을 정확히 인지하여 검사에 임해야 할 것이다.

• 생물환경조절학회지
• /
• 제21권3호
• /
• pp.186-191
• /
• 2012

참외에서의 관비재배기술 개발을 위하여 배양액의 공급횟수가 토양의 EC 변화, 질소와 칼슘 집적, 덩굴의 생장, 과실의 수량 및 품질에 미치는 영향을 조사하였다. 관비재배는 관행에 비하여 토양 EC가 $0.8dS{\cdot}m^{-1}$까지 증가 하였으나 관행재배는 $0.68dS{\cdot}m^{-1}$에서 $0.2dS{\cdot}m^{-1}$로 낮아졌다. 정식 후 20일 된 식물체의 덩굴길이는 큰 차이가 없었으나 건물중은 관비재배구가 증가하였는데 2회(오전 9시와 오후 6시, 900L/1,000포기, 매일)처리구가 현저히 많았다. 토양 내 질소함량에는 큰 차이가 없었으나 칼슘은 관비재배구가 현저히 높았다. 관비는 관행재배에 비하여 참외과실의 상품(商品)수량이 증가하였는데 1일 1회(오전 9시)보다 2회 관비재배구가 더욱 많았고 기형과율은 관비재배구가 감소하였다. 1개 과실의 크기와 당도에는 차이가 없었다. 저장기간 동안 과실의 중량 감소는 2회 관비재배구가 현저히 많았다.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.203-207
• /
• 2009

Electrochemical methods have been widely used to study the performances and mechanisms for the degradation of organic and inorganic coatings. In this study, EN(Electrochemical noise) measurement was applied to the protective properties and review the parameters analyzed noise signals in the time and in the frequency domain for epoxy resin based coated steels during exposure to hot sea water($40^{\circ}C$) and salt spray for 200 days. It was also found that $R_n$(Noise resistance), $R_{sn}$($f_{min}$)(Spectral noise resistance) and 2H(Hurst exponent) represented the performance of epoxy coated steels. $R_n$ can be determined as the ratio of the standard deviations of potential and current noise signals and is decreased to exposure time. Data qualities can be easily checked by PSD(Power Spectral Density) plot and $V_{psd}$, $I_{psd}$ and $R_{sn}$($f_{min}$) is useful to research the protective performances and mechanisms of coated steels. Hurst exponent represents the degradation of coated steels. But, it is difficult to directly apply the protective criterion to the evaluation of epoxy coated steels used the shipbuilding processes.