• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2009

This study presents an analytical model of an automotive steering hose containing tuner(flexible spiral metal tube) to reduce the ripple pressure induced by steering vane pump. The double-wall side branch composed in a steering hose containing tuner was analogically considered as a filter in a conduit. Specialized test equipment was manufactured for the estimation of speed of sound in a conduit and measurement of amplitude ratio between the propagated ripple pressures of inlet and outlet of the steering hose. Experimental data of entire frequency ranges can be obtained through the test once in short time. The results of three points' measurement method and cross-correlation method to estimate the speeds of sound in a hose, tuner, and side branch respectively reveal that cross-correlation method can be used practically. The results of simulation and experiment were so close, especially in the range of engine idling speed, that the proposed analytical model in this study was validated. Sensitivity analyses and experiments show that longer tuner is preferable, and that the positive-positive composition of the steering hoses containing tuner is superior to others to attenuate ripple pressure.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.221-229
• /
• 2011

Optimization study of the hot water extraction for enhancing antioxidative activity from Auricularia auricula was performed by Taguchi approach using orthogonal matrix $L_9(3^4)$ method. The correlation between DPPH radical scavenging activity and the components of samples extracted from different extraction conditions were also analyzed. The correlation coefficient between DPPH radical scavenging activity and melanin content of A. auricula were 0.93, indicating 'good correlation'. The optimum extraction conditions was obtained at the extraction time of 1 hr. temperature of $85^{\circ}C$, solid: water ratio of 1: 40(w/v) and frequency of 2 times. Under these conditions, values of maximum DPPH free radical scavenging activity and melanin contents of A. auricula were $67.21{\pm}2.17$ and $52.94{\pm}2.10 mg/g$, respectively. Melanin content of 1.6 times and DPPH free radical scavenging effect of 130% were enhanced by optimization.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.4
• /
• pp.191-206
• /
• 2018

Purpose : This study investigated the correlation between speech intelligibility and acoustic measurements of speech sounds produced by the children with speech sound disorders and children without any diagnosed speech sound disorder. Methods : A total of 60 children with and without speech sound disorders were the subjects of this study. Speech samples were obtained by having the subjects? speak meaningful words. Acoustic measurements were analyzed on a spectrogram using the Multi-speech 3700 program. Speech intelligibility was determined according to a listener's perceptual judgment. Results : Children with speech sound disorders had significantly lower speech intelligibility than those without speech sound disorders. The intensity of the vowel /u/, the duration of the vowel /${\omega}$/, and the second formant of the vowel /${\omega}$/ were significantly different between both groups. There was no difference in voice onset time between the groups. There was a correlation between acoustic measurements and speech intelligibility. Conclusion : The results of this study showed that the speech intelligibility of children with speech sound disorders was affected by intensity, word duration, and formant frequency. It is necessary to complement clinical setting results using acoustic measurements in addition to evaluation of speech intelligibility.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.239-247
• /
• 2008

Firmness is very important factor to evaluate the freshness and ripeness among the various factors, in concerning about the melon quality. This study was carried out to develop the technique using impact signal to measure the melon firmness nondestructively. Results of analyzing impulse signals of melons having different firmness levels showed that the firmness of melon affected various impulse responses including amplitude, transmitted time, maximum peak frequency, firmness index 1 ($f^2m$), and firmness index 2 ($f^2m^{2/3}$). Impulse signal amplitude was the best indicator to predict the firmness of melon because of a strong corelation ($R^2\;=\;0.9071$). Firmness index 1, firmness index 2, maximum peak frequency, and normalized transmitted time were also possible indicators with acceptable correlation values.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.583-591
• /
• 2007

In this study, meteorological characteristics concerning the occurrence of fog are analyzed using 4-years (2000-2003) data at Chuncheon. From the analysis of meteorological characteristics, the fog at Chuncheon occurred before sunrise time and disappeared after that time and lasted for 2-4 hours. When fog occurred, on the whole, wind direction was blew the northerly and wind speed was below 2.1 m/s. Especially, about 42 % of foggy day fell on the calm($0{\sim}0.2m/s$) conditions. The difference between air temperature and dew point temperature near the surface were mainly less than $2^{\circ}C$. For the lack of water surface temperature, the water sur-face temperature was calculated by using Water Quality River Reservoir System (WQRRS). In Chuncheon, there is close correlation between the frequency of fog day and outflow from Soyang reservoir and high frequency of occurrence due to the difference between air and cold outlet water temperature.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.22-25
• /
• 2008

The dynamic response of the head arm assembly (HAA) of a hard disk drive to an impact load was obtained from a 3D non-linear finite element model using ANSYS/LS-DYNA and from experiments using a modified levitation mass method (LMM). In the finite element model, the impact load was created by modeling the mass as a rigid body and making it collide with the HAA. The velocity, displacement, acceleration, and inertial force of the mass were then obtained from the time history data of the finite element analysis. In the LMM, a mass that was levitated with an aerostatic linear bearing, and hence encountered negligible friction, was made to collide with the actuator arm, resulting in a dynamic bending test for the arm. During the collision, the Doppler frequency shift of the laser beam reflected from the mass was accurately measured with an optical interferometer. The velocity, displacement, acceleration, and inertial force of the mass were accurately calculated from the measured time-varying Doppler frequency shift. A good correlation between the experimental data and FEA results was observed. The FEA was also used to investigate the dynamic response of the HAA to impact by different masses.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.2
• /
• pp.10-19
• /
• 1990

The tempering behavoirs of 0.45% carbon steel treated by automatic progressive high frequency induction hardening equipment have been investigated. In order to examine the correlation of hardness with both tempering temperature and time, simple regression analysis has been made using the statistical quality control package. The maximum surface hardness value of induction hardened zone and its effective hardening depth have been determined to be Hv 810 and 0.76mm, respectively. The hardness obtained after tempering has been shown to vary lineary with tempering time at six different temperatures. The activation energies during tempering have been calculated to be 25.34kcal/mole, 32.73kcal/mole and 49.24kcal/mole for HRcs 60, 50 and 40, respectively, showing that tempering process occurs by a complex mechanism, The tempering hardness equation of $H=90.113{\sim}4.531{\times}10^{-3}$ [T(11.996+log t)] has proved to be in a reasonably good agreement with experimently determined data and it is also expected to be useful for the determination of tempering treatment conditions to obtain a required hardness value.

• Human Ecology Research
• /
• v.59 no.2
• /
• pp.245-259
• /
• 2021

The purpose of this study was to analyze big data to identify the sub-dimensions of ethical consumption, as well as the consumption value associated with ethical consumption that changes over time. For this study, data were collected from Naver and Daum using the keyword 'ethical consumption' and frequency and matrix data were extracted through Textom, for the period January 1, 2016, to December 31, 2018. In addition, a two-way mode network analysis was conducted using the UCINET 6.0 program and visualized using the NetDraw function. The results of text mining show increasing keyword frequency year-on-year, indicating that interest in ethical consumption has grown. The sub-dimensions derived for 2014 and 2015 are fair trade, ethical consumption, eco-friendly products, and cooperatives and for 2016 are fair trade, ethical consumption, eco-friendly products and animal welfare. The results of deriving consumption value keywords were classified as emotional value, social value, functional value and conditional value. The influence of functional value was found to be growing over time. Through network analysis, the relationship between the sub-dimensions of ethical consumption and consumption values derived each year from 2014 to 2018 showed a significantly strong correlation between eco-friendly product consumption and emotional value, social value, functional value and conditional value.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.503-511
• /
• 2007

Heart rate variability(HRV) is the clinical consequence of various influences of the autonomic nervous system(ANS) on heart beat. HRV can estimate the potential physiologic rhythm from the interval between consecutive beats(RR interval or HRV data), but cardiovascular system governed by ANS is in relation to respiration and autonomic regulation. It is known as RSA representing respiration-related HR rhythmic oscillation. Because the mechanism linking the variability of HR to respiration is complex, it has so far been unknown well. In this paper, we tried to evaluate 5-min RR interval segments under control of respiration in order to find out a proper respiration rate that can estimate the ANS function. 10 healthy volunteers were included to evaluate 5-min HRV data under 4 different respiration-controlled environments; 0.03Hz, 0.1Hz, 0.2Hz, and 0.4Hz respiration. HRV data were analyzed both in the frequency and the time domain, with cross-correlation coefficient(cross-coeff.) for HRV and respiration signal. The results showed maximum cross-coeff. of 0.84 at 0.1 Hz and minimum that of 0.16 at 0.4Hz respiration. Cross-coeff was decreased at a faster rate from 0.1Hz respiration. All mean SDNN, RMSSD, and pNN50 of time domain measures were 108.7ms, 71.85ms, and 28.47%, respectively, and LF, HF, and TP of frequency domain measures were $12,722ms^2,\;658.8ms^2$, and $7,836.64ms^2$ at 0.1Hz respiration, respectively. In conclusion, 0.1Hz respiration was observed to be very meaningful from time domain and frequency domain analysis in relation to respiration and autonomic regulation of the heart.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2011

Accurate response analysis of long span bridges subjected to seismic excitation is important for earthquake hazard mitigation. In this paper, the performance of a typical four span continuous reinforced concrete bridge model subjected to asynchronous multiple seismic excitations at the supports is investigated in both the time and frequency domains and the results are compared with that from a relevant uniform support excitations. In the time domain analysis, a linear modal superposition approach is used to compute the peak response values. In the frequency domain analysis, linear random vibration theory is used to determine the root mean square response values where the cross correlation effects between the modal and the support excitations on the seismic response of the bridge model are included. From the two sets of results, a practical range of peak factors which are defined to be the ratio of peak and the root mean square responses are suggested for displacements and forces in members. With reliable practical values of peak factors, the frequency domain analysis is preferred for the performance based design of bridges because of the computational advantage and the generality of the results as the time domain analysis only yields results for the specific excitation input.