• Korean Journal of Human Ecology
• /
• v.16 no.1
• /
• pp.137-143
• /
• 2007

The purpose of this study is to prove the work efficiency of PDS by measuring the work time on the process of pattern making of woman's tailored jacket. Also compared to the manual work time, PDS work efficiency is estimated according to experience difference. The YUKA CAD system was used. Through analysis of PDS Process, work time was measured by stop watch. Also the appearance of the 2 jackets was evaluated by a pool of evaluators consisted of graduate students and experienced professional modelist. The results were as follows: The work efficiency of PDS is higher than the work efficiency of manual work. There were significant differences of work time between work types in the expert and inexpert group. A study compared the work efficiency by PDS work type with those by manual work type according to experience difference and found that the work efficiency by PDS in the expert group was 25.3%, in the inexpert group was 35%. There were significant differences of work time between experience groups in PDS work, the work efficiency of expert group to inexpert group in the total pattern making time by PDS was 36.7%. There were no significant differences of appearance of tailored jacket between work types.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1891-1901
• /
• 2017

In this paper, optimal control of the fuel cell and design of a high-efficiency power converter is implemented to build a high-priced fuel cell system with minimum capacity. Conventional power converter devices use a non-isolated boost converter for high efficiency while the battery is charged, and reduce its conduction loss by using MOSFETs instead of diodes. However, the efficiency of the boost converter decreases, since overshoot occurs because there is a moment when the body diode of the MOSFET is conducted during the dead time and huge loss occurs when the dead time for the maximum-power-flowing state is used in the low-power-flowing state. The method proposed in this paper is to adjust the dead time of boost and rectifier switches by predicting the power flow to meet the maximum efficiency in every load condition. After analyzing parasite components, the stability and efficiency of the high-efficiency boost converter is improved by predictive compensation of the delay component of each part, and it is proven by simulation and experience. The variation in switching delay times of each switch of the full-bridge converter is compensated by falling time compensation, a control method of PWM, and it is also proven by simulation and experience.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1319-1335
• /
• 2017

This paper proposes an opportunistic reporting-based sensing-reporting-throughput optimization scheme that maximizes the spectral efficiency of secondary users (SUs) in cooperative cognitive radio networks with a soft combining rule. The performance of cooperative spectrum sensing depends on the sensing time, the reporting time of transmitting sensing results, and the fusion scheme. While longer sensing time and reporting time improve the sensing performance, this shortens the allowable data transmission time, which in turn degrades the spectral efficiency of SUs. The proposed scheme adopts an opportunistic reporting scheme to restrain the reporting overhead and it jointly controls the sensing-reporting overhead in order to increase the spectral efficiency of SUs. We show that there is a trade-off between the spectral efficiency of SUs and the overheads of cooperative spectrum sensing. The numerical results demonstrate that the proposed scheme significantly outperforms the conventional sensing-throughput optimization schemes when there are many SUs. Moreover, the numerical results show that the sensing-reporting time should be jointly optimized in order to maximize the spectral efficiency of SUs.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.15-25
• /
• 2019

The influences of corona charging parameters on collection efficiency and surface potential of air filters were investigated. A polypropylene filter medium was electrically charged using a corona charger, and the resulting surface potential and filtration efficiency against neutralized KCl particles were measured. The filter media was charged under different conditions of applied voltage, voltage polarity, charging time, and distance between electrodes. In addition, we considered charging both sides of the filter as well as charging one side of the filter. As a result, electrical force obtained by charged fiber affected filtration efficiency when the apply voltage strength was higher than 7 kV. Negatively charged filter had higher filtration efficiency than positively charged filter while the surface potential of the negatively charged filter was slightly lower than those of positively charged filter. Moreover, the filtration efficiency increased as the charging time of filter fiber increased and the distance between electrodes decreased. The filtration efficiency was more sensitive to changes of charging time than to those of electrode distance, and the efficiency of both sides charged filter was higher than that of single side charged filter.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.357-365
• /
• 2001

The aim of this paper is to perform the experiment and the numerical simulation for investigating the heat transfer in a regenerator system with ceramic honeycomb and to suggest a useful correlation for optimization of the regenerator system. For achieving this, the effects of some parameters were investigated, e. g., switching time, cell size and length of honeycomb on the mean temperature efficiency. The measured temperatures by R-type thermocouples were compared with the predictions by means of the commercial package, STAR-CD. A useful correlation for thermal efficiency was newly proposed as a function of the normalized switching time, defined in terms of switching time, cell size and length of honeycomb. The results showed that the thermal efficiency is above 90% and the normalized heat exchange rate is higher than 80% when the normalized switching time is less than 1000.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.639-645
• /
• 2014

This study was conducted to evaluate the management efficiency of oak mushroom farms in Korea using the Data Envelopment Analysis (DEA), which is one of the non-parametric estimation methods. The data that was analyzed in this study was from the result of 2013 survey entitled "Standard Diagnostic Table for Oak Mushroom Management", which was conducted from March 2012 to October 2012. This survey was based on the inputs and outputs of 20 oak mushroom farms. Specifically, this study analyzed the technical efficiency, pure-technical efficiency and scale efficiency using CCR and BCC model of the DEA methods. Furthermore, this study compares the management efficiency between the full time oak mushroom production farms and part time oak mushroom production farms. Results showed that mean value for the technical efficiency was 0.655 which is considered as inefficient in general. For the pure-technical efficiency and scale efficiency, the mean values were 0.830 and 0.747, respectively which showed that inefficiency in the management was observed in the mushroom farms. Results also showed that there were seven farms with a total efficiency of 1, namely Decision Making Unit(DMU)2, DMU5, DMU6, DMU8, DMU10, DMU15 and DMU20. The management efficiency of DMU7 specifically the inputs for production was analyzed and compared to DMU5 and DMU6 and results showed that the DMU7 had an excessive inoculation and site development cost. Lastly, it was also observed that the full time mushroom production farms were more efficient as compared to the part time mushroom farms because of the lower scale efficiency value or smaller area for mushroom production allotted in the part time farms.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.67-74
• /
• 2007

The objective of this research is to select the most effective technique among task related techniques(motion & time study, job redesign, physical environment improvement) for improving work efficiency in shipbuilding enterprise. This study consists of several principal steps. The first step is to design critical criteria in evaluating work efficiency in ship-building enterprises. The second step is to develop sub-criteria of the critical criteria. The third step is to develop a four level AHP(Analytic Hierarchy Process) structure using the critical criteria, sub-criteria and techniques among task related techniques. The fourth step is to develop the pairwise comparison matrix at each level of AHP structure, which was based on survey data collected at the H heavy industry. And the last step is to select the most effective technique among task related techniques using AHP analysis. The result of AHP analysis has shown clear difference in priority among task related techniques in terms of work efficiency of the shipbuilding enterprise: The reduction of normal time is more important than the reduction of allowance time in improving of the work efficiency. Motion & time study is the most important technique for the reduction of normal time, and physical environment improvement is the most important technique for the reduction of allowance time as well.

• The Journal of Korean Association of Computer Education
• /
• v.14 no.5
• /
• pp.1-8
• /
• 2011

The purpose of this study is to explore vocational high school students' understanding levels and misconceptions regarding the time-efficiency of algorithms. In this study, a questionnaire with nine questions was developed. The questionnaire is base on three misconceptions about the time-efficiency of algorithms that are examined through prior studies. The questionnaire was applied to 51 students who completed a programming course. The result shows that the students didn't sufficiently understand the concept of time-efficiency of algorithms and several common misconceptions appeared repeatedly. Finally, teaching strategies using simulation and assesment framework for algorithm's time-efficiency were presented and some recommendations were suggested for refining the curriculum relating computer programming and algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.413-419
• /
• 2014

Underwater acoustic channel has time-variability. Time varying channel which disturbs the continuous transmission of information data reduces the underwater acoustic communication performance. In this paper, we show the temporal coherence as time-variability of channel and indicate throughput efficiency in accordance with transmission time of information data. Then we analyzed influence of underwater channel time-variability on communication throughput efficiency. We confirmed that the throughput efficiency reduced when the time-variability of the channel increased via lake trial.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.3
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.