• Title/Summary/Keyword: Time-Course Analysis

Search Result 659, Processing Time 0.031 seconds

A Study on the Features of Visual-Information Acquirement Shown at Searching of Spatial Information - With the Experiment of Observing the Space of Hall in Subway Station - (공간정보의 탐색과정에 나타난 시각정보획득특성에 관한 연구 - 지하철 홀 공간의 주시실험을 대상으로 -)

  • Kim, Jong-Ha
    • Korean Institute of Interior Design Journal
    • /
    • v.23 no.2
    • /
    • pp.90-98
    • /
    • 2014
  • This study has analyzed the meaning of observation time in the course of acquiring the information of subjects who observed the space of hall in subway stations to figure out the process of spatial information excluded and the features of intensive searching. The followings are the results from the analysis of searching process with the interpretation of the process for information acquirement through the interpretation of observation area and time. First, based on the general definition of observation time, the reason for analyzing the features of acquiring spatial information according to the subjects' observation time has been established. The feature of decreased analysis data reflected that of observation time in the process of perceiving and recognizing spatial information, which showed that the observation was focused on the enter of the space during the time spent in the process of observing the space and the spent time with considerable exclusion of bottom end (in particular, right bottom end). Second, while the subjects were observing the space of hall in subway stations, they focused on the top of the left center and the signs on the right exit the most, which was followed by the focus on the both side horizontally and the clock on the top. Third, the analysis of consecutive observation frequency enabled the comparison of the changes to the observation concentration by area. The difference of time by area produced the data with which the change to the contents of spatial searching in the process of searching space could be known. Fourth, as the observation frequency in the area of I changed [three times -> six times -> 9 times], the observation time included in the area increased, which showed the process for the change from perception to recognition of information with the concentration of attention through visual information. It makes it possible to understand that more time was spent on the information to be acquired with the exclusion of the unnecessary information around.

Effects of Organophosphorous Insecticides on Mice Cholinesterase Activity (유기린계 살충제가 흰쥐의 Cholinesterase활성에 미치는 영향)

  • 윤수홍;김신희;박병윤
    • Environmental Analysis Health and Toxicology
    • /
    • v.2 no.1_2
    • /
    • pp.17-24
    • /
    • 1987
  • Changes in cholinesterase (ChE) activity, electrophoretic pattern of ChE and histopathologic state on the mice serum, brain and liver by administration of organophos-phorous insecticides were studied. The mice ChE activities on serum, brain and liver decreased by increasing of concentration and time both administration of malathion and DDVP, whereas on serum and brain the activities of the 7 days after administration decreased, and then presented the gradually slight recovery in course of time. The ChE on serum and liver showed many isozyme bands by polyacrylamide gel electrophoresis but several on brain. And isozyme bands disappeared and diffused by administration of organophosphorous insecticides and development of time. The mice liver with administration group of malathion on histopathologic test showed midzonal necrosis between central vein and portal area, and with administration group of DDVP mainly presented portal necrosis on location of potal area.

  • PDF

Vibration Fatigue for the Bogie frame of the Rubber Wheel AGT (고무차륜형 AGT 주행장치의 진동피로해석)

  • 유형선;윤성호;변상윤;편수범
    • Journal of the Korean Society for Railway
    • /
    • v.3 no.3
    • /
    • pp.117-124
    • /
    • 2000
  • The rubber wheel-type AGT has two major kinds of bogie; one is the bogie type and the other steering one. Both are important vehicular structure to support the whole running vehicle and passenger loads. This paper deals with the static analysis for the two types of bogie frame subjected to combined external forces, as well as independent ones specified in UIC 515-4. Furthermore, the dynamic analysis is performed under vibrational loading conditions so as to compare dynamic characteristics, Numerical results by using commercial packages, I-DEAS and NASTRAN show that maximum stresses do not exceed the yield strength level of material used for both bogies. From an overall viewpoint of strength, the bogie type turns out to be superior to the steering type except for the case of a lateral loading. It is also observed that the steering type shows a characteristics of low frequency behavior during a course of searching for structurally weak areas to be stiffened. The vibrational fatigue analysis for each bogie frame depends on the loading time history conditions which is applied. Time History Central Database List in the NASTRAN package. Subsequent1y, the fatigue life of bogie type is longer than the steering type.

  • PDF

Study on Bearing and Frequency Target Motion Analysis for Passive Line Array SONAR Using Accumulative Batch Estimation (누적 일괄추정 기법을 이용한 수동 선배열 소나 방위 주파수 - 표적기동분석 연구)

  • Kim, In-Soo
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.22 no.10
    • /
    • pp.788-796
    • /
    • 2016
  • Bearing and frequency measurements of TMA (Target Motion Analysis) in passive line array SONAR have lower bearing rate and frequency doppler, and are not detected or tracked continuously because of various ocean environments. This is a main reason to effect the TMA performance and it takes a long time to get TMA solutions. We propose the bearing and frequency TMA(BFTMA) using accumulative batch estimation to solve the TMA problem of line array passive SONAR. The accumulative batch estimation structure is based on MLE (Maximum Likelihood Estimation) but used accumulative measurements. The accumulative batch estimation is applied for the BFTMA with nonlinear Kalman filter to estimate the target range, speed and course. Simulation and sea data analysis were carried out to verify the performance and applicability of the proposed techniques.

Comparison of Time Analysis on the Film Based System Versus PACS in the CT Scanning (CT 검사에서 시간분석에 의한 필름시스템과 PACS의 비교 연구)

  • Kweon, Dae-Cheol;Hong, Sung-Man;Park, Peom
    • IE interfaces
    • /
    • v.15 no.4
    • /
    • pp.439-443
    • /
    • 2002
  • In this paper, we study to evaluate the relative time required to perform the CT scanning in the PACS versus a film-based system and helical versus non-helical studies. Time studies were performed in 175 consecutive CT scanning. Images from 85 examinations were electronically transferred to a PACS, and 90 were printed to film. The time required to obtain and electronically transfer the images or print the images to film and make the current and previous studies available to the radiologists for interpretation was recorded. The time required for a radiological technologist to complete a CT test was reduced by 43% with the PACS compared with the film-based system and nonhelical was reduced 10~20% with helical studies. This reduction was due to the elimination of a transfer and printing, such as the printing at window or level settings. The use of PACS can result in the elimination of time tasks for the radiological technologist, resulting in marked reduction in examination time. This reduction can result in decreased cost and increased productivity in PACS operation.

The Suggest for improving the operation process of vocational education and training institutions (a beauty major of the vocational college) (직업교육 훈련기관 운영과정 개선에 대한 제안 (전문대 미용계열 중심으로))

  • Kim, Yun-Jung;Hong, Mi-Sook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.2
    • /
    • pp.368-377
    • /
    • 2019
  • The purpose of this study is to examine the present operation process and to suggest the points of improvement so that vocational education and training institutions can be activated more effectively. The subjects of this study were 250 college students who completed or attended the vocational education and training course in Seoul and Gyeonggi-do, and collected 230 data, excluding inappropriate responses. Data analysis was performed by using the statistical package program SPSS Statistics (Ver. 24: IBM, USA). In this study, frequency analysis was conducted to examine the characteristics of data, and crossover analysis was conducted mainly to investigate the correlation between categorical data. The results of this study are as follows: First, it provides information about vocational education and training course to all general high school students at the beginning of the first year of high school, and then, from the first semester of the second grade, do. Second, it is to open four major courses in beauty education at the same time. This makes it possible to acquire qualifications according to four beauty courses during the training period at the training institute rather than the private education institute where private education expenses are incurred. By training all major courses in skin, hair, make-up, and nail art, you will be given the opportunity to carefully determine the major course that fits your aptitude. Based on the results of this research, we propose a plan to improve the vocational education system for vocational high school students who are majoring in cosmetology.

Study of Pro-environmental Development for Golf Course in Korea (한국 골프장의 친환경적 개발에 관한 연구)

  • 김광두
    • Asian Journal of Turfgrass Science
    • /
    • v.12 no.1
    • /
    • pp.49-78
    • /
    • 1998
  • Nowadays, there are increasing demands of golf courses and it is necessary to make more golf courses than the present. To do this, we need to improve the environmental problems with the regional inhabitants, and it is said that the first thing to be considered in developing any golf course in Korea is to preserve the environment. In this context, the purpose of this study is to set forth several design factors to lessen the negative impacts which are accompanied with the development of golf courses. 1. The present conditions of golf courses in Korea Many new golf courses have come into being, particularly since the late 1980s, and now, in the year of 1997, over one hundred of golf courses are doing their business, yet the number of golf course is still less than required. So far, over a half of them have been made in the vicinity of Seoul on account of various reasons, and this has adversely affected on our natural environment. This unreasonable development of golf courses has caused serious water pollution, landslides and the other problems. Also, the topography of Korea is not good for golf courses. Although the demands of golf courses are increasing, the suitable sites for them are very limited, and therefore it is sometimes unavoidable to make golf courses on steep hills. Consequently, in designing golf courses in Korea, the most important thing is the balance between natural environment and artificial environment. 2.Eco-friendly golf course design factors 1) The concept of eco-friendly golf courses Ecologically sustainable and sound golf courses which are made by eco-friendly approaches 2)Basic conditions of eco-friendly golf courses (1)The most suitable sites (2) Conservation of existing ground as much as possible (3)Proper use of agricultural chemicals which have great impacts on the environment (4) Reasonable use of fertilizers (5) Developing a specialized fertilizer only for grass (6) Adaptation of organic agriculture (7) Improvement of grass sorts (8) Establishing reservoirs for purifying the water from golf courses 3) Eco-friendly golf courses (1) Location-Enough area /Gentle slope/Winding ground/Including lakes or streams /Not crossing wind's main direction Facing south or southeast /Suitable soIl for grass /Good drainage /Low level of underground water (2)Course layout and design -Consideration about existing contours as much as possible -Adaptation of Scotish design trend -Various holes' configuration -Consideration toward surrounding landscapes -Reducing grass areas -Giving buffer zones -Adapting computer methods in the process of site analysis and design (3) Eco-friendly considerations in constructing and managing golf courses -Protection of wildlife -Reuse of existing forests and preservation of topsoil -Renovation of old-fashioned courses -Reducing grass areas -Purification of water -Standization of management -Strict regulations against chemicals -Recycling organic materials -Through separation of the water inside golf courses and out of bounds -Getting proper construction works done in a due time 4.Eco-friendly considerations from a viewpoint of cultural environment 1) Well-matched landscape design and events planning 2) Implement of identifications and awarding systerns 3)Acknowledgement of superintendents' qualitications in the maintenance of golf courses 4)Increasing public golf courses and keeping good relationships with the neighbors near golf courses Key words: Pro-environmental development, Golf course.

  • PDF

A Template-based Interactive University Timetabling Support System (템플릿 기반의 상호대화형 전공강의시간표 작성지원시스템)

  • Chang, Yong-Sik;Jeong, Ye-Won
    • Journal of Intelligence and Information Systems
    • /
    • v.16 no.3
    • /
    • pp.121-145
    • /
    • 2010
  • University timetabling depending on the educational environments of universities is an NP-hard problem that the amount of computation required to find solutions increases exponentially with the problem size. For many years, there have been lots of studies on university timetabling from the necessity of automatic timetable generation for students' convenience and effective lesson, and for the effective allocation of subjects, lecturers, and classrooms. Timetables are classified into a course timetable and an examination timetable. This study focuses on the former. In general, a course timetable for liberal arts is scheduled by the office of academic affairs and a course timetable for major subjects is scheduled by each department of a university. We found several problems from the analysis of current course timetabling in departments. First, it is time-consuming and inefficient for each department to do the routine and repetitive timetabling work manually. Second, many classes are concentrated into several time slots in a timetable. This tendency decreases the effectiveness of students' classes. Third, several major subjects might overlap some required subjects in liberal arts at the same time slots in the timetable. In this case, it is required that students should choose only one from the overlapped subjects. Fourth, many subjects are lectured by same lecturers every year and most of lecturers prefer the same time slots for the subjects compared with last year. This means that it will be helpful if departments reuse the previous timetables. To solve such problems and support the effective course timetabling in each department, this study proposes a university timetabling support system based on two phases. In the first phase, each department generates a timetable template from the most similar timetable case, which is based on case-based reasoning. In the second phase, the department schedules a timetable with the help of interactive user interface under the timetabling criteria, which is based on rule-based approach. This study provides the illustrations of Hanshin University. We classified timetabling criteria into intrinsic and extrinsic criteria. In intrinsic criteria, there are three criteria related to lecturer, class, and classroom which are all hard constraints. In extrinsic criteria, there are four criteria related to 'the numbers of lesson hours' by the lecturer, 'prohibition of lecture allocation to specific day-hours' for committee members, 'the number of subjects in the same day-hour,' and 'the use of common classrooms.' In 'the numbers of lesson hours' by the lecturer, there are three kinds of criteria : 'minimum number of lesson hours per week,' 'maximum number of lesson hours per week,' 'maximum number of lesson hours per day.' Extrinsic criteria are also all hard constraints except for 'minimum number of lesson hours per week' considered as a soft constraint. In addition, we proposed two indices for measuring similarities between subjects of current semester and subjects of the previous timetables, and for evaluating distribution degrees of a scheduled timetable. Similarity is measured by comparison of two attributes-subject name and its lecturer-between current semester and a previous semester. The index of distribution degree, based on information entropy, indicates a distribution of subjects in the timetable. To show this study's viability, we implemented a prototype system and performed experiments with the real data of Hanshin University. Average similarity from the most similar cases of all departments was estimated as 41.72%. It means that a timetable template generated from the most similar case will be helpful. Through sensitivity analysis, the result shows that distribution degree will increase if we set 'the number of subjects in the same day-hour' to more than 90%.

Analysis of Various Acoustic Emission Signal for the Automatic Detection of Defective Manufactures in Press Process (프레스 공정에서의 불량품 자동 검출을 위한 다양한 음향방출 신호의 분석)

  • Kim, Dong-Hun;Park, Se-Myung;Lee, Won-Kyu
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.9 no.4
    • /
    • pp.14-25
    • /
    • 2010
  • Small cracks or chips of a product appear very frequently in the course of continuous production of an automatic press process system. These phenomena became the cause of not only defective product but also damage of a press mold. In order to solve this problem AE(Acoustic emission) system was introduced. AE system was expected to be very effective to real time detection of the defective product and for the prevention of the damage in the press molds In this study, for the pick and analysis of AE signals generated from the press process, AE sensors/pre-amplifier/analysis and processing board were used as frequently found in the other similar cases. For the analysis and processing the AE signals picked in real time from the normal or the detective products, specialized software called AE-win(software for processing AE signal from Physical Acoustics Corporation) was used. As a result of this work it was conformed that intensity and shape of the various AE signals differ depending on the weight of the press and thickness of sheet and process type.

Clinical Analysis of Rhabdomyolysis Complicated with Drug Intoxications (횡문근융해증을 유발하는 음독 약물별 임상경과 분석)

  • Lee Mi Jin;Kim Hyung Min;Kim Young Min;Lee Won Jae;So Byung Hak;Kim Se Kyung
    • Journal of The Korean Society of Clinical Toxicology
    • /
    • v.1 no.1
    • /
    • pp.27-33
    • /
    • 2003
  • Purpose: According as the accessibility about drugs becomes various, the occurrence of drug intoxication is increasing. Since report that doxylamine causes rhabdomyolysis often, drug-induced rhabdomyolysis is one of the most important complications in patients with drug intoxication. Acute renal failure (ARF)'s availability is important to the management in rhabdomyolysis, but report about rhabdomyolysis or ARF occurrence for whole intoxicated drugs is lacking up to now. Methods: This research did to 61 patient who had rhabdomyolysis of drug intoxication. First, object patients were divided into two gruops: doxylamine-ingested (Group I) vs non-doxylamine ingested (Group II). And then we analyzed on the early patient's clinical events and laboratory data. We used ROC curve to recognize'the early clinical factors that could forecast ARF appearance among these patients in addition. Results: Almost rhabdomyolysis was happened by doxylamine in drug intoxication ($55.7\%$). However, as compared to group II, group I showed better clinical course, lesser ARF occurrence and hemodialysis requirement. In group II, time was longer in hospital reaching from intoxication, the ARF occurrence rate was higher ($52.6\%$). Analyzing the ROC curve to useful initial factors, they were creatinine, uric acid and interval time from ingestion to hospital. These cut-off values were 1.44 mg/dL, 6.8 mg/dL and 5 hrs. Sensitivity for ARF estimate was $100\%$, specificity $69-98\%$. Conclusion: Compared to group II, Doxylamine-ingested group showed good clinical course. Creatinine, uric acid, interval time from ingestion to hospital aided in ARF estimate in drug-induced rhabdomyolysis.

  • PDF