• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.513-516
• /
• 1999

I here are many kinds of method to compress data. To very simple methods from very complex methods, a kind is various. In this study, the simplest form of the Tolerance-Comparison method, zero-order method is used. Using this method, despite using low speed CPUs, it is possible to compress real time data. So this method is suitable for ECG holler system. In this study, to complement zero-order method, it is needed to develop prediction technique and to research ways to apply the technique.

• Journal of the Korean Statistical Society
• /
• v.24 no.1
• /
• pp.141-147
• /
• 1995

A diffusion model for a system subject to random shocks is introduced. It is assumed that the state of system is modeled by a Brownian motion with negative drift and an absorbing barrier at the origin. It is also assumed that the shocks coming to the system according to a Poisson process decrease the state of the system by a random amount. It is further assumed that a repairman arrives according to another Poisson process and repairs or replaces the system i the system, when he arrives, is in state zero. A forward differential equation is obtained for the distribution function of X(t), the state of the systme at time t, some boundary conditions are discussed, and several interesting characteristics are derived, such as the first passage time to state zero, F(0,t), the probability of the system being in state zero at time t, and F(0), the limit of F(0,t) as t tends to infinity.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.221-224
• /
• 2001

A new code: LS code was proposed for IMT-2000 CDMA system. The code has special properties during a certain time of interval: 1) perfect autocorrelation 2) perfect crosscorrelation. The perfect autocorrelation means that the autocorrelation has nMaximum for zero time-offset and zero for other times during a certain time. Moreover the perfect crosscorrelation means that the crosscorrelation has zero during a time of interest. In the LAS-DMA system, the LS code is only used in the spreading of data bits in contrast to the conventional CDMA system. Therefore the LS code pair setting and allocation order should be dealt with carefully considering the special properties of LS code. This paper is intended as an investigation of the setting LS code pair and the sequential allocation method. Firstly, the optimum LS code pair set is proposed in order to minimize PAPR. Secondly, the sequential allocation method is studied to either minimize PAPR or expand IFW.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.865-872
• /
• 2002

A systematic way of determining the equilibrium orientation of carbon monoxide (CO) in heme proteins using time-resolved polarized mid-IR spectroscopy is presented. The polarization anisotropy at pump-probe delay time of zero in the limit of zero photolysis and the angular distrbution function of CO are required to obtain the equilibrium orientation of CO. An approach is developed for determining the polarization anisotropy in the zero-photolysis limit from the anisotropy measured under finite photolysis conditions in an optically thick sample where the fraction of molecules photolyzed decreased as the pump pulse passes through and is absorbed by the sample. This approach is verified by measuring the polarization anisotropy of CO of carbonmonoxy myoglobin at various levels of photolysis. This method can be readily applied to other photoselection experiments determining precise angle between transition dipoles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.295-298
• /
• 2011

Almost all of control methods proposed so far have been designed such that the overall system guarantees asymptotic stability. It implies that the output converges to zero but not reaches to zero in a finite time. In many actual cases, however, it is preferable to design the controller such that the output gets to zero in a finite time. In this paper, we proposed a novel elliptical sliding surface. To show the effectiveness of the proposed method, experimental results are given.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.425-435
• /
• 2016

This paper presents a comprehensive theoretical analysis and an accurate calculation method of the dead-time required to achieve zero-voltage-switching (ZVS) in a battery charger with the phase-shifted full-bridge (PSFB) topology. Compared to previous studies, this is the first time that the effects of nonlinear output filter inductance, varied Miller Plateau length, and blocking capacitors have been considered. It has been found that the output filter inductance and the Miller Plateau have a significant influence on the dead-time for ZVS when the load current varies a lot in battery charger applications. In addition, the blocking capacitor, which is widely used to prevent saturation, reduces the circulating current and consequently affects the setting of the dead-time. In consideration of these effects, accurate analytical equations of the dead-time range for ZVS are deduced. Experimental results from a 1.5kW PSFB battery charger prototype shows that, with the proposed analysis, an optimal dead-time can be selected to meet the specific requirements of a system while achieving ZVS over wide load range.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.45-51
• /
• 2005

The distribution of shaft resistance is measured by the static load test with the strain gauge or stress gauge, so that the long-term load distribution must be considered for the pile design. However, the measurement by strain gauge generally assumes the 'zero reading', which is the reading taken at 'zero time' with 'zero' load and the residual stress, which is the negative skin friction(or the negative shaft resistance) caused by the pile construction, is neglected. Therefore, the measured value by strain gauge is different from the true load-distribution because residual stresses were neglected. In this study, the three drilled shafts were constructed, and the strain measurements were carried out just after shaft construction. As a result of this study, it is shown that the true load-distribution of drilled shaft is quite different with known load distribution and the true load-distribution of drilled shaft changed from the negative skin friction to the positive skin according to the load increment.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.1
• /
• pp.33-42
• /
• 2020

In Integration Approach (IA)-based Pedestrian Dead Reckoning (PDR), it is important to detect the exact zero-velocity of the foot with an Inertial Measurement Unit (IMU). By detecting zero-velocity during the stance phase of the foot touching the ground and executing Zero-velocity UPdaTe (ZUPT) at the exact time, stable navigation information can be provided by the PDR. When the pace is fast, however, it is not easy to accurately detect the zero-velocity because of the small stance phase interval and the large signal variance of the corresponding interval. Incorrect zero-velcity detection greatly causes navigation errors of IA-based PDR. In this paper, we propose a method to detect the zero-velocity stably even at high speed by novel buffering of IMU's output data and signal processing of the buffer. And we design a PDR based on this. By analyzing the performance of the proposed Zero-Velocity Detection (ZVD) algorithm and ZVD-based PDR through experiemnts, we confirm that the proposed method can provide accurate navigation information of pedestrians such as firefighters in the indoor space.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2021

This paper describes a novel zero-stress member selecting method for sizing optimization of truss structures. When a sizing optimization method with static constraints is implemented, the member stresses are affected sensitively with changing the variables. However, because some truss members are unaffected by specific loading cases, zero-stress states are experienced by the elements. The zero-stress members could affect the computational cost and time of sizing optimization processes. Feature selection approaches can be then used to eliminate the zero-stress member from the whole variables prior to the process of optimization. Several numerical truss examples are tested using the proposed methods.