• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.600-609
• /
• 2009

The traditional carrier sense multiple access (CSMA) protocol like IEEE 802.11 Distributed Coordination Function (DCF) does not handle the constraints adequately, leading to degraded delay latency and throughput as the network scales are enlarged. We present more efficient method of a medium access for real-time wireless sensor networks. Proposed MAC protocol is like the randomized CSMA protocol, but unlike previous legacy protocols, it does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports, we carefully decide to select a fixed-size contention window with non-uniform probability distribution of transmitting in each slot. We show that the proposed method can offer up to severaansimes latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using widely using network simulation package,caS-2. We finally show that proposed MAC scheme comes close to meet bounds on the best latency being achieved by a decentralized CSMA-based MAC protocol for real-time wireless sensor networks which is sensitive to delay latency.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.30-39
• /
• 2021

Research in the field of health lighting has continued to advance to reproduce the color temperature of natural light which periodically changes. However, most of this research could only reproduce a uniform circadian color temperature of natural light, therefore failing to realize the characteristics of the circadian cycle of color temperature difference by latitude and longitude. To reproduce the color temperature of natural light on which the characteristics of a region are reflected, the collection technology of real-time characteristics of natural light is needed. If the color temperatures which are not within a periodical pattern due to climate changes, etc., are measured, it will be difficult to judge the occurrence (presence) of the anomalies and to reproduce the circadian cycle of the color temperature of natural light. Therefore, this study proposes an algorithm for judging the anomalies in real time based on the sliding window to reproduce the color temperature of natural light. First, the natural light characteristics DB collected through the on-site measurement were analyzed, the differential values at a one-minute interval were calculated and examined, and then representative color temperature circadian patterns by solar terms were drawn. The anomalies were then detected by the application of the sliding window that calculated the deviation of the color temperature for the measured color temperature data set, which was collected through RGB sensors, while moving along the time sequence. In addition, the presence of anomalies was verified through the comparison study between the detection results and the representative circadian cycle of the color temperature by solar term. The judgment method for the anomalies from the measured color temperature of natural light was proposed for the first time, confirming that the proposed method was capable of detecting the anomalies with an average accuracy of 94.6%.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.23-32
• /
• 2006

Window buttons located on a task bar provide information about windows that have been open as well as active. When the number of buttons on the task bar increases, the button size gets smaller and as a result, it is more difficult to identify. This study proposes new alternatives of presenting window buttons to search for a target button efficiently. An experiment was conducted to evaluate the usability of the new. Factors manipulated in the experiment include 'button arrangement methods' and 'order of buttons'. The 'button arrangement methods' factor is composed of three levels, 'one line', 'changeable line', and 'grouping buttons'. The 'order of buttons' factor is composed of three levels, 'fixed order', 'click-right', and 'order control by user'. The results showed that the main effects were significant in search time. In subjective satisfaction, the interaction effect was also significant. The results could be applied to the design of small screens such as PDA or cellular phones.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.138-139
• /
• 2018

The purpose of this study is to analyze the work of the existing manpower dependent cleaning method by investigating the window cleaning site. In this study, detailed work contents were confirmed by on-site investigation and interview with experts, and the relationship, procedure, repetition work, and time required for each work were analyzed. The future analysis results will be used as a basic data for comparative analysis of productivity and economical efficiency with the window cleaning device to be developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.593-603
• /
• 1997

Connection admission decision in ATM networks requires decision made in real time using fast algorithm. It is difficult to construct a model of the multiplexed traffic and thus, approximation of the traffic load is necessary. In this paper, we propose a measurement-based dynamic CAC(Connection admission Control) in ATM(Asynchronous Transfer Mode) networks, which observes current traffic by the moving window and set the window size to the value which is computed from the measured cell loss amount. It is based on the measurements of the traffic load over an admission period that is load enough to reflect the current traffic behavior instead of analytic modeling. And, the dynamic reallocation of bandwidth for each class leads to effective bandwidth utilization. The performance of proposed method is analyzed through computer simulation. The performance of proposed method is analyzed by using SIMAN simulation package and FORTRAN language. As can be seen in the simulation result, cell loss performance and bandwidth utilization have been increased.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.8-13
• /
• 2013

In case of fire in a high-rise building fire can be easily spread along the building external walls dramatically if the flame comes out through broken windows. There are a few effective methods to prevent the fire spread at the moment. One is using a fire resistance window, and the other is using a window sprinkler that discharges water to resist flame in case of fire. In this study a window sprinkler which is installed on top of windows and prevents fire by discharging water when its heat-responsive element opens was tested using a large scale furnace in accordance with the standard temperature-time graph. Test result showed that one window sprinkler was able to protect a 2,400 mm wide window from fire for 2 hours and the window backside's temperature locally increased up to $126^{\circ}C$ but kept stable around $100^{\circ}C$ for the test duration.

• IE interfaces
• /
• v.4 no.1
• /
• pp.63-69
• /
• 1991

In this paper, the Go-Back-N ARQ protocol with decoding in communication network is considered. The time delay and throughput are respectively analyzed as a function of window size and decoding time out. Packets arrive continuously at the decoder, and are stored in a buffer if the decoder is busy upon its arrival. The decoder devotes no more than a time-out period of predetermined length to the decoding of any single packet. If packet decoding is completed within that period, the packet leaves the system. Otherwise, it is retransimitted and its decoding starts anew. The time delay and throughput are obtained using recursive formula and difference equation. An appropriate time out and window size that satisfies the grade of service can be determined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2401-2408
• /
• 1997

The measured pulse shapes provided in the given data package demonstrated pulse distortions due to laser speckle. the distorted pulse shapes were carefully analyzed, modeled, and then applied to the DTTL(Digital-data Transition Tracking Loop)[1] bit synchronizer simulator to measure the mean time delay and its delay variation performance. The result showed that the maximum mean time delay variation with the modeled data was 12.5% when window size equals 1. All the data given were located within this modeled boundary and the maximum eman time delay variation was 7% in this case. The mean time delay variation was known to be smaller by reducing the window size [2][5][6]. The mitigated delay variation was 2.5% in the modeled case and 1.4% in the data set given when the windown size equals 0.1. With the digital DTTL insteal of analog DTTL, similar results was obtained.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.185-186
• /
• 1998

The discrete Wigner-distribution(DWD) was implemented for the time-frequency analysis of heart rate variability signals. The smoothed cross-DWD was used to estimate time-varying power spectrum. Spurious cross-terms were suppressed using a smoothing data window and a Gauss frequency window. The DWD is very easy to implement using the FFT algorithm. Experiment show that the DWD follows well the instantaneous changes of spectral content of heart rate variability signals, which characterize the dynamics of autonomic nervous system response.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.365-374
• /
• 1998

Control Chart is a powerful tool to detect that process is in control or out of control. CIM can have real effect when CIM involve automated quality control. A neural network approach is used for unnatural pattern detecting of control chart. The previous moving window method uses all unnatural pattern that is detected as moving time window. Therefore, It trains a large number of unnatural pattern and takes training time long. In this paper, the proposed method tests a small number of training unnatural pattern which modifies test data without repeating time. We shows that the proposed method has differences In training time and identification rate on the previous moving windows method. As results, we reduced training time and obtain the same identification rate.