• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.322-330
• /
• 2007

Recent advances in wireless networks and low-cost, low-power design have led to active research in large-scale networks of small, wireless, low power sensors and actuators, In large-scale networks, lots of timing-synchronization protocols already exist (such as NTP, GPS), In ad-hoc networks, especially wireless sensor networks, it is hard to synchronize all nodes in networks because it has no infrastructure. In addition, sensor nodes have low-power CPU (it cannot perform the complex computation), low batteries, and even they have to have active and inactive section by periods. Therefore, new approach to time synchronization is needed for wireless sensor networks, In this paper, I propose Energy-Efficient Time Synchronization (EETS) protocol providing network-wide time synchronization in wireless sensor networks, The algorithm is organized two phase, In first phase, I make a hierarchical tree with sensor nodes by broadcasting "Level Discovery" packet. In second phase, I synchronize them by exchanging time stamp packets, And I also consider send time, access time and propagation time. I have shown the performance of EETS comparing Timing-sync Protocol for Sensor Networks (TPSN) and Reference Broadcast Synchronization (RBS) about energy efficiency and time synchronization accuracy using NESLsim.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.95-105
• /
• 2021

In the case of laptops and tablet PC's that replace desktop, it uses the Windows operating system to provide various functions depending on operating system dependency, the Windows operating system does not support real-time processing because it uses multi-level feedback queue scheduling that extends round-robin scheduling. Also, since the initial value of Local APIC Counter can not be obtained from the Windows 8, the real-time processing function provided through the existing RTiK does not work. In this paper, we calculate Local APIC Counter value by using MSR_FSB_FREQ register to support real-time processing function on tablet PC's. We designed and implemented RTiK+, which provides real-time processing function to guarantee the periodicity by calculating the operation time of accurate timer. In order to verify and evaluate the performance of the implemented the RTiK+, the period was measured by using the Read Time-Stamp Counter(RDTSC) instruction and it was confirmed that it operates normally at 1ms and 0.1ms period.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.243-258
• /
• 2011

With increasing interest in ubiquitous computing technology, an infrastructure for the short-distance wireless communication has been extended socially, bringing spotlight to the security system using the image or location. In case of existing security system, there have been issues such as the occurrences of blind spots, difficulty in recognizing multiple objects and storing of the unspecified objects. In order to solve this issue, zone-based location-estimation search system for the image have been suggested as an alternative based on the real-time location determination technology combined with image. This paper intends to suggest the search service for the image zone-based location-estimation. For this, it proposed the location determination algorism using IEEE 802.15.4/ZigBee's RSSI and for real-time image service, the RTP/RTCP protocol was applied. In order to combine the location and image, at the event of the entry of the specified target, the record of the time for image and the time of occurrence of the event on a global time standard, it has devised a time stamp, applying XML based meta data formation method based on the media's feature data based in connection with the location based data for the events of the object. Using the proposed meta data, the service mode which can search for the image from the point in time when the entry of the specified target was proposed.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.490-491
• /
• 2013

본 논문에서는 WBAN을 위한 무선 USB 프로토콜의 에너지 효율적인 시간동기 알고리즘에 대한 연구이다. 에너지 효율적인 즉, 전력 소모를 최소화하기 위한 정밀한 시간동기 알고리즘을 제안한다. 본 논문에서 제안하는 시간 동기 알고리즘은 WBAN에서 무선 USB의 센서노드의 Time Stamp 패킷을 송수신하는 방식으로 전력소모를 최소화한다.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2008

IPTV Content delivery systems over wired networks confront scalability problems due to their high network bandwidth requirement for real-time services. Especially, VoD service provides Trick Mode features such as pause, fast forward and similar operations. However, Trick Mode services are delivered by the method of unicast only for controlling of the stream. With a point of views, this paper propose a new real-time multimedia streaming architecture over IP Networks, which tries to achieve bandwidth efficiency and supporting for mass clients better than traditional unicast services. The proposed methods divide the Transport Stream into a series of segments. After that, this divided partial Transport Stream makes multicast streaming periodically. Meanwhile Set-top Box of a client makes a rearrangement orderly by using Presentation Time Stamp field from the served Transport Stream packets. While the current Transport Stream segment is playing, it should be guaranteed that the next segment is downloaded on time. Consequently, the original video content can be played out continuously. The detail introduction of a new real-time multimedia streaming system with analysis and simulation follows as below.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.225-230
• /
• 2006

Nanoimprint lithography (NIL) is a novel method of fabricating nanometer scale patterns. It is a simple process with low cost, high throughput and resolution. NIL creates patterns by mechanical deformation of an imprint resist and physical contact process. The imprint resist is typically a monomer or polymer formulation that is cured by heat or UV light during the imprinting process. Stiction between the resist and the stamp is resulted from this physical contact process. Stiction issue is more important in the stamps including narrow pattern size and wide area. Therefore, the antistiction layer coating is very effective to prevent this problem and ensure successful NIL. In this paper, an antistiction layer was deposited and characterized by PECVD (plasma enhanced chemical vapor deposition) method for metal stamps. Deposition rates of an antistiction layer on Si and Ni substrates were in proportion to deposited time and 3.4 nm/min and 2.5 nm/min, respectively. A 50 nm thick antistiction layer showed 90% relative transmittance at 365 nm wavelength. Contact angle result showed good hydrophobicity over 105 degree. $CF_2$ and $CF_3$ peaks were founded in ATR-FTIR analysis. The thicknesses and the contact angle of a 50 nm thick antistiction film were slightly changed during chemical resistance test using acetone and sulfuric acid. To evaluate the deposited antistiction layer, a 50 nm thick film was coated on a stainless steel stamp made by wet etching process. A PMMA substrate was successfully imprinting without pattern degradations by the stainless steel stamp with an antistiction layer. The test result shows that antistiction layer coating is very effective for NIL.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.485-498
• /
• 2017

Objective: This study aims to survey and compare three systemic accident investigation techniques of Accimap, STAMP and FRAM, based on the application studies of the Sewol ferry accident. Background: Traditional accident investigation methods such as domino models, FTA, etc. work well for losses caused by physical component failures or actions of human in relatively simple systems, but are unable to depict mechanisms generating errors and violations in the current complex socio-technical systems. For better understanding the structure and behavior of the socio-technical systems, systemic techniques have been developed and used. Method: This study was mainly based on survey of literatures through surfing webpages of ScienceDirect and Google, and ergonomics relevant journals. The key words of Sewol, Sewol ferry, Sewol ferry accident, etc. were used in the survey. Results: Three systemic accident investigation methods included similar actors in the Sewol ferry accident including government, Ministry of Ocean and Fisheries, Korean Coast Guard, Korean Register of Shipping, Korea Shipping Association, Chonghaejin Marine Company, crew members. The methods graphically represented each level's failures or performance variabilities of relevant functions and relationships between them. It was shown that the systemic methods consider the entire system, ranging from the environment in which the accident occurred, to the role of government in shaping the system of work. Each method has its own comparative pros and cons, but the Accimap has advantages in terms of time of analysis, data required, model complexity and degree of comprehensiveness. Conclusion: This study reviewed and compared three systemic accident investigation methods, which showed that there are systemic characteristics and pros and cons in the methods. Application: The results would be used as a guideline when selecting accident investigation methods.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.442-450
• /
• 2015

This paper proposes a method for reducing false conflicts in signature-based eager hardware transactional memory (HTM). The method tracks the information on all cache blocks that are accessed by a transaction. If the information provides evidence that there are no conflicts for a given transactional request from another core, the method prevents the occurrence of a false conflict by forcing the HTM to ignore the decision based on the signature. The method is very effective in reducing false conflicts and the associated unnecessary transaction stalls and aborts, and can be used to improve the performance of the multicore processor that implements the signature-based eager HTM. When running the STAMP benchmark on a 16-core processor that implements the LogTM-SE, the increased speed (decrease in execution time) achieved with the use of the method is 20.6% on average.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.201-209
• /
• 2012

The point-based complex event processing handled an instantaneous event by using one time stamp in each event. However, the activity period of the event plays the important role in the field which is the same as the finance, multimedia, medicine, and meteorology. The point-based event is insufficient for expressing the complex temporal relationship in this field. In the application field of the real-time world, the event has the period. The events more than two kinds can be temporally overlapped. In addition, one event can include the other event. The relation about the events of kind of these can not be successive like the point-based event. This thesis designs and implements the method detecting the patterns of the complex event by using the interval-based events. The interval-based events can express the overlapping relation between events. Furthermore, it can include the others. By using the end point of beginning and end point of the termination, the operator of interval-based events shows the interval-based events. It expresses the sequence of the interval-based events and can detect the complex event patterns. This thesis proposes the algorithm using the active instance stack in order to raise efficiency of detection of the complex event patterns. When comprising the event sequence, this thesis applies the window push down technique in order to reduce the number of intermediate results. It raises the utility factor of the running time and memory.