• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.69-74
• /
• 2000

The bandwidth of microstrip slot antenna with T-shaped feed line was a wider than one of the conventional feeding structure. When the slot antenna with bi-directional radiator wants to radiate only one direction, the reflector must be set up seperately. But this antenna doesn't need set up reflector. And then we proposed to a new method of a directional slot radiator with a cross-shaped feedline including the reflector using 2-layers dielectric materials. It is calculated waves and electric field distribution in the time domain by using FDTD method. We also are calculated return loss, VSWR, input impedance, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes as length($\I_s$) and width($\W_s$) of slot, length of the horizontal feedline($\I_d$), length of the vertical feedline($\I_u$) and offset sensitively. After optimizing the parameters of design, the maximum bandwidth was measured as 1,850MHz at the center frequency 2.5 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.223-233
• /
• 2014

As a broadcast message authentication method in wireless sensor networks, ${\mu}$TESLA enables sensor nodes efficiently authenticate message from base station (BS). However, if we use ${\mu}$TESLA that has very short length of key slot in unattended wireless sensor network (UWSN), sensors may calculate a huge amount of hashs at once in order to verify the revealed secret key. In contrast, if we set the length of ${\mu}$TESLA's key slot too long in order to reduce the amount of hashs to calculate, BS should wait out the long slot time to release key. In this paper, we suggest variable key slot ${\mu}$TESLA in order to mitigate the problem. As showing experiment results, we prove that our suggestion improve sensor node's response time and decrease of number of hash function calculation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.278-285
• /
• 1991

The authors propose to use the slot system in order to improve of the efficiency for the cambered otter boards. The experiment is divided into 2 parts, one is the efficiency model test, and the other is the visualization model test. The hydrodynamic characteristics of the model otter boards were tested by efficiency model test to measure the shearing, drag force of the models and visualization test using hydrogen bubble method to observe the streak-line and time-line of flow around the models, and milk spout method to observe the separation zone in the wake behind the models. This study tested for 5 models such ad without slot, slot position 0.2C, 0.4C, 0.6C and 0.8C. The results obtained are as follows: \circled1 The maximum C sub(L) of model otter board with slot position 0.6C in attack angle 27$^{\circ}$ was the highest of all models, it's value was 1.59. \circled2 In general, the L/D ratio of the one slot otter boards were 16~28% higher than otter board without slot. \circled3 The slot position 0.6C was better than any other slot position, and it's conformed by visiualization. \circled4 As to the model otter board with slot position 0.6C, flow speed of the back side was faster 1.3 to 1.7 times than in the front side. \circled5 The size of the separated zone in case of the model otter board with 0.6C was smaller than that of any other models.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.55-63
• /
• 2006

In this paper, an algorithm that provisions absolute differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that compensates the deviation for prediction on the traffic to be arrived continuously. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot, and derives the deviation between the two quantity. The deviation is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the constant rate traffic. It is demonstrated through simulation that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional mechanism.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1435-1440
• /
• 2014

Nodes in WSNs must operate under limited energy resource. Controlling access to the channel in WSNs plays a key role in determining channel utilization and energy consumption. This paper introduces a priority-based time slot allocation protocol for hybrid TDMA/CSMA MAC in WSNs. This protocol combines both TDMA and CSMA techniques while introducing prioritization by (m,k)-firm constraint. The performance of this protocol is obtained through simulations for various number of nodes and show significant improvements in delay and packet delivery ratio compared to S-MAC.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.215-222
• /
• 2014

This paper presents an experimental study of a vibration-assisted dry micro-wire electrical discharge machining (${\mu}$-WEDM) utilized in high precision and micro-manufacturing area. The assisted vibration was applied to the workpiece using a piezoelectric actuator, and high pressure air was injected directly into the machining gap through a nozzle. Investigation experiments were performed to estimate the importance of input parameters and it was observed from experiment results that the width (kerf) of the cutting slot and the machining time were significantly affected by the air injection pressure and input energy. Moreover, it was also observed that there exists an optimal relationship between the machining time and input parameters including the air pressure and vibration frequency and amplitude. Central composite design based experiments were also carried out, and empirical models of the machining time and cutting slot kerf have been developed using the response surface methodology to analyze and optimize the process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1674-1683
• /
• 2003

The performance of a packet data multiplexer with stop­and­wait ARQ protocols under Markovian interruption is considered in this work It is assumed that the input process, into the system is Poisson process, and that the output channel is divided into a series of time slots and a data packet can be transmitted in a slot time. In this system the round­trip propagation delay is defined to be the frame time. It is modeled that the output channel can be blocked by some Markevian interruption, whose state change between the blocking and non­-blocking states is given by Markov process. The overall system has been analyzed by constructing a relationship, taking the Markovian interruption into account, about the buffer behavior between the successive frames of slots. The validity of this analytical results has been verified by computer simulation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.45-49
• /
• 2012

VDL(VHF Data Link) Mode E uses TDMA(Time Division Multiple Access) based aeronautical communication technologies for airborne environments. In the VDL Mode E, aircraft uses RR(Reservation Requests) slot to request data slot. However, RR needs a long guard time, since aircraft communication spans a considerable distance. The more number of aircrafts causes a larger amount of guard times which can make a throughput decreased. In this paper, we propose an enhanced MAC to reduce the guard time by using the distance information of aircraft. The ground station sends management data including time stamp. And then all aircraft can measure their distance from the ground station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2292-2302
• /
• 1997

In this paper, we propose a wireless MAC protocol named APRMA, which is capable of supporting the ABR type data service and maximizing channel utilization. In PRMA protocol, data terminals with random data packets cannot reserve slot. That is, slot reservation is applicable to the time constraint voice packet exclusively. But the reservation scheme has to be performed for loss sensitive data packet, and so data packets can get their quality of service. Therefore, in wireless MAC, reservation technique has to be used for both voice and data services. But in service aspects, if a fixed bandwidth is allocated to data terminals, time constraint voice packets may have a low efficiency. So in this study, the terminal which wants to request for ABR tyupe service, acquires a minimum bandwidth from system for thefirst time. If the system has extra available bandwidth, ABR terminals would acquire additional bandwidth slot by slot. As a result, APRMA protocol cansupporty the data service with loss sensitivity and maintain their channel utilization high. Also high priority services like voice can be satisfied with their QoS by APRMA.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.463-470
• /
• 2000

In this paper, we describe a wireless MAC protocol named APRMA(Abitrary Period Reservation Multiple Access), which is capable of supporting the ABR type data service and maximizing channel utilization. In original PRMA protocol, data terminals with random data packets cannot reserve slot. That is, slot reservation is applicable to the. time constraint voice packet exclusively. But the reservation scheme have to be performed for loss sensitive data packet, so data packets can get their quality of service. The aspects of service, if fixed bandwidth is allocated to data terminals, time constraint voice packets may have a low efficiency So in this study, the terminal which wants to request for ABR type service, acquires a minimum bandwidth from system for the first time. If the system have extra available bandwidth, ABR terminals would acquire additional bandwidth slot by slot. As a result, APRMA protocol can support the data service with loss sensitivity and maintain their channel utilization highly. Also high Priority services like voice can be satisfied with their QoS by APRMA.