• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.277-286
• /
• 2015

Diagnostic radiation devices that is used in the country has reached to 78,000 units. When used for human subjects diagnostic purposes, it is subject to Medical Service Act, when used in diagnostic purposes in animal subjects, the subject to Veterinarians Act. When used for other purposes are subject to the Nuclear Safety Act. Even the same radiation devices varies the legislation that is applied depending on the intended use and object. Diversified been p rovisions a re necessary compared to t he analysis o f l egal content in o rder t o prevent confusion of the legislation is a matter to be applied. It is a qualitative study that Nuclear Safety Act, Medical Service Act and Veterinarians Act administrative procedures for the introduction of the applied diagnostic radiation devices, safety inspection, human resources management, area management and the content related to administrative punishment. The Nuclear Safety Act sub-provisions, the introduction of diagnostic radiation generating devices, there are many complex and complete requirements administrative procedures on the concept of a permit. Inspection of safety associated with the use, would be subject to periodic inspection auditing characteristics over the entire field of radiation safety management. It must receive court regular education for the safety administrator and workers. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Quantitative difference of administrative punishment that is imposed when legislation violation has reached up to 10 times, over the entire field, the largest burden of radiation safety management at the time of application of the Nuclear Safety Act sub provisions. And it is applied differently depending on the purpose and the imaging target using the same diagnostic radiation devices. Depending on the use mainly under the current legal system, radiation can be lacking in fairness of the contents of the legislation for safety management, there is a risk of confusion. Alternatives such as centralized and standardization of legislation by diagnostic radiation devices use is expected to be necessary.

• Journal of Elementary Mathematics Education in Korea
• /
• v.11 no.2
• /
• pp.177-197
• /
• 2007

This study discussed the climbing learning method which studied and practiced by Professor Saito Noboru. This is the learning method which is devised to know not only the relationship of the learning factors but the systemic or structural connection of whole studying contents- affects children's math learning ability through practical class to both the lower and the higher grades. To achieve the purpose of this study, these following issues were set; A. Develop the teaching and learning course of mathematics by applying the climbing learning method. B. Execute the mathematics lesson according to the climbing learning method and analyze the learning achievement. C. Analyze the difference between application of the climbing learning method and that of the learning method by student's level in mathematics. D. Analyze what the climbing learning method gives a shift of the recognition of learning mathematics. In order to accomplish these study issues, we analyzed the text book of math not only for children but also for teachers and developed the teaching and learning course applied the climbing learning method with advice of experts. It was chosen two different homogeneous groups each, third year for lower grade group and fifth year for higher grade group. It was done the experimental group lesson applying the climbing learning method and general lesson for the control group. After then, t-test against independent samples was done depending on the result of the student's assessment(T1, T2). These two groups' students were divided into smaller groups based on result of achievement level regardless of gender. These subgroups were confirmed the difference of learning ability between upper and lower level group. As regarding the result making out grades of faith and attitude for math, t-test was used on independent sample. At the same time, experimental groups were tested using learning attitude with the learning structure chart. Through this study the following results are obtained and the conclusion was drawn. Firstly, although applying the climbing learning method to the lesson does not have significant effect to the lower grade of elementary school student's achievement it has significant influence on the higher grade student's achievement. Second, as a result of analyzing the difference between the climbing learning method and the learning method by student's level in mathematics, it is of no beneficial effect to the lower grade both upper level and lower level. However, it has appreciable effect to the higher grade classes both upper level and low level. Especially, upper level students have higher effect than low level students. Third, climbing learning method does not affect to the faith and attitude of the lower grade students positively, but it has affirmative effect to the higher grade students'. As a result of the survey of the experimental groups which were applied to the climbing loaming method, the lesson by using the learning structure chart proved to be helpful to the both the lower and higher grade. The best advantage of using the learning structure chart, children say, is easily understood whole contents of studying and is useful for review. Furthermore, using the learning structure chart is more efficient compared with previous learning method and is given the successful result to self-directed learning. In conclusion, keeping up with the current of the thought of education, we suggest a scheme as a new teaching method from the constructive learning method which emphasize the self-directed learning.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.21-29
• /
• 1999

This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.148-162
• /
• 1993

There is much speculation that modern capi-talist society is undergoing fundamental and qualitative chnge towards flexible specialization. The purpose of this study is to examine this hypothesis. This paper focusses on: the idea of flexible specialization; the significance of this transition; industrial district; and the implicati-ons of this new production system for Korean industrial space. Main arguments of this study are as follows: First, as all different groups of researchers apply the idea of flexible specialization according to their own specifications, the current debate on this topic is not much fruitful. Not surpri-singly, the concept of flexible specialization has overlapped with subocontracting. This intergration of subcontracting into flexible specialization systems, however, is inappropriate because the two concepts have different historical contexts. The other cause of this controversy is its inherent weekness, conceptual ambiguity. Thus, today's flexibility becomes tomorrow's rigidity. Secondly, transition towards flexible speciali-zation has only been partially achieved even in advanced capitalist countries. The application of dualistic explanatory framework, such as rigidity versus flexibiity, mass production versus small-lot multi-product production, and de-skilling versus re-skilling, has resulted in great exaggeration of the transformation, from Fordism to post-Fordism. There is no intermediary part between two places. Considering that the workers allocated to the Fordist mass production assembly line are not as large as one might imagine, the shift from mass to flexible production has only limited implications for the transformation of capitalist economy. Thirdly, 'industrial district' contorversy has contributed to highlighting the importance of small firms and areas as production space. The agglomeration of small firms in specific areas is common in Korea, but it is quite different from the industrial district based on flexible specialization. The Korean phenomenon stems from close interactions with its major parent firm rather than interactions between flexible, specialized, autonomous and technology-intensive smll firms. Most Korean subcontractors are still low-skilled, labour-intensive, and heavily dependent on their mojor parent firms. Thus, the assertion that the Seoul Metropolitan Area adopts flexible specialization has no base. Fourthly, the main concern of flexible speciali zation is small firms. However, the corporate organization that needs product diversification and technological specialization is oligopolistic large corporations typified by multinational corporations. It is because of this that most of these organizations are adoptiong Fordist mass production methods. The problem of product diversification will be resolved naturally if economic internationalization progresses further. What is more important for business success is the quality and price competitiveness of firms rather than product diversification. Lastly, in order to dispel further misunderst-anding on this issue, it is imparative that the conceptual ambiguity is resolved most urgently. This study recommends adoption of more speci-fied and direct terminology (such as, factory automation, computer design, out-sourcing, the exploitation of part-time labor, job redesign) rather than that of ideological ones (such as, Taylorism, Fordism, neo-Taylorism, neo-Fordism, post-fordism, flexible specialization, peripheral post-Fordism). As the debates on this topic just started, we still have long way to go until consensus is reached.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.4
• /
• pp.97-105
• /
• 2011

A wide diversity of liquid fertilizers and composts produced from the livestock manure in Korea is commonly applied to agricultural lands as an alternative of chemical fertilizers. However, their effects on the crop production and environmental impacts are still vague. The current study was investigated the property changes of paddy soils in sandy loam and silty loam treated with 1) control (no treatment), 2) chemicals, 3) storage liquid fertilizer and 4) SCB liquid fertilizer located in Gyeong-gi province, Korea. The chemical properties of soils in sandy loam and silty loam before the treatment were similar with the ones in the average paddy fields in Korea. Contrary to this, the amount of available phosphorus in sandy loam was higher than the one in the average paddy fields. The number of living organisms in sandy loam and silty loam treated with storage liquid fertilizer and SCB liquid fertilizer were higher than the ones in sandy loam and silty loam with no-treatment and chemicals. Significant difference (P<0.05) among the treatments and no-treatment was observed in sandy loam rather than in silty loam. The amounts of heavy metals were the highest in both sandy loam and silty loam treated with storage liquid fertilizer and SCB liquid fertilizer. The comparison of heavy metals showed that the ones in silty loam were little bit higher than sandy loam. The leaf lengths and dry weights of rices were increased over time, however, no significant difference was observed among each treament. In addition, the rice yield in sandy loam treated with SCB liquid fertilizer was higher than the ones in sandy loam. The highest rice yield was obtained from sandy loam treated with chemicals, but there was no significant difference between storage liquid fertilizer and SCB liquid fertilizer. While the rate of nutrient absorption by rices was the highest in sandy loam and silty loam treated with chemicals, there was no significant difference in sandy loam and silty loam treated with livestock liquid manure.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.157-171
• /
• 2008

The year of 2007 Reformed Curriculum encourages various activity materials in the textbook facilitate students oriented self-help learning. The purpose of this paper is to find out how much the activity materials in housing area of middle school Technology and Home Economics are practiced in the class and why they are used or not used. The data were collected from 253 middle school teachers who had ever taught the housing unit in any of 6 textbooks. The analyses indicated that the most frequent teaching methode was lecture based on the textbook and internet data focused on the figures and contents of the individual textbook. The average rate of practicing the activity materials was differ by textbooks and the characteristics of the materials such as type of materials, feature of non sentence materials, and type of activity. The main two reasons to practice the activity materials were it's adequacy to class goals and application to everyday life. Low interests of students and shortage of time were the two main reasons why not used the materials. Textbook writers should consider these reasons as well as the characteristics of activity materials practiced in the class by the teachers in order to meet the goals of the reformed as well as current curricula.

• The Korean Journal of Archival Studies
• /
• no.16
• /
• pp.97-146
• /
• 2007

Those days when people used paper to make up and manage all kinds of documents in the process of their jobs are gone now. Today electronic types of documents have replaced paper. Unlike paper documents, electronic ones contribute to the maximum job efficiency with their convenience in production and storage. But they too have some disadvantages; it's difficult to distinguish originals and copies like paper documents; it's not easy to examine if there is a change or damage to the documents; they are also prone to alteration and damage by the external influences in the electronic environment; and electronic documents require enormous amounts of workforce and costs for immediate measures to be taken according to the changes to the S/W and H/W environment. Despite all those weaknesses, however, electronic documents increasingly account for more percentage in the current job environment thanks to their job convenience and efficiency of production costs. Both the government and private sector have made efforts to come up with plans to maximize their advantages and minimize their risks at the same time. One of the methods is the Authorized Retention Center which is described in the study. There are a couple of prerequisites for its smooth operation; they should guarantee the legal validity of electronic documents in the administrative aspects and first secure the reliability and authenticity of electronic documents in the technological aspects. Responding to those needs, the Ministry of Commerce, Industry and Energy and the Korea Institute for Electronic Commerce, which were the two main bodies to drive the Authorized Retention Center project, revised the Electronic Commerce Act and supplemented the provisions to guarantee the legal validity of electronic documents in 2005 and conducted researches on the ways to preserve electronic documents for a long term and secure their reliability, which had been demanded by the users of the center, in 2006. In an attempt to fulfill those goals of the Authorized Retention Center, this study researched technical standard for electronic record information package of the center and applied the ISO 14721 information package model that's the standard for the long-term preservation of digital data. It also suggested a process to produce and manage information package so that there would be the SIP, AIP and DIP metadata features for the production, preservation, and utilization by users points of electronic documents and they could be implemented according to the center's policies. Based on the previous study, the study introduced the flow charts among the production and progress process, application methods and packages of technical standard for electronic record information package at the center and suggested some issues that should be consistently researched in the field of records management based on the results.

• Journal of Environmental Policy
• /
• v.6 no.2
• /
• pp.97-122
• /
• 2007

In 2006, the Ministry of Environment of the Republic of Korea, completed the construction on national environmental geographic informations including National Environmental Assessment Map, Ecological Map, Land Cover Map and so on. At this point of time, it is necessary to establish the advance strategy on national environmental geographic information, considering the complicated characteristics. Therefore, this study suggests the advance strategy on national environmental geographic information, reflecting results of analyzing the given condition and the trend of informatization. National environmental geographic information has spacial quality to be managed dispersedly in a department unit or an operations unit. According to this quality, requirements for users who need the policy based on national environmental geographic information and complex information are not satisfactory. And, the information system centering the process of administrative affairs should be converted to one putting decision supporting first in importance. Therefore, this study sets up "the realization of the sustainable land management system by advancing national environmental geographic information" as the vision of the advancing strategy. In order to accomplish the vision, this study established the purpose as follow; constructing strategic and geographic information based on knowledge, arranging the foundation to open information to the public transparently, building expanded and integrated national environmental geographic information, embodying the environmental administration based on national environmental geographic information, enhancing the efficiency of national environmental geographic information, and supporting efficiently the process of administrative affairs. And this study suggests executive plans to achieve the vision and the purpose as next; developing the quality control program to verify the information confidence, building the system to integrate and to provide environmental information, collecting information, readjusting laws and regimes in parts of the construction, the application and the management of the system, and operating the task process, human power, organization and information technology. This study puts the emphasis on providing the turning opportunity politically which is possible to make sure of the information confidence in quality, advancing from the expansion of one in quantity. However, this improvement strategy doesn't reflect all national environmental geographic information and current status of environmental administrations. Therefore, for applying the result of this study to the actual environmental administration, it is necessary to discuss regularly the systematic categorization of national environmental geographic information, to interview with the contracting parties and so on hereafter.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.1-18
• /
• 2014

Over the past years RFID/SN has been an elementary technology in a diversity of applications for the ubiquitous environments, especially for Internet of Things. However, one of obstacles for widespread deployment of RFID technology is the inherent unreliability of the RFID data streams by tag readers. In particular, the problem of false readings such as lost readings and mistaken readings needs to be treated by RFID middleware systems because false readings ultimately degrade the quality of application services due to the dirty data delivered by middleware systems. As a result, for the higher quality of services, an RFID middleware system is responsible for intelligently dealing with false readings for the delivery of clean data to the applications in accordance with the tag reading environment. One of popular techniques used to compensate false readings is a sliding window filter. In a sliding window scheme, it is evident that determining optimal window size intelligently is a nontrivial important task in RFID middleware systems in order to reduce false readings, especially in mobile environments. In this paper, for the purpose of reducing false readings by intelligent window adaption, we propose a new adaptive RFID data cleaning scheme based on window sliding for a single tag. Unlike previous works based on a binomial sampling model, we introduce the weight averaging. Our insight starts from the need to differentiate the past readings and the current readings, since the more recent readings may indicate the more accurate tag transitions. Owing to weight averaging, our scheme is expected to dynamically adapt the window size in an efficient manner even for non-homogeneous reading patterns in mobile environments. In addition, we analyze reading patterns in the window and effects of decreased window so that a more accurate and efficient decision on window adaption can be made. With our scheme, we can expect to obtain the ultimate goal that RFID middleware systems can provide applications with more clean data so that they can ensure high quality of intended services.