• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.4
• /
• pp.175-185
• /
• 2002

In this paper, a new fully digital current control method of UPS inverter, which is based on an internal model control, is proposed. In the proposed control system, overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The internal model controller is adopted to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. That is, the average current of filter capacitor is been exactly equal to the reference current with a time lag of two sampling intervals. Therefore, this method has an essentially overshoot free reference-to-output response with a minimum possible rise time. The effectiveness of the proposed control system has been verified by the simulation and experimental respectively. From the simulation and experimental results, the proposed system is achieved the robust characteristics to the calculation time delay and parameter variation as well as very fast dynamic performance, thus it can be effectively applied to the power supply for the critical load.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.33-47
• /
• 1992

A study for the material and geometric nonlinear analysis of segmentally erected cable-supported prestressed concrete plane frames including the time-dependent effects due to load history, creep, shrinkage, aging of concrete, and relaxation of prestressing steel and cable is presented. Updated Lagrangian formulation is used to account for the nonlinear behavior of the structure. For the time-dependent analysis. the time domain is divided into a discrete number of intervals, and a step-forward integration is performed as the solution progresses in the time domain. At each time step. a nonlinear finite element analysis is performed in the space domain. Segmental erection methods are implemented by providing the capability to change the configuration of the structure at any time step of the solution. The computer program CFRAME is developed and a series of numerical examples are presented to study the validity of the program.

• Wind and Structures
• /
• v.14 no.4
• /
• pp.337-357
• /
• 2011

The collection of wind speed time series by means of digital data loggers occurs in many domains, including civil engineering, environmental sciences and wind turbine technology. Since averaging intervals are often significantly larger than typical system time scales, the information lost has to be recovered in order to reconstruct the true dynamics of the system. In the present work we present a simple algorithm capable of generating a real-time wind speed time series from data logger records containing the average, maximum, and minimum values of the wind speed in a fixed interval, as well as the standard deviation. The signal is generated from a generalized random Fourier series. The spectrum can be matched to any desired theoretical or measured frequency distribution. Extreme values are specified through a postprocessing step based on the concept of constrained simulation. Applications of the algorithm to 10-min wind speed records logged at a test site at 60 m height above the ground show that the recorded 10-min values can be reproduced by the simulated time series to a high degree of accuracy.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.6
• /
• pp.288-295
• /
• 2001

Predischarges in nonuniform electric field stressed by lightning impulse voltagesin SF(sub)6-$N_2$mixtures are initiated by streamer coronas. Due to field ehnancement at a protrusion point of electrodes new ionization processes occur and a precursor, which leads to a first leader, is created. The leader proceeds step by step to the opposite electrode and the final jump bridges the test gap. It was found that the predischarge is propagated with a leader mechanism of stepwise expansion from the predischarge current waveforms measured by a shunt. The predischarge current is closely related to the amplitude and polarity of applied voltages, the gas pressure and the gap geometry. The time intervals between step leaders for the positive and negative polarities were inversely proportional to V.P$^2$. When the gas pressure increases in the positive polarity, statistical time lag to statistical time lag to streamer corona inception increase slightly, but the formative time lag to flashover is significantly decreased.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.495-497
• /
• 2013

Wireless sensor networks (WSNs) have emerged as an attractive and key research area over the last decade. Time synchronization is a vital part of infrastructure for any distributed system. In embedded sensor networks, time synchronization is an essential service for correlating data among nodes and communication scheduling. This is realized by exchanging messages that are time stamped using the local clocks on the nodes. Various time synchronization protocols have been proposed aiming to attain high synchronization accuracy, high efficiency and low communication overhead. However, it requires that the time between resynchronization intervals to be as large as possible to obtain a system which is energy efficient having low communication overhead. This paper presents a simple but effective skew compensation algorithm that measures the skew rate of the sensor nodes with respect to the reference node and calibrates itself to compensate for the difference in the frequencies of the nodes. The proposed method can be incorporated with any existing time synchronization protocol for WSNs.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.79-89
• /
• 1996

The purpose of this study was to examine the dead time effects and derive the correction factor. Using the thyroid probe and lucite cylindrical phantom, $^{99m}Tc$ 10.50mCi and $^{123}I$ 2.08mCi were counted with medical spectrometer at intervals of 2 hours for 43hrs and 79 hours. respectively. $^{123}I$ 2.06mCi was counted at intervals of 6 hours for 910 hours. To measure the starting point of dead time effect, the radioactivity was measured with dose calibrator in each time. The dead time effects started at about 0.80mCi at all distances for $^{99m}Tc$, and about 1.00mCi for $^{123}I$. The radioactivity corresponding to 20％ counts loss is 1.29(center), 1.28(2cm), 1.31(4cm), 1.13(6cm)mCi for $^{99m}Tc$ and 1.39mCi for $^{123}I$. The correction factors for 2mCi of radioactivity as an example were 1.52(center), 1.52(2cm), 1.50(4cm), 1.58(6cm) for $^{99m}Tc$ and 1.58 for $^{123}I$.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.677-692
• /
• 1998

In order to study the effects of cigarette smoking on periodontal tissue, gingival fibroblast from the smoking and nonsmoking groups were cultured and each group were treated with nicotine(50ng/ml,100ng/ml) and NNK(50ng/ml, 100ng/ml) to test their attachment ability at time intervals of 30minutes, 60minutes, 90minutes, 120minutes, and 240minutes. Using the same method, the growth each group treated with nicotine and NNK in order to compare their attachment ability and growth rate was done. The Results are as follows. 1. In comparing the attachment ability and growth rate between the smoking and non-smoking group were significantly higher in all time intervals. 2. When the attachment ability was com-pared among these two groups after treatment with nicotine and NNK, the non-smoking group showed decrease in attachment ability while the smoking group was not affected. 3. The growth rate of these two groups were compared after treating with nicotine and NNK. The growth rate of fibroblast from the non-smoking group decreased while fibroblast from the smoking group was not affected. These results suggest that fibroblast from the non-smoking group showed higher attachment ability, growth rate, and sensitivity to nicotine and NNK. This implies that fibroblast from the non-smoking group is a more reliable source in testing the cytotoxicity of nicotine and NNK. Also it could be reasonable to think that nicotine and NNK is a probable cause for problems in attachment and repair mechanism.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.61-71
• /
• 2012

PURPOSE. To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS. Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS. Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION. Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.1
• /
• pp.30-36
• /
• 2020

This study aimed to investigate heart rate variability (HRV) characteristics of cold pattern with repeated measurement data. Participants were taken from a Daejeon University cohort study from 2015 to 2018. Forty-seven of the participants studied displayed cold pattern while 23 showed signs of non-cold pattern. HRV was measured in supine position for 5 minutes at each year, and an 8-item cold pattern questionnaire was used for the diagnosis of cold pattern. SDNN (standard deviation of the NN intervals) and RMSSD (the square root of the mean squared differences of successive NN intervals) were used as time domain analysis, and TP (total power), VLF (power in very low frequency range), LF (power in low frequency range), HF (power in high frequency range), LF norm (LF power in normalized units), HF norm (HF power in normalized units) and LF/HF were used as frequency domain analysis. In the Mann-Whitney U test, LF norm, HF norm, and LF/HF showed differences between the cold pattern group and non-cold pattern group at every measurement, and in the independent t-test, the differences were also observed at three points except for the baseline (2015). In the repeated measures ANOVA, the interaction effects were not observed in all HRV parameters, but the time period effects were observed in SDNN, RMSSD, TP, VLF, LF and HF. There were significant differences between those two groups in LF norm, HF norm and LF/HF. This study suggests that LF norm, HF norm and LF/HF might be a useful indicator of cold pattern properties.

• Journal of KIISE:Databases
• /
• v.34 no.1
• /
• pp.59-69
• /
• 2007

The trajectory of a tag in RFID system is represented as a interval that connects two spatiotemporal locations captured when the tag enters and leaves the vicinity of a reader. Whole trajectories of a tag are represented as a set of unconnected interval because the location of the tag which left the vicinity of a reader is unknown until it enters the vicinity of another reader. The problems are that trajectories of a tag are not connected. It takes a long time to find trajectories of a tag because it leads to searching the whole index. To solve this problem, we propose a technique that links two intervals of the tag and an index scheme called SLR-tree. We also propose a sharing technique of link information between two intervals which enhances space utilization of nodes, and propose a split policy that preserves shared-link information. And finally, we evaluate the performance of the proposed index and prove that the index processes history queries efficiently.