• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.156-165
• /
• 2023

IEEE 802.15.4e-TSCH is recognized as a wireless industrial sensor network standard used in IoT systems. To ensure both power savings and reliable communications, the TSCH standard uses techniques including channel hopping and bandwidth reserve. In TSCH mode, scheduling is crucial because it allows sensor nodes to select when data should be delivered or received. Because a wide range of applications may necessitate energy economy and transmission dependability, we present a distributed approach that uses a cluster tree topology to forecast scheduling requirements for the following slotframe, concentrating on the Poisson model. The proposed Optimized Minimal Scheduling Function (OMSF) is interested in the details of the scheduling time intervals, something that was not supported by the Minimal Scheduling Function (MSF) proposed by the 6TSCH group. Our contribution helps to deduce the number of cells needed in the following slotframe by reducing the number of negotiation operations between the pairs of nodes in each cluster to settle on a schedule. As a result, the cluster tree network's error rate, traffic load, latency, and queue size have all decreased.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.677-684
• /
• 2006

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.668-678
• /
• 2006

In designing a video-on-demand (VoD) system, one of the major challenges is how to reduce the viewer's waiting time maintaining a given bandwidth allocation and how to reduce the client's buffer requirements. To solve these problems, many VoD schemes were proposed. However, most VoD schemes require managing many segments of a video, frequency channel hopping, and using many channels at the same time. Therefore, to the complexity is a barrier to implementation. In this paper, we propose a fast staggered broadcasting scheme which has a simple structure and substantially improved VoD efficiency. The numerical results demonstrate that the viewer's waiting time of the fast staggered broadcasting scheme is close to the fast broadcasting scheme and the buffer requirements of this can be adapt for demanding rate by adjusting the short front part of a video sizes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.85-91
• /
• 2012

In this paper, we implemented a Ka-band frequency synthesizer for millimeter wave seeker. we designed for high frequency resolution and frequency hopping response time in the digital synthesis method which uses DDS(Direct Digital Synthesizer). but frequency bandwidth was limited low frequency because DDS output frequency was limited 1/2 by system clock. thus, frequency synthesizer was converted to Ka-band using the frequency multiplier ${\times}4$ and local oscillator. proposed frequency synthesizer was bandwidth 500MHz, frequency switching time was $0.7{\mu}s$, spurious level was suppressed below -52dBc. phase noise was -99dBc/Hz at offset 100kHz and flatness was ${\pm}1dB$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1177-1188
• /
• 2004

This paper describes and analyzes the performance of MB-OFDM UWB system that is suggested as one of standards in IEEE 802.15 TG3a for UWB application. UMBchannel model that has been contributed in IEEE 802.15 SG3a is a wideband channel model of 6Ghz bandwidth, so we modify it to have 3 subband channels that are obtained by filtering conventional U Channel, considering center frequency hopping and system bandwidth. From simulations, we compare performances of MB-OFDM system in AWGN and WB channel and verify the frequency and time domain diversity gains from time End frequency spreading technique. We also compare and analyze the performance of proposed SFBC MB-OFDM with that of conventional MB-OFDM system. Simulation results show SFBC MB-OFDM system outperforms conventional MB-OFDM system about 1.5dB of Eb/No at target BER of 10$^{-m4}$./.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.724-729
• /
• 2008

This paper presents the calculation of the required bandwidth of common frequency bandwidth applying queueing theory for maximizing the efficiency of frequency resource of WPAN(Wireless Personal Area Network) based Digital acoustic and communication devices. It assumed that LBT device(ZigBee) and FH devices (DCP, RFID and Bluetooth) coexist in the common frequency band for WPAN based Digital acoustic and communication devices. Frequency hopping (FH) and listen before talk (LBT) have been used for interference avoidance in the short range device (SRD). The LBT system transmits data after searching for usable frequency bandwidth in the radio wave environment. However, the FH system transmits data without searching for usable frequency bandwidth. The queuing theory is employed to model the FH and LBT system, respectively. As a result, the throughput for each channel was analyzed by processing the usage frequency and the interval of service time for each channel statistically. When common frequency bandwidth is shared with SRD using 250mW, it was known that about 35 channels were required at the condition of throughput 84%, which was determined with the input condition of Gaussian distribution implying safety communication. Therefore, the common frequency bandwidth is estimated with multiplying the number of channel by the bandwidth per channel. These methodology will be useful for the efficient usage of frequency bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.401-407
• /
• 2009

The multi-band (MB) ultra-wideband (UWB) communication system divides its available frequency spectrum in 3.1 to 10.6GHz into 16 sub-bands, which leads to inherent disparities between carrier frequencies of each sub-band. For instance, the highest carrier frequency is 2.65 times higher than the lowest one. Since the propagation loss is proportional to the square of the transmission frequency, the propagation loss on the sub-band having the highest carrier frequency is approximately 7 times larger than that on the sub-band having the lowest carrier frequency, which results in disparities between received signal powers on each sub-band. In this paper, we propose a novel correlation scheme for frequency hopping (FH) MB UWB communications, where the correlation time is adaptively adjusted relative to the sub-band, which reduces the disparity between the received signal energies on each sub-band. Such compensation for lower received powers on sub-bands having higher carrier frequency leads to an improvement on the total average bit error rate (BER) of the entire FH MB UWB communication system. We analyze the performance of the proposed correlation scheme in Nakagami fading channels, and it is shown that the performance gain provided by the proposed correlator is more significant as the Nakagami fading index n increases (i.e., better channel conditions).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.547-553
• /
• 2011

This study has redefined the concepts of mobility indexes and potential demand, standards to evaluate areas with the worst public transportation system and applied the relevant indexes to select the areas with the worst public transportation mobility and present a method to set direct public transportation lines between these regions. The mobility indexes and indexes to evaluate potential demand were applied to select the regions with the worst public transportation systems in four metropolitan cities and case studies were carried out on direct lines provided between these regions. The analysis results showed that in public transportation mobility blind spots, public transportation takes much longer than driving an automobile or public transportation services are not provided. In addition, the analysis showed that a direct lines system to solve such worst off regions should be built to have public transportation take as much time as driving an automobile by establishing lines for automobiles only, minimize time lost from hopping up and down a bus and maximize connections.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1076-1086
• /
• 2006

In providing video-on-demand (VoD) services to a number of clients through networks, the bandwidth requirements of video transmission restrict VoD services. For this reason, many significant broadcasting-based VoD schemes have been proposed to efficiently support services. However, the broadcasting-based VoD schemes approach needs frequency channel hopping, using many channels at the same time and managing many segments of a video. These make it difficult to implement. In this paper, we propose a Harmonic Staggered broadcasting scheme which has a simple structure and substantially improved VoD efficiency. The numerical results demonstrate that the viewer's waiting time of the Harmonic Staggered broadcasting scheme is close to the harmonic broadcasting scheme and the maximum buffer requirements of this can be adapted for demanding rate by adjusting the short front part of a video sizes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1178-1185
• /
• 2009

In this paper, a wideband ultra-high speed & high purity discrete frequency synthesizer having minimum 2.5 MHz step size was proposed. To achieve fast and wideband operation, discrete frequencies were synthesized by mixing of 3 different pre-synthesized 16 frequencies made from fixed PLL and frequency dividers. Frequencies with discrete 2.5 MHz step were produced in 710~1,610 MHz. The measured hopping response time was 350 nsec average, output level was 21.5 dBm average with 2.65 dB flatness, spurious and harmonics level were suppressed below -60 dBc, and phase noise was -94 dBc/Hz@100 Hz. Also, a new measurement method for synthesizer response time was described.