• 제목/요약/키워드: Time division multiple control

검색결과 160건 처리시간 0.024초

새로운 시분할 다중 제어 기법에 기반한 다중 출력 충전기 (Multiple Output Charger based on the Novel Time Division Multiple Control Technique)

  • 트란반롱;최우진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2013년도 추계학술대회 논문집
    • /
    • pp.13-14
    • /
    • 2013
  • Multiple output converters (MOCs) are widely used for applications which require various kinds of the output voltages due to its advantages in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied to the double ended forward converter for the multiple battery charger. Additional benefit of the proposed topology is to require only one secondary winding in the transformer for all the outputs. The proposed converter can charge two different kinds of batteries or same kind of batteries in different state of charges (SOCs) by CC/CV mode independently with the even degree of tight regulation, thereby satisfying the ripple requirements for each battery.

  • PDF

새로운 시분할 다중 제어 기법을 이용한 소프트 스위칭 다중 출력 충전기 (Soft Switching Multiple Output Charger By Using Novel Time Division Multiple Control Technique)

  • 트란반롱;최우진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 전력전자학술대회 논문집
    • /
    • pp.191-192
    • /
    • 2014
  • Multiple output converters (MOCs) are widely used for applications which require various levels of the output voltages due to their benefits in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied for the multiple output battery charger based on the phase shift full bridge topology to charge a multiple number of batteries at one time. The proposed converter can charge three different kinds of batteries or same kind of batteries in different state of charges (SOCs) by using constant current/constant voltage (CC/CV) charge mode independently. At the same time it can provide an even degree of tight regulation for each output to satisfy the strict ripple requirement of the battery. The validity and feasibility of the proposed method are verified through the experiments.

  • PDF

Maximum Ratio Transmission for Space-Polarization Division Multiple Access in Dual-Polarized MIMO System

  • Hong, Jun-Ki;Jo, Han-Shin;Mun, Cheol;Yook, Jong-Gwan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권8호
    • /
    • pp.3054-3067
    • /
    • 2015
  • The phenomena of higher channel cross polarization discrimination (XPD) is mainly observed for future wireless technologies such as small cell network and massive multiple-input multiple-output (MIMO) system. Therefore, utilization of high XPD is very important and space-polarization division multiple access (SPDMA) with dual-polarized MIMO system could be a suitable solution to high-speed transmission in high XPD environment as well as reduction of array size at base station (BS). By SPDMA with dual-polarized MIMO system, two parallel data signals can be transmitted by both vertically and horizontally polarized antennas to serve different mobile stations (MSs) simultaneously compare to conventional space division multiple access (SDMA) with single-polarized MIMO system. This paper analyzes the performance of SPDMA for maximum ratio transmission (MRT) in time division duplexing (TDD) system by proposed dual-polarized MIMO spatial channel model (SCM) compare to conventional SDMA. Simulation results indicate that how SPDMA utilizes the high XPD as the number of MS increases and SPDMA performs very close to conventional SDMA for same number of antenna elements but half size of the array at BS.

다중 컴퓨터와 다중 터미날을 상호 접속하기위한 T(time)-스위칭 시스템의 구현 (An implementation of T(time)-switching system for the interconnection of multiple terminals and computers)

  • 나종래;김경진;정명진
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
    • /
    • pp.184-187
    • /
    • 1986
  • A time-division-mutiplexed switching system is implemented for connecting various computers and terminals in the laboratory environment.

  • PDF

An SS_RRA Protocol for Integrated Voice/Data Services in Packet Radio Networks

  • Lim, In-Taek
    • Journal of information and communication convergence engineering
    • /
    • 제5권2호
    • /
    • pp.88-92
    • /
    • 2007
  • In this paper, an SS-RRA protocol that is based on Code Division Multiple Access is proposed and analyzed under the integrated voice and data traffic load. The backward logical channels consist of slotted time division frames with multiple spreading codes per slot. The protocol uses a reservation mechanism for the voice traffic, and a random access scheme for the data traffic. A discrete-time, discrete-state Markov chain is used to evaluate the performance. The numerical results show that the performance can be significantly improved by a few distinct spreading codes.

Enhanced TDMA based MAC Protocol for Adaptive Data Control in Wireless Sensor Networks

  • Alvi, Ahmad Naseem;Bouk, Safdar Hussain;Ahmed, Syed Hassan;Yaqub, Muhammad Azfar;Javaid, Nadeem;Kim, Dongkyun
    • Journal of Communications and Networks
    • /
    • 제17권3호
    • /
    • pp.247-255
    • /
    • 2015
  • In this paper, we propose an adaptive time division multiple access based medium access control (MAC) protocol, called bitmap-assisted shortest job first based MAC (BS-MAC), for hierarchical wireless sensor networks (WSNs). The main contribution of BS-MAC is that: (a) It uses small size time slots. (b) The number of those time slots is more than the number of member nodes. (c) Shortest job first (SJF) algorithm to schedule time slots. (d) Short node address (1 byte) to identify members nodes. First two contributions of BS-MAC handle adaptive traffic loads of all members in an efficient manner. The SJF algorithm reduces node's job completion time and to minimize the average packet delay of nodes. The short node address reduces the control overhead and makes the proposed scheme an energy efficient. The simulation results verify that the proposed BS-MAC transmits more data with less delay and energy consumption compared to the existing MAC protocols.

SOFTWARE LINEAR AND EZPONENTIAL ACELERATION/DECELERTION METHODS FOR INDUSTRIAL ROBOTS AND CNC MACHINE TOOLS

  • Kim, Dong-Il;Song, Jin-Il;Lim, Yong-Gtu;Kim, Sungkwun
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.1904-1909
    • /
    • 1991
  • Software linear and exponential acceleration/deceleration algorithms for control of machine axes of motion in industrial robots and CNC machine tools are proposed. Typical hardware systems used to accelerate and decelerate axes of motion are mathematically analyzed. Discrete-time state equations are derived from the mathematical analyses for the development of software acceleration/deceleration algorithms. Synchronous control method of multiple axes of motion in industrial robots and CNC machine tools is shown to be easily obtained on the basis of the proposed acceleration/deceleration algorithms. The path error analyses are carried out for the case where the software linear and exponential acceleration/deceleration algorithms are applied to a circular interpolator. A motion control system based on a floating point digital signal processor (DSP) TMS 320C30 is developed in order to implement the proposed algorithms. Experimental results demonstrate that the developed algorithms and the motion control system are available for control of multiple axes and nonlinear motion composed of a combination of lines and circles which industrial robots and CNC machine tools require.

  • PDF

FlexRay: 프로토콜, 시간 계층, 메시지 프레임, 커뮤니케이션 컨트롤러, 적합성 시험 (FlexRay: Protocol, Time Hierarchy, Message Frame, Communication Controller, and Conformance Test)

  • 한석준;신수아;박나은;박찬;이대기;이성수
    • 전기전자학회논문지
    • /
    • 제27권4호
    • /
    • pp.668-678
    • /
    • 2023
  • FlexRay는 차량 내 네트워크(In-Vehicle Network)로 최대 2개의 채널로 각 채널당 최대 10Mbps 전송 속도를 가진다. FlexRay는 TDMA(Time Division Multiple Access)와 FTDMA(Flexible Time division Multiple Access) 방식을 사용하여 효율적으로 데이터를 전송하면서도 실시간 통신을 보장하기 때문에 파워트레인 등 안전성이 필수적인 차량 모듈의 실시간 전자 제어에 사용된다. 본 논문에서는 ISO 17458 표준과 FlexRay 컨소시엄 문서를 바탕으로 FlexRay의 프로토콜(Protocol), 시간 계층(Time Hierarchy), 메시지 프레임(Message Frame), 커뮤니케이션 컨트롤러(Communication Controller), 적합성 시험(Conformance Test)에 대해 자세히 설명한다.

Stability Analysis of a Multi-Link TCP Vegas Model

  • Park, Poo-Gyeon;Choi, Doo-Jin;Choi, Yoon-Jong;Ko, Jeong-Wan
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1072-1077
    • /
    • 2004
  • This paper provides a new approach to analyze the stability of a general multi-link TCP Vegas, which is a kind of feedback-based congestion algorithm. Whereas the conventional approaches use the approximately linearized model of the TCP Vegas along equilibrium pints, this approach models a multi-link TCP Vegas network in the form of a piecewise linear multiple time-delay system. And then, based on the exactly characterized dynamic model, this paper presents a new stability criterion via a piecewise and multiple delay-dependent Lyapunov-Krasovskii function. Especially, the resulting stability criterion is formulated in terms of linear matrix inequalities (LMIs).

  • PDF

위성 시분할다중접속 통신시스템을 위한 실시간 자동이득제어기 설계 및 구현 (Design and Implementation of Real Time AGC for Satellite TDMA Communication Systems)

  • 이희수
    • 한국통신학회논문지
    • /
    • 제38B권4호
    • /
    • pp.298-304
    • /
    • 2013
  • 일반적으로 위성 시분할다중접속 (TDMA, Time Division Multiple Access) 통신시스템 설계 시 채널감쇄를 반드시 고려 해야하며 위성 통신시스템은 급격한 채널환경 변화에서도 안정적인 네트워크 구성을 위해 실시간 자동 이득제어기 (AGC, Automatic Gain Control)가 필수적이다. 본 논문에서는 위성 TDMA 통신시스템에서 타임 슬롯에 실시간 적용이 가능한 AGC를 제안한다. 제안하는 실시간 AGC 성능을 확인하기 위해 위성 TDMA 시스템을 설계 및 구현하였고 제안하는 AGC 알고리듬을 적용하여 시스템의 비트 오율을 확인하였다. 이 결과는 추후 위성 TDMA 통신시스템의 안정성을 높이는데 유용하게 활용될 수 있을 것으로 예상된다.