• 제목/요약/키워드: Time dispersion

검색결과 988건 처리시간 0.031초

단일벽 탄소나노튜브의 분산도 정량적 평가 (The Quantitative Characterization of the Dispersion State of Single-Walled Carbon Nanotubes)

  • 윤도경;최재붕;김영진;백승현
    • 대한기계학회논문집A
    • /
    • 제31권4호
    • /
    • pp.483-489
    • /
    • 2007
  • We have investigated quantitative measurement techniques of the degree of dispersion of single-walled carbon nanotubes (SWNTs). SWNTs were suspended in aqueous media using a sodium dodecyl sulfate (SDS) surfactant. SWNTs with different dispersion states were prepared by controlling the intensity and time of sonication and centrifugation. The laser spectroscopic techniques were employed to characterize the dispersion state; i.e., raman fluorescence and absorption spectroscopic techniques. Raman spectroscopy has been used to probe the dispersion and aggregation state of SWNTs in solution. Individually suspended SWNTs show increased fluorescence peaks and decreased roping peaks at a raman shift 267 $cm^{-1}$ compared with the samples containing bundles of SWNTs. The ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectrum of decanted supernatant samples show sharp van Hove singularity peaks

열적으로 성층화된 횡단류에 분출된 제트의 난류확산 거동(I) (Turbulent Dispersion Behavior of a Jet Issued into Thermally Stratified Cross Flows(I))

  • 김경천;김상기
    • 대한기계학회논문집B
    • /
    • 제23권2호
    • /
    • pp.218-225
    • /
    • 1999
  • Flow visualization study has been conducted to simulate the turbulent dispersion behavior of a crossflow jet physically under the conditions of various thermal stratification in a wind tunnel. A smoke jet with the constant ratio of the jet to freestream velocity is injected normally to the cross flow of the thermally stratified wind tunnel(TSWT) for flow visualization. The typical natures of the smoke dispersion under different thermal stratifications such as neutral, weakly stable, strongly stable, weakly unstable, strongly unstable and inversion layer are successfully reproduced in the TSWT. The Instantaneous velocity and temperature fluctuations are measured by using a cold and hot-wire combination probe. The time averaged dispersion behaviors, the centerline trajectories, the spreading angles and the virtual origins of the cross jet are deduced from the edge detected images with respect to the stability parameter. All the general characteristics of the turbulent dispersion behavior reveal that the definitely different dispersion mechanisms are inherent in both stable and unstable conditions. It is conjectured that the turbulent statistics obtained in the various stability conditions quantitatively demonstrate the vertical scalar flux plays a key role in the turbulent dispersion behavior.

산지 내 오염물질 확산의 2차원 수치해석 (Numerical Analysis of the Two-Dimensional Pollutant Dispersion Over Hilly Terrain)

  • 김현구;이정묵
    • 한국대기환경학회지
    • /
    • 제13권5호
    • /
    • pp.383-396
    • /
    • 1997
  • Numerical prediction of the pollutant dispersion over a two-dimensional hilly terrain is presented. The dispersion model used in the present work is based on the gradient diffusion theory and the finite-volume method on a non-orthogonal boundary-fitted grid system. The numerical model is validated by comparing the results with the available experimental data for the flat-floor dispersion within a turbulent boundary-layer. The numerical error analysis is performed based on the guideline of Kasibhatla et al.(1988) for the elevated-source dispersion in the flat-floor boundary layer having a power-law velocity and linear eddy-diffusivity profile. The influences of the two-dimensional hilly terrain on the dispersion from a continuously released source are numerically investigated by changing the emission locations and heights. It is found that the distributions of ground-level concentration are strongly influenced by the source location and the emission height. Hence, the terrain amplification factor is greatly enhanced when the pollutant source is located within a flow separation region. Dispersion from a source of short duration is also simulated and the duration time of the pollutant is compared at several downstream locations on a hilly terrain. The results of the numerical prediction are applied to the evaluation of environmental impacts due to the automobile exhausts at the seashore highway with a parallel mountain range.

  • PDF

지진해일 전파 수치모의를 위한 ADCIRC 유한요소모형의 일차원 분산특성 분석 (Analysis of 1-D Dispersion Property of ADCIRC Finite Element Model for the Simulation of Tsunami Propagation)

  • 윤성범;임채호;윤기승;최병호
    • 한국해안해양공학회지
    • /
    • 제15권2호
    • /
    • pp.108-115
    • /
    • 2003
  • 천수방정식에 기초한 ADCIRC 유한요소모형을 이용하여 지진해일 전파를 수치모의할 때 분산효과를 고려하기 위한 두 가지 일차원 분산보정기법을 개발하였다. 첫 번째 방법은 음해법으로, 각 시간단계의 공간미분항에 부여되는 가중치를 조정함으로써 분산보정을 수행한다. 두 번째는 양해법으로, 유한요소의 크기를 조정하여 분산을 고려한다. 새로운 기법을 이용하여 계산한 수치해와 파의 분산효과를 고려한 해석해의 비교를 통해 본 연구에서 제안한 분산보정기법의 타당성을 확인하였다.

원유가격이 국가 간 가격분산에 미치는 영향에 대한 실증 연구 (An Empirical Study of the Effect of Oil Prices on International Price Dispersion)

  • 이인구
    • 무역학회지
    • /
    • 제43권2호
    • /
    • pp.69-86
    • /
    • 2018
  • 본 연구는 1999년부터 2013년까지 300개 개별상품의 소매가격자료를 사용하여 원유가격이 가격분산에 미치는 영향을 분석한다. 실증분석 결과에 따르면 원유가격 상승은 미국내 도시 간 가격분산은 증가시키는 반면, World, OECD 등 국가 간 가격분산에는 유의미한 영향을 미치는 않는 것으로 추정된다. 이는 국내 지역 간 차익거래가 원유가격 변화에 따른 수송비용의 변화에 민감하게 반응하는 반면, 국가 간 가격분산은 소득 격차 및 소비자 선호 등 기타 요인에 의해 주로 결정된다는 것을 의미한다.

  • PDF

직조된 SiC 섬유에 무전해 구리도금 시 도금 조건의 영향 (Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric)

  • 이기환;손유한;한태양;이경진;김혜성;한준현
    • 한국표면공학회지
    • /
    • 제50권4호
    • /
    • pp.244-250
    • /
    • 2017
  • Effects of plating conditions (dispersant concentration, plating time, and ultrasonication) on electroless Cu plating on SiC fabric woven by crossing of SiC continuous fibers vertically were studied. The ultrasonic dispersion treatment not only did not improve the dispersion of the SiC fibers, but also did not change the plating thickness. The ultrasonication in the pretreatment step of electroless plating did not improve the dispersion of the fibers, while the ultrasonication in the plating step enhanced the dispersion of the fibers and decreased the thickness of the Cu films. It was possible to control the thickness of the Cu coating layer as well as the dispersion of the fibers in the fabric by changing the plating conditions such as dispersant concentration, plating time, and ultrasonication, but it was very difficult to coat copper on the intersection of vertical fibers in the fabric.

황사의 확산예측을 위한 기상정보의 시간해상도에 관한 수치연구 (Numerical study on temporal resolution of meteorological information for prediction of Asian dust)

  • 이순환;곽은영;류찬수;문윤섭
    • 한국환경과학회지
    • /
    • 제13권10호
    • /
    • pp.891-902
    • /
    • 2004
  • In order to predict air pollution and Yellow-sand dispersion precisely, it is necessary to clarify the sensitivity of meteorological field input interval. Therefore numerical experiment by atmospheric dynamic model(RAMS) and atmospheric dispersion model(PDAS) was performed for evaluating the effect of temporal and spatial resolution of meteorological data on particle dispersion. The results are as follows: 1) Base on the result of RAMS simulation, surface wind direction and speed can either synchronize upper wind or not. If surface wind and upper wind do not synchronize, precise prediction of Yellow-sand dispersion is strongly associated with upwelling process of sand of particle. 2) There is no significant discrepance in distribution of particle under usage of difference temporal resolution of meteorological information at early time of simulation, but the difference of distribution of particles become large as time goes by. 3) There is little difference between calculated particles distributions in dispersion experiments with high temporal resolution of meteorological data. On the other hand, low resolution of meteorological data occur the quantitative difference of particle density and there is strong tendency to the quantitative difference.

The influence of the rheological parameters on the dispersion of the flexural waves in a viscoelastic bi-layered hollow cylinder

  • Kocal, Tarik;Akbarov, Surkay D.
    • Structural Engineering and Mechanics
    • /
    • 제71권5호
    • /
    • pp.577-601
    • /
    • 2019
  • The paper investigates the influence of the rheological parameters which characterize the creep time, the long-term values of the mechanical properties of viscoelastic materials and a form of the creep function around the initial state of a deformation of the materials of the hollow bi-layered cylinder on the dispersion of the flexural waves propagated in this cylinder. Constitutive relations for the cylinder's materials are given through the fractional exponential operators by Rabotnov. The dispersive attenuation case is considered and numerical results related to the dispersion curves are presented and discussed for the first and second modes under the first harmonic in the circumferential direction. According to these results, it is established that the viscosity of the materials of the constituents causes a decrease in the flexural wave propagation velocity in the bi-layered cylinder under consideration. At the same time, the character of the influence of the rheological parameters, as well as other problem parameters such as the thickness-radius ratio and the elastic modulus ratio of the layers' materials on the dispersion curves, are established.

음속 확산을 이용한 잘피(거머리말) 서식지의 기공률 추정 (Estimation of Void Fraction in the Seagrass (Zostera Marina) Bed Using Sound Speed Dispersion)

  • 라형술;나정열;이성미
    • 한국음향학회지
    • /
    • 제27권1호
    • /
    • pp.33-39
    • /
    • 2008
  • 공기방울에 의한 음속 확산 (sound speed dispersion)을 측정하여 잘피 서식지에서 광합성시 발생되는 기공률을 추정하였다. 해상 실험은 니질로 구성된 거머리말 서식지에서 광합성이 활발한 주간과 상대적으로 덜 활발한 야간에 실시되었고 120 kHz 정현파 음원을 이용하여 잘피 서식지로부터 후방산란된 음향 신호를 획득하였다. 실험 결과 잘피 서식지로부터 수신된 신호의 도달 시간이 주/야간 차이가 있음을 확인하였고 도달 시간의 변화는 잘피의 광합성에 의해서 발생되는 공기방울에 의한 음속 확산이 원인임을 추정할 수 있었다.

응답 속도 200ms 이하의 편광모드분산 보상기 개발 (Development of Polarization Mode Dispersion Compensator with a response time less than 200ms)

  • 서재은;김상인;정기태
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.47-48
    • /
    • 2003
  • A polarization mode dispersion(PMD) compensator with a reponse time less than 200ms has been developed. In our PMD compensator, a reset-free $LiNbO_3$ polarization controller was used in order to reduce the response time, and the compensation algorithm was based on maximization of degree of polarizaiton(DOP).

  • PDF