• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.584-591
• /
• 2000

Power Quality Compensator(PQC) has been installed to protect the sensitive loads against the voltage disturbances, such as voltage sag and interruption. In general, static switch is used for the purpose of link between utility and PQC. So transfer operation of the static switch play a important part in the PQC. Many studies on the structure and control of PQC have been progressed in active, but these researches have been rarely mentioned about any voltage-disturbances-detection method to start the PQC operation. In this paper, a new voltage-disturbances-detection algorithm for computer application loads using the CBEMA/ITIC curve is proposed for transfer operation of the static switch. The proposed detection algorithm is implemented to get fast detecting time through the comparison of instantaneous 3-phase voltage values transferred to DC values in the synchronous reference frame with the operating reference values. To get the robust characteristics against the noise, a first order digital filter is designed. The magnitude falling and phase delay caused by the filter are compensated through the error normalizing and numerical analysis using transfer function, respectively. Finally, the validity of the proposed algorithm is proved by ACSL simulation and experimental results.

• Journal of KIISE:Software and Applications
• /
• v.32 no.10
• /
• pp.963-973
• /
• 2005

Increasing attention is being recently devoted to various problems inherent in the topological design of networks systems. The topological structure of these networks can be based on service centers, terminals (users), and connection cable. Lately, these network systems are well designed with tiber optic cable, because the requirements from users become increased. But considering the high cost of the fiber optic cable, it is more desirable that the network architecture is composed of a spanning tree. In this paper, we present a GA (Genetic Algorithm) for solving bicriteria network topology design problems of wide-band communication networks connected with fiber optic cable, considering the connection cost, average message delay, and the network reliability We also employ the $Pr\ddot{u}fer$ number (PN) and cluster string in order to represent chromosomes. Finally, we get some experiments in order to certify that the proposed GA is the more effective and efficient method in terms of the computation time as well as the Pareto optimality.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.593-605
• /
• 2014

In this paper, we propose the efficient HW/SW co-design method of light-weight cryptography such as HIGHT, PRESENT and PRINTcipher using GEZEL. At first the symmetric cryptographic algorithms were designed using the GEZEL language which is efficiently used for HW/SW co-design. And for the improvement of performance the HW optimization theory such as unfolding, retiming and so forth were adapted to the cryptographic HW module conducted by FSMD. Also, the operation modes of those algorithms were implemented using C language in 8051 microprocessor, it can be compatible to various platforms. For providing reliable communication between HW/SW and preventing the time delay the improved handshake protocol was chosen for enhancing the performance of the connection between HW/SW. The improved protocol can process the communication-core and cryptography-core on the HW in parallel so that the messages can be transmitted to SW after HW operation and received from SW during encryption operation.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.61-69
• /
• 2018

Research on additional indirect cost due to construction period extension in general contracts has continuously been active whereas the same for the subcontract operations has not been. In this research, we review previous research on evaluation methods for additional indirect costs which are widely being used on construction sites as well as previously proposed methods altogether, applying them to analyze model-cases for comparison. We acknowledge that this pattern for construction cost fluctuation over the construction period demonstrates an S-curve. This S-curve shaped indirect cost occurrence is then used to generate model-cases that are used throughout the research which models we applied previous evaluation methods on. Finally in pursuit of finding out some problems of evaluation methods, we came to derive a conclusion that the "Average Actual Cost Evaluation Method on Extended Duration," which, in turn, were proved to be valid for application on general contracts, was also valid for general application on subcontractor operations.

• Journal of Korea Game Society
• /
• v.15 no.3
• /
• pp.135-150
• /
• 2015

After the release of SDK in 2011, Kinect developed for the motion recognition games has been applied not only in game but also in various fields such as science, education, and health care. It has some problems as belated responses to player's movements, a lot of noise in the recognized data, and an untraceable player when the body is partially occluded. Because of Kinect's such peculiarities of playing environment, most Kinect games require the inconvenience of Kinect's location or player's posture correction. In this paper, we propose an interface correction method that minimizes the requirements to be asked players, manages the exceptions such as noise, and enables to process consistently the player's movements in the game using Kinect. Also, we present the delay time to be considered to develop the game using Kinect through the experiment.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.136-141
• /
• 2007

The Purpose Of This Paper Is To Use A Tactile Sensor To Compensate The Error Rate. Most Automated Sphygmomanometers Use The Oscillometric Method And Characteristic Ratio To Estimate Systolic And Diastolic Blood Pressure. However, Based On The Fact That Maximum Amplitude Of The Oscillometric Waveform And Characteristic Ratio Are Affected By Compliance Of The Aorta And Large Arteries, A Method To Measure The Artery Stiffness By Using A Tactile Sensor Was Chosen In Order To Integrate It With The Sphygmomanometer In The Future Instead Of Using Photoplethysmography. Since Tactile Sensors Have Very Weak Movements, Efforts Were Made To Maintain The Subject's Arm In A Fixed Position, And A 40hz Low Pass Filter Was Used To Eliminate Noise From The Power Source As Well As High Frequency Noise. An Analyzing Program Was Made To Get Time Delay Between The First And Second Peak Of The Averaged Digital Volume Pulse(${\Delta}t_{dvp}$), And The Subject's Height Was Divided By ${\Delta}t_{dvp}$ To Calculate The Stiffness Index Of The Arteries($Si_{dvp}$). Regression Equations Of Systolic And Diastolic Pressure Using $Si_{dvp}$ And Mean Arterial Pressure(Map) Were Computed From The Test Group (60 Subjects) Among A Total Of 121 Subjects(Age: $44.9{\pm}16.5$, Male: Female=40:81) And Were Tested In 61 Subjects To Compensate The Error Rate. Error Rates Considering All Subjects Were Systolic $4.62{\pm}9.39mmhg$, And Diastolic $14.40{\pm}9.62mmhg$, And Those In The Test Set Were $3.48{\pm}9.32mmhg,\;And\;14.34{\pm}9.67mmhg$ Each. Consequently, Error Rates Were Compensated Especially In Diastolic Pressure Using $Si_{dvp}$, Various Slopes From Digital Volume Pulse And Map To Systolic-$1.91{\pm}7.57mmhg$ And Diastolic $0.05{\pm}7.49mmhg$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.395-400
• /
• 2017

The paper discussed the air-to-fuel ratio control of automotive fuel-injection systems using the cerebellar model articulation controller(CMAC) neural network. Because of the internal combustion engines and fuel-injection's dynamics is extremely nonlinear, it leads to the discontinuous of the fuel-injection and the traditional method of control based on table look up has the question of control accuracy low. The advantages about CMAC neural network are distributed storage information, parallel processing information, self-organizing and self-educated function. The unique structure of CMAC neural network and the processing method lets it have extensive application. In addition, by analyzing the output characteristics of oxygen sensor, calculating the rate of fuel-injection to maintain the air-to-fuel ratio. The CMAC may easily compensate for time delay. Experimental results proved that the way is more good than traditional for petrol control and the CMAC fuel-injection controller can keep ideal mixing ratio (A/F) for engine at any working conditions. The performance of power and economy is evidently improved.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.31-43
• /
• 2004

Voice over Internet Protocol (VoIP) is currently a popular research topic as a real time voice packet transmission method. But current Internet environment do not guarantee the quality of voice when we take a side view of delay, jitter and loss. Up to now, many voice based evaluation algorithms have been used to measure speech quality of VoIP systems. However, these algorithms have the defects that their results are different according to voice samples and some algorithms can not take network environment for speech transmission path. The E-model can be used to solve the problems of these algorithms. In this paper. we introduce VoIP planning guidelines through the various analysis of E-model which can model impairments of network quality as well as VoIP equipment quality systematically, We, also, show the evaluation method and results of speech transmission quality.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.1-7
• /
• 2021

In this paper, optimized media data retrieval and transmission based on the Hybrid CDN/P2P architecture and selective storage through user's prediction of requestability enable seamless data transfer to users and reduction of unnecessary traffic. We also propose a new media management method to minimize the possibility of transmission delay and packet loss so that media can be utilized in real time. To this end, we construct each media into logical segments, continuously compute weights for each segment, and determine whether to store segment data based on the calculated weights. We also designate scattered computing nodes on the network as local groups by distance and ensure that storage space is efficiently shared and utilized within those groups. Experiments conducted to verify the efficiency of the proposed technique have shown that the proposed method yields a relatively good performance evaluation compared to the existing methods, which can enable both initial latency reduction and seamless transmission.