• Journal of the Semiconductor & Display Technology
• /
• v.12 no.1
• /
• pp.35-39
• /
• 2013

H.264/AVC is an authoritative international video coding standard which shows code and efficiency more improved than the existing video standards. Above all, the parameter block mode of H.264/AVC significantly contributes much to high compression efficiency. However, as the occasion demands, users tend to pass while overlooking the part that can produce a little higher compression efficiency. We, taking notice of this point, are designed to bring in much higher compression efficiency by gathering up the overlooked parts. This paper suggests the algorithm that produces efficient performance improvement by using the histogram of luminance in the pixel unit (Macroblock) of respective prediction block and applying specific thresholds. The experimental results proves that the technique proposed by this paper increases the compression efficiency of the existing H.264/AVC algorithm by 0.4% without any increase in the whole encoding time and PSNR complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1028-1040
• /
• 2000

Since image data has large data amount, proper image compression is necessary to transmit and store the data efficiently. Image compression brings about bit rate reduction but results in some artifacts. This artifacts are blocking artifacts, mosquito noise, which are observed in DCT based compression image, and ringing artifacts, which is perceived around the edges in wavelet based compression image. In this paper, we propose directional postprocessing technique which improved the decoded image quality using the fact that human vision is sensible to ringing artifacts around the edges of image. First we detect the edge direction in each block. Next we perform directional postprocessing according to detected edge direction. Proposed method is that the edge direction is block. Next performed directional postprocessing according to detected edge direction. If the correlation coefficients are equivalent to each directions, postprocessing is not performed. So, time of the postproces ing brings about shorten.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.163-165
• /
• 2010

A trend in 3D mesh compression is codec design with low computational complexity which preserves the input vertex and face order. However, this added information increases the complexity. We present a fast 3D mesh compression method that compresses the redundant shared vertex information between neighboring faces using simple first-order differential coding followed by fast entropy coding with a fixed length prefix. Our algorithm is feasible for low complexity designs and maintains the order, which is now part of the MPEG-4 scalable complexity 3D mesh compression standard. The proposed algorithm is 30 times faster than MPEG-4 3D mesh coding extension.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.44-52
• /
• 2002

The mechanism of pullout resistance of compression anchor is analysed. This anchor is developed through the field pullout tests and the laboratory element test. The compression anchor is characterized by decrease of progressive failure, simple site work, economy and durability compared with tension anchor. The characteristics of compression anchor, compared with tension anchor. mainly are summarized as follows ; (1) The plastic displacement of anchor body is very small during pullout of anchor. (2) Total anchor length decreases by the shortening of free length; (3) The progressive failure is decreased.; (4) The safety factor for pullout resistance increases with time after construction of anchor.

• Journal of Information Technology Applications and Management
• /
• v.10 no.4
• /
• pp.159-168
• /
• 2003

This paper is concerned with the compression of EEG signals using wavelet-packet based techniques. EEG data compression is desirable for a number of reasons. Primarily it decreases for transmission time, archival storage space, and in portable systems, it decreases memory requirements or increases channels and bandwidth. Upon wavelet decomposition, inherent redundancies in the signal can be removed through thresholding to achieve data compression. We proposed the energy cumulative function for deciding of the threshold value and it works very innovative of EEG data.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2961-2966
• /
• 2007

When the pressure at the weak spot established at a certain part of a high pressure vessel or piping system exceeds a design pressure, this weak spot is burst, and the pressurized gas emitted through the weak spot will cause a compression wave system. In this connection, in the present study, an experimental study by using a conventional shock tube facility is performed to estimate the effects of the material of diaphragm, curvature radius and thickness of materials on the valve opening time in diaphragm. Pressure sensor having 500kHz in natural frequency is installed at 35mm downstream of the rupture diaphragm to measure the static pressure history of propagating and being accumulated compression wave. 4 kinds of materials are used as diaphragm that is aluminium, copper, stainless steel and zinc. The diaphragm radii of curvature R are ${\infty}$, 120mm and 60, respectively. And the depth for $90^{\circ}$ groove is 0.04mm. It is found that the smaller the tensile strength and elongation of the rupture diaphragm is, the smaller the radius of curvature of the rupture diaphragm is, and for the same conditions the thinner the thickness of the rupture diaphragm is, the shorter the valve opening time becomes. Also, the tensile strength, elongation and the radius of curvature of the rupture diaphragm for the same conditions are smaller, the maximum pressure rise caused by the coalescences of the compression wave is smaller. Finally the pressure ratio is higher, the valve opening time is shortened and gradient of pressure increment is more steepen.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.345-354
• /
• 2004

In these days, such services are popularized as E-commerce, E-government, multimedia services, and home networking applications. Most web traffics generated contemporarily basically use the Hyper Text Transfer Protocol(HTTP). Unfortunately, the HTTP is improper for these applications that comprise significant components of the web traffics. In this paper, we introduce a real-time contents compression architecture that maximizes the web service performance as well as reduces the response time. This architecture is built into the linux kernel-based web accelerating module. It guarantees not only the freshness of compressed contents but also the minimum time delay using an server-state adaptive algorithm, which can determine whether the server sends the compressed message considering the consumption of server resources when heavy requests reach the web server Also, We minimize the CPU overhead of the web server by exclusively implementing the compression kernel-thread. The testing results validates that this architecture saves the bandwidth of the web server and that elapsed time improvement is dramatic.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.781-786
• /
• 2004

In these days, such services are popularized as E-commerce, E- government, multimedia services, and home networking applications. Most web traffics generated contemporarily basically use the Hyper Text Transfer Protocol(HTTP). Unfortunately, the HTTP is improper for these applications that comprise significant components of the web traffics. In this paper, we introduce a real-time contents compression architecture that maximizes the web service performance as well as reduces the response time. This architecture is built into the linux kernel-based web accelerating module. It guarantees not only the freshness of compressed contents but also the minimum time delay using an server-state adaptive algorithm, which can determine whether the server sends the compressed message considering the consumption of sewer resources when heavy requests reach the web server. Also, We minimize the CPU overhead of the web server by exclusively implementing the compression kernel-thread. The testing results validates that this architecture saves the bandwidth of the web server and that elapsed time improvement is dramatic.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.51-57
• /
• 2012

Purpose: The compression strength of corrugated fiberboard containers used to package agricultural products rapidly decreases owing to various environmental factors encountered during the distribution of unitized products. The main factors affecting compression strength are moisture absorption, long-term top load, and fatigue caused by shock and vibration during transport. This study characterized the durability of corrugated fiberboard containers for packaging fruits and vegetables under simulated transportation conditions. Methods: Compression tests were done after corrugated fiberboard containers containing fruit were vibrated by an electro-dynamic vibration test system using the power spectral density of routes typically traveled to transport fruits and vegetables in South Korea. Results: To predict loss of compression strength owing to vibration fatigue, a multiple nonlinear regression equation ($r^2=0.9217$, $RMSE=0.6347$) was developed using three independent variables of initial container compression strength, namely top stacked weight, loading weight, and vibration time. To test the applicability of our model, we compared our experimental results with those obtained during a road test in which peaches were transported in corrugated containers. Conclusions: The comparison revealed a highly significant ($p{\leq}0.05$) relationship between the experimental and road-test results.

• Journal of Biosystems Engineering
• /
• v.31 no.4 s.117
• /
• pp.369-375
• /
• 2006

Mechanical properties of potato and sweet potato were measured under impact and compression loading. The test apparatus consisted of disgital storage oscilloscope and simple mechanisms which can apply compression and impact forces to potatoes and sweet potatoes. The mechanical properties could be measured while the tissues were ruptured in a very short period time less than 10 ms by impact loading. Rupture force, energy, and deformation were measured as mechanical properties of potatoes and sweet potatoes under impact and compression loading. Rupture forces under impact and compression loading were in the range of 84.1 to 93.7N and 128.9 to 132.2N for external tissues and 60.1 to 64.8N and 158.9 to 171.1N for internal tissues of potato and sweet potato, respectively. Compression speeds and drop heights for each test were in the range of 1.25 to 62.5mm/min and 8 to 24cm.