• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.322-322
• /
• 2016

Phase change memory (PCM) has attracted much attention as one of the most promising candidates for next-generation nonvolatile memory. In that regard, the purposes of the study are to propose reference of effective pulse parameter to control phase switching operation and to invest the effect of nitrogen doped in PCM materials for improved cycling stability and economic energy consumption. Switching operation of PCM is affected by electric pulse parameter and as shown in figure.1 are composed to RT(rising time), ST(setting time), FT(falling time) and the effect of these parameter was precisely investigated. Transmission electron microscope (TEM) was used to confirm fine structure and retention cycle test was conducted to confirm reliability. Finally improvement reliability and economic power consumption in quantitatively are obtainable by optimum pulse parameter and nitrogen doping in GST material. these study is related to the engineering background of other semiconductor industries and it have confirmed to possibility further applications.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.62-65
• /
• 2006

In this paper, nonlinear nonplanar vibration of a flexible rectangular cantilever beam is analyzed when one-to-one resonance occurs to the beam. The planar and nonplanar motions of the beam are analyzed in time and frequency domains. In frequency domain, FFT analyzer is used to perform autospectrum and cepstrum analyses for nonlinear response of the beam. In time domain, an oscilloscope is used to investigate the phase difference between the planar and nonplanar motions and to perform Torus analysis in the phase space. Through those analyzing process, the main frequencies of superharmonic, subharmonic, and super-subharmonic motions are investigated in the nonplanar motion due to one-to-one resonance. Analyzing the phase difference between the planar and nonplanar motions, it is observed that the phase difference varies in time.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.5
• /
• pp.501-506
• /
• 2013

A hold-up time compensation circuit is proposed to get high efficiency of the front-end phase-shifted full bridge DC/DC converter. The proposed circuit can make the phase-shifted full bridge front-end DC/DC converter built with 0.5 duty ratio so that the conduction loss of the primary side and voltage stress across rectifier in the secondary side are reduced and the higher efficiency can be obtained. Furthermore, the requirement of an output filter significantly can diminish due to the perfect filtered waveform. A 12V/100A prototype has been made and experimental results are given to verify the theoretic analysis and detailed features.

• Journal of Korea Foundry Society
• /
• v.30 no.3
• /
• pp.100-110
• /
• 2010

The solidification sequence and formation of intermetallic phase of Fe-rich Al-Si-Cu alloy were investigated by using real-time imaging of synchrotron X-ray radiation. Effects of cooling rate during uni-directional solidification on the resultant solidification behavior was also studied in a specially constructed vacuum chamber in the SPring-8 facility. The series of radiographic images were complementarily analyzed with conventional analysis of OM and SEM/EDX for phase identification. Detailed solidification sequence and formation mechanisms of various phases were discussed based on real-time image analysis. The growth rates of $\alpha$-AlFeMnSi and ${\beta}-Al_5FeSi$ were measured in order to understand the growth behavior of each phase. It is suggested that real-time imaging technique can be a powerful tool for the precise understanding of solidification behavior of various industrial materials.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.905-917
• /
• 1999

멀티미디어 시스템에서 수행되는 부하 중 상당 부분은 정해진 시간에 주기적으로 수행되어 연속 매체(continuous media)를 처리하는 주기 태스크들이다. 연속 매체들을 처리하는 두 주기 태스크의 수행 요청 시간(release time)간에 인공적인 위상(phase)을 줄 경우, 전체 부하의 처리 타이밍에 영향을 주게 되며, 특히, 적절한 위상을 부여할 경우 부하가 고르게 분산된다. 부하의 고른 분산은 태스크 간섭을 줄여 지터(jitter), 종료시한 초과(deadline miss), 그리고 긴 응답 시간(response time) 등의 문제를 해소시킨다. 본 논문에서는 새로운 위상 스케줄링(phased scheduling) 알고리즘 및 알고리즘을 개발하고 평가할 수 있는 실험 환경을 제안한다. 본 논문에 제시된 알고리즘은 저자들의 선행 논문 1 에서 제시한 알고리즘의 대안이다. 새로운 알고리즘은 정확하게 최적의 위상을 찾지는 않으나 기존 알고리즘보다 빠르게 수행되며 적용 범위가 넓다.Abstract A multimedia system consists of substantial amount of continuous media workload scheduled periodically at deterministic time points. Artificial phase between the invocation times of any two continuous media tasks affects the timing of the entire workload. A proper phase configuration distributes workload uniformly over time and reduces task interference that may otherwise result in jitter, deadline miss, and long response time. The objective of this paper is to work out a phased scheduling algorithm and to evaluate its effectiveness. The algorithm in this paper is an alternative approach to our previous work 1 . It is almost as accurate as the predecessor but two of three times faster in identifying the appropriate phase vector.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.377-382
• /
• 1994

In the conventional Fourier imaging method in MRI (Magnetic Resonance Imaging), intramotion such as pulsatile flow makes zipper-like artifact along the phase encoding direction. On the other hand, line-integral projection reconstruction (LPR) method has advantages such as imaging of short T2, object and reduction of the flow artifact by elimination of the flow-induced phase fluctuation. The LPR, however, necessarily requires time consuming filtering and back-projection processes, so that the reconstruction takes long time. To overcome the long reconstruction time of the LPR and to obtain the flow artifact reduction effect, we adopted phase corrected concentric square raster sampling (CSRS) method and improved its imaging performance. The CSRS is a fast reconstruction method which has the same properties with the LPR. In this paper, we proposed a new method of flow artifact reduction using the CSRS method. Through computer simulations and experiments, we verified that the proposed method can eliminate phase fluctuations, thereby reducing the flow artifact and re- markably shorten the reconstruction time which required long time in the LPR.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.200-206
• /
• 2016

This study was carried out to investigate the effect of W substitution on the precipitation behavior of ${\chi}$ and ${\sigma}$ phases in super duplex stainless steel. The ${\chi}$ phase was precipitated at the interface of ferrite / austenite phases and inside the ferrite phase at the initial stage of aging. With an increase in the aging time, the volume fraction of the ${\chi}$ phase increased, and then decreased with the transformation from the ${\chi}$ phase to the ${\sigma}$ phase. The ${\sigma}$ phase was precipitated later than the ${\chi}$ phase, and the volume fraction of x phase increased with the increase in the aging time. The ferrite phase was decomposed into the new austenite (${\gamma}2$) and ${\sigma}$ phases by aging treatment. The decomposition of the ferrite phase into the ${\gamma}2$ and ${\sigma}$ phases was retarded by W substitution for Mo. The volume fraction of the ${\chi}$ phase increased and that of the ${\sigma}$ phase decreased due to W substitution. The ${\chi}$ and ${\sigma}$ phases were intermetallic compounds, which had lower nickel concentration, and higher chromium, molybdenum, and tungsten concentrations. The ${\chi}$ phase has higher molybdenum and tungsten concentrations than those of the ${\sigma}$ phase. The amounts of chromium and nickel in the ${\chi}$ and ${\sigma}$ phases did not change, but these phases have higher concentrations of molybdenum and tungsten due to W substitution for Mo.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.3
• /
• pp.6-12
• /
• 1984

The basic binary quantized first-order digital phase locked loop (DPLL) is modified in order to reduce the aquisition time and steadyftate phase error. Adding the loop that corrects the phase difference by detecting the falling zero-crossing time, an effort for the improving the performance is performed and the performance compared with that of the basic DPLL. Using a graphical method, the phase locking processes of the modified DPLL for a phase step and a frequency step input are depicted visually in the absence of noise. The performance of the modified DPLL for a sinusoidal input added narrow band random noise is evaluated using the Chapman-Kolmogorov equation. This approach is verified by direct computer simulation. The steady-state phase error and the average aquisition time of the modified DPLL are compared with those of the basic DPLL, It is shown that the aquisition time of the modified DPLL is shortened about twice, also, as signal to noise ratio increases, the effect of the modification increases and the steady-state phase error approaches to zero.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.99-116
• /
• 2003

The purpose of this study was to kinematics factors on during round-off at end of beam-salto backward stretched with step-out to cross on balance beam. Four elite female gymnastics players participated as subject of this study. The methods of this study was analyzed using three dimentional analysis. The results and conclusion of this paper is obtained as follows ; 1. The phase of time was the most short time in board touch down phase and board take-off phase. Also, it was shown a more long time in total time compared to previous study. 2. The horizontal displacement of each phase was shown the most high levels in balance beam landing. The vertical displacement was display a non-linearity increase in board take-of phase, and it was shown the most high levels in vertical displacement during landing of balance beam. 3. The horizontal velocity of each phase was shown the most high levels in board touch down, and it was display a gradually decreased levels because flight during board take-of. The resultant velocity of CG on each phase was shown the most high levels in board touch down and board take-off. 4. The angle of hip joint was shown the most high levels as performed a motion in extension state during board take-off, and the angle of knee joint was display a increased levels because of flight cause body extension in board take-off. Also the angle of ankle joint was shown a increasing levels during board take-off. Considering to this results, it is suggest that the change of kinematics factors in board touch down and board take-off is key role on the effective board control.