• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.516-517
• /
• 2015

This paper proposes the feedforward compensation method of output voltage with 3phase AC/DC PWM converter on DC distribution system for improved response. AC/DC PWM converter on DC distribution is required power supply of high quality because of renewable energy sources and load links. In general, Feedforward compensation method of 3phase AC/DC PWM converter receives the sensor input to the output current, load power. Resulting, error of the sensing values and communication cause time delay. Therefore, Feedforward compensation method through only the output voltage is proposed in this paper. The feedforward compensation method through only the output voltage can be applied to the two-level AC/DC PWM converters, as well as multi-level converter or inverter.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.22 no.3
• /
• pp.173-188
• /
• 2011

This research intended to identify empirical recommendations for designing the DAISY service interface and used a case-based method. The case of this research was LG Digital Talking Book Library(http://voice.lg.or.kr) of LG Sangnam Library. A group of experts evaluated the current DAISY interface serviced by the web. After evaluation, major recommendations were suggested and these recommendations were used to develop the new DAISY Interface. Major recommendations were consideration of the reading flow of the screen-reader program, prevention of perception as an error about the time delay, development of web-based software, support for convenient functions and prevention of shortcut key overlap and so on.

• Journal of Korea Game Society
• /
• v.19 no.1
• /
• pp.73-84
• /
• 2019

This study is intended to suggest ways to improve the quality of the service of subtitles provided for the convenience of viewing for deaf people on e-sports broadcast content and game streamer content. Generally, subtitling files of broadcast content are manually written on air by stenographers, so a delay of 3 to 5 seconds is inevitable compared to the original content. Therefore, the present study proposed the formation of an automatic synchronization calibration system using speech recognition technology. In addition, a content application experiment using this system was conducted, and the final result confirmed that the time of synchronization error of subtitling data could be reduced to less than 1 second.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.97-102
• /
• 2007

In this paper, a new architecture for fast-serial $GF(2^m)$ multiplier with low hardware complexity is proposed. The fast-serial multiplier operates standard basis of $GF(2^m)$ and is faster than bit serial ones but with lower area complexity than bit parallel ones. The most significant feature of the fast-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But The traditional fast-serial architecture needs extra (t-1)m registers for achieving the t times speed. In this paper a new fast-serial multiplier without increasing the number of registers is presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.119-126
• /
• 2009

In this paper propose a method to reduce data for collision resolution. It is to reduce a damage of the back off algorithm to apply in both wire and wireless networks. Double back off size can be work in the first and the last movement point service as a same time in IEEE 802.16. It propose of the algorithm to be suited to IEEE 802.16 for increasing network access percentage in increase a data treat, delay error range and random access over fuller condition. In the result of the computer simulation, the proposal algorism give a increasing speed more than under the this paper. From this computer simulation result, we can get the confirmation of the small loss in saturated and saturated could be a longer in last network.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.342-349
• /
• 2008

Multipath makes clear message transfer difficult in the underwater communication. To solve this problem, we propose a new method producing proper MFSP (Modulation Frequency Shift Period) which could be obtained by calculating time delay caused by different path from a transmitter to a receiver. At the transmitter end, messages were divided according to the size of the MFSP and transmitted accordingly alternating Frequency. At the receiver end, the received messages were demodulated in order to recover the original message by the adaptive BISMO algorithm which is constructed at the algorithm design stage. Adaptive MFSP and estimated BER (Bit Error Rate) were calculated through simulation test.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.213-221
• /
• 2006

Phone segmentation of speech waveform is especially important for concatenative text to speech synthesis which uses segmented corpora for the construction of synthetic units. because the quality of synthesized speech depends critically on the accuracy of the segmentation. In the beginning. the phone segmentation was manually performed. but it brings the huge effort and the large time delay. HMM-based approaches adopted from automatic speech recognition are most widely used for automatic segmentation in speech synthesis, providing a consistent and accurate phone labeling scheme. Even the HMM-based approach has been successful, it may locate a phone boundary at a different position than expected. In this paper. we categorized adjacent phoneme pairs and analyzed the mismatches between hand-labeled transcriptions and HMM-based labels. Then we described the dominant error patterns that must be improved for the speech synthesis. For the experiment. hand labeled standard Korean speech DB from ETRI was used as a reference DB. Time difference larger than 20ms between hand-labeled phoneme boundary and auto-aligned boundary is treated as an automatic segmentation error. Our experimental results from female speaker revealed that plosive-vowel, affricate-vowel and vowel-liquid pairs showed high accuracies, 99%, 99.5% and 99% respectively. But stop-nasal, stop-liquid and nasal-liquid pairs showed very low accuracies, 45%, 50% and 55%. And these from male speaker revealed similar tendency.

• Journal of the Korea Society for Simulation
• /
• v.24 no.2
• /
• pp.31-39
• /
• 2015

Unemployment is related to social issues as well as personal economics activity so various policies have been made to reduce the unemployment rate in many countries. Because of delay inherent in the survey mechanism to collect unemployment data, it takes lots of time to acquire survey unemployment data. To develop proper policies for reducing unemployment rate at the right time, it is quite critical to obtain faster and more accurate information concerning about unemployment level. To remedy this problem, recently an advanced analytics utilizing internet queries is suggested. To examine the potential of Web query information, this research investigates the usefulness of internet activity data to predict Korean unemployment rate. One of selected web-query data(unemployment claim) has a quite strong correlation with unemployment rate. This research employes a time series approach of the ARIMA model that utilizes the information of keyword queries provided by the Naver(Korean representative portal site) trend together with unemployment rate data provisioned from Statistics Korea. With respect to model selection guidelines of mean squared error and prediction error, the model with utilizing the web query information shows better results than the model without such information. This suggests that there is a strong potential for the used method, which needs to be further explored.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.