• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.374-381
• /
• 1995

For designing radio communication systems, radio-channel effects must be considered in order to obtain the desired communication quality, transmitting power, transmission speed and bit error rate. In radio channel, one of major factors that degrade communication quality is multipath fading between transmitting and receiving points. Therefore, a channel model which can describe fading effects correctly is requested. This paper deals with the composition of the channel simulator model that describes multipath fading effects and delay times which occur in the channel. For the performance analysis of the proposed model, trandmitting signal is used in the simulation. From simulation results, it can be shown that probability density function. level crossing rates and average fading-duration time distribution of the faded receive signal are very similar with theoretic values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.892-900
• /
• 1994

Recently, ITU-TSS recommends a service specific connection oriented protocol (SSCOP) which assures the successful transmission of signalling information for B-ISDN. In the SSCOP, there is a mechanism to exchange periodically status informations for both error and flow controls. In this paper, we analyze the SSCOP with a discrete-time queueing model. We consider two cases for link-by-link and end-to-end controls. As the performance measures, we investigate delay, throughput, and buffer size of the receiver. The average values of these measures are analyzed with respect to the loss probability of messages, the traffic load, and the exchange period of status information. We also verify the accuracy of this model with simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.659-667
• /
• 2002

In this dissertation, in the Turbo Code used for error correction coding of the recent digital communication systems, we propose a new S-R interleaver that has the better performance than the existing block interleaver, and the Turbo Decoder that has the parallel concatenated New structure using the MAP algorithm. For real-time voice and video services over the third generation mobile communications, the performance of two proposed methods is analyzed by the reduced decoding delay using the variable decoding method by computer simulation over multipath channels of DS-CDMA system. Also, a Modified NCMA based on conventional NCMA is proposed to improve the channel efficiency in the mobile communication system, and is investigated over the multi-user environment of DS-CDMA system through computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.337-342
• /
• 2010

In this paper, a new architecture for digit-parallel/bit-serial GF($2^m$) multiplier with low complexity is proposed. The proposed multiplier operates in polynomial basis of GF($2^m$) and produces multiplication results at a rate of one per D clock cycles, where D is the selected digit size. The digit-parallel/bit-serial multiplier is faster than bit-serial ones but with lower area complexity than bit-parallel ones. The most significant feature of the digit-parallel/bit-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But the traditional digit-parallel/bit-serial multiplier needs extra hardware for high speed. In this paper a new low complexity efficient digit-parallel/bit-serial multiplier is presented.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.113-122
• /
• 2007

Recently, the strategy of the age of limitless competition for existence of manufacturing company appears for the enhancement of productivity through the automatic system, the reduction for the cost for standardization and the decision making process for the information system. Especially the critical success factors in manufacturing company can be summarized for the establishment of production visibility through the production management, material & work-in-process management, the establish of the flexible manufacturing system for the changed order priority and the establish of the quality system for improvement of product and process quality. The existing production management systems supply only simple information about production results on real time, can delay quick decision making. And it can prevent acquiring the information about various customer needs and the communication problems with other systems. In this paper, it will show MES system, a solution for the problems of existing production management systems. And through a case study of D company, it will reveal improvement effect on shipment error using MES system and economic analysis for MES itself.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.415-419
• /
• 2010

A variety of methods for sound source localization have been developed and applied to several applications such as noise detection system, surveillance system, teleconference system, robot auditory system and so on. In the previous work, we proposed the sound source localization using the spatially mapped GCC functions based on TDOA for robot auditory system. Performance of the proposed one for the noise effect and estimation resolution was verified with the real environmental experiment under the single source assumption. However, since multi-talker case is general in human-robot interaction, multiple source localization approaches are necessary. In this paper, the proposed localization method under the single source assumption is modified to be suitable for multiple source localization. When there are two sources which are correlated, the spatially mapped GCC function for localization has three peaks at the real source locations and imaginary source location. However if two sources are uncorrelated, that has only two peaks at the real source positions. Using these characteristics, we modify the proposed localization method for the multiple source cases. Experiments with human speeches in the real environment are carried out to evaluate the performance of the proposed method for multiple source localization. In the experiments, mean value of estimation error is about $1.4^{\circ}$ and percentage of multiple source localization is about 62% on average.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.417-421
• /
• 2005

In the recent digital communication systems, the performance of Turbo Code using the error correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the turbo decoder. However, performance depends on the interleaver depth that needs many delays over the reception process. Moreover, turbo code has been known as the robust coding methods with the confidence over the fading channel. International Telecommunication Union(ITU) has recently adopted it as the standardization of the channel coding over the third generation mobile communications(IMT-2000). Therefore, in this paper, we proposed the interleaver that has the better performance than existing block interleaver, and modified turbo decoder that has the parallel concatenated structure using MAP algorithm. In the real-time voice and video service over third generation mobile communications, the performance of the proposed two methods was analyzed and compared with the existing methods by computer simulation in terms of reduced decoding delay using the variable decoding method over AWGN and fading channels for CDMA environments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.131-136
• /
• 2006

Commercial uses of GPS have been growing rapidly with applications for aircraft, ship, and land vehicle navigation as well as for surveying and time keeping. The next generation GPS and Japanese QZS (Quasi Zenith Satellite) will provide three different civil signals. Galileo will also provide several types of civil signals. The availability of the third civil frequency has obvious advantages to instantaneous carrier phase accuracy and ambiguity resolution for centimeter level measurements. This paper discusses the effects of additional new civil signals for the high accuracy positioning in urban areas based on simulation using practical raw data. As for constellation, only GPS and GPS+QZS are considered. For positioning, a short distance baseline is assumed in order to disregard atmosphere effects. In this simulation, mask angle and signal conditions were fixed and ambiguity success rates were compared between different triple frequency combination scenarios. The coefficient of reflection was set randomly from 0.05 to 0.5 and the multipath delay was also set randomly from 5-100 m. Visible satellites and signal strength were determined by raw data collected in Tokyo by car. These simulation results have confirmed that the availability of high accuracy positioning will increase in all scenarios if we use GPS+QZS with triple frequencies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1891-1898
• /
• 2013

To efficiently execute 3D graphic APIs, such as OpenGL and Direct3D, special purpose arithmetic unit(SFU) which supports floating-point sine, cosine, reciprocal, inverse square root, base-two exponential, and logarithmic operations is designed. The SFU uses second order minimax approximation method and lookup table method to satisfy both error less than 2 ulp(unit in the last place) and high speed operation. The designed circuit has about 2.3-ns delay time under 65nm CMOS standard cell library and consists of about 23,300 gates. Due to its maximum performance of 400 MFLOPS and high accuracy, it can be efficiently applicable to mobile 3D graphics application.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.898-904
• /
• 2017

DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.