• 한국음향학회지
• /
• 제16권3호
• /
• pp.99-105
• /
• 1997

이 논문에서는 다중경로 환경하에서 DLL (Delay lock loop)의 동작을 분석하였다. 전체 동작상태는 정상상태 시간오차 확률밀도함수와 MTLL (mean-time-to-lose-lock) 을 이용하여 분석하였다. 그리고 다중경로에서 페이딩 환경에서 지연성분의 존재로 진상-지상 판별함수 S(${\epsilon}$)가 0이 되는 추적 오차점 ${\epsilon}_{0}$가 0이 아님을 보이고, 지연성분의 전력 $g_{2}$, 지연시간 ${\tau}_{d}$의 증가로 인하여 ${\epsilon}_{0}$의 절대값이 증가하며, MTLL의 값이 작아짐을 보였다. 여기에서는 위의 변수들을 이용하여 다중경로 페이딩 환경에서의 시간오차 확률밀도함수와 MTLL을 선형적으로 구하였으며, 다중경로의 영향이 클 경우에는 MTLL은 상당히 낮아짐을 보이고, 이때 진상-지상 오프셋 ${\Delta}$의 증가시킴으로써 MTLL의 값을 증가시킬 수 있다는 것을 관찰하였다. 우리는 먼저 S(${\epsilon}$)가 0이 되는 추적오차점 ${\epsilon}_{0}$을 구하고, 이를 이용하여 진상-지상 판별함수 S(${\epsilon}$)를 선형 근사화시켰으며, 진상-지상 오프셋 ${\Delta}$의 증가에 따른 시간오차 확률밀도함수와 MTLL을 구하고 DDLL의 동작상태를 연구하여, 다중경로의 지연성분에 대한 전력 및 지연시간에 따라 MTLL이 상당히 낮게 되며, 이러한 경우 진상-지상 오프셋 ${\Delta}$을 증가시켜줌으로써 MTLL을 충분히 증가시키고 DLL의 성능을 개선할 수 있다는 결과를 얻었다.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.51-60
• /
• 2005

This paper describes a robust control scheme for high-speed and long stroke scanning motion of high precision linear motor system consisting of linear motor, air bearing guide and position measurement system using heterodyne interferometer. Nowadays, semiconductor process and inspection of wafer or LCD need high speed and long travel length for their high throughput and extremely small velocity fluctuations or tracking errors. In order to satisfy these conditions, linear motor system are widely used because they have large thrust force and do not need motion conversion mechanisms such as ball screw, rack & pinion or capstan with which the system are burdened. However linear motors have a problem called force ripple. Force ripple deteriorates the tracking performances and makes periodic position errors. So, force ripple must be compensated. To maximize the tracking performance of linear motor system, we propose the control scheme which is composed of a robust control method, Time Delay Controller (TDC) and a feedforward control method, Zero Phase Error Tracking Control (ZPETC) for accurate tracking a given trajectory and an adaptive force ripple compensation (AFC) algorithm fur estimating and compensating force ripple. The adaptive ripple compensation is continuously refined on the basis of tracking error. Computer simulation results based on modeled parameters verify the effectiveness of the proposed control scheme for high-speed, long stroke and high precision scanning motion and show that the proposed control scheme can achieve a sup error tracking performance in comparison to conventional TDC control.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2822-2831
• /
• 1997

ATM을 기반으로 하는 B-ISDN 망은 다양한 트래픽 특성과 서비스 요구사항을 가진 여러가지 종류의 서비스를 지원해야한다. ATM 계층에는 link 계층간의 흐름 제어나 에러 제어가 없다. 그러나 다양한 종류의 각종 서비스를 위해 각기 다른 다른 흐름／에러 제어 기법이 AAL 계층이나 상위 계층(예를 들어 OSI 7 계층의 4번 전송 계층)에서 수행될 수 있다. 전통적인 데이타망에서는 에러 제어 기법이 결합된 윈도우 흐름 제어 기법이 널리 사용되었다. 그러나 윈도우 흐름 제어 기법은 전파 전달 지연(Propagation delay)이 전송률(Transmission rate)에 비해 상대적으로 너무 크기 때문에 ATM 망에서 유용하지 않을 수 있다. 본 논문에서는 양단간(end-to-end) 자료 전송을 위한 매우 간단한 흐름제어 기법인 RCT (Rate Control for end-to-end Transport)를 제안한다. RCT는 평균 과부하(Overload) 기간의 분포가 특정 시간대에 편중되어 있을 때에 높은 성능을 보인다．

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2731-2743
• /
• 1996

When modeling error is large of plant is time-varying, it is hard to obtain good robust performance and robust stability by conventional contorl methods. Here, we need to design a robust controller bearing modeling error. In this paper, based on recently developed Time Delay Control(TDC) and Disturbance Observer the output feedback Robust Disturbance Observer(RDO), which is easily combined with general linear control, is proposed. Proposed RDO is derived from extending the main idea of Disturbance Observer to multi-input multi-output linear system. RDO solves robust stability problem of Disturbance Observer and has the robust performance same as nominal performance. RDO controlled dual stage positioning system shows excellent robust performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 1995

The actuator's response delay, disturbance and measurement noise can often cause a significant error in the target tracking of an underwater vehicle. The first purpose of this paper is error analysis about motion of an underwater vehicle when the closed loop system has actuator and disturbance and noise. The underwater vehicle is simulated for cases of various disturbances. The second purpose is robust controller design for the underwater vehicle with parameter uncertainty. So, two robust control methods are applied for the underwater vehicle. One is standard $H_{\infty}$ control, and the other is time-varying sliding mode control with modified saturation function. Suboptimal design parameters for $H_{\infty}$ control, and design parameters for time-varying switching surfaces are provided Simulations for the two controllers are carried out and their performances are analyzed.lyzed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.65-68
• /
• 2003

3GPP's RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In 3GPP ARQ, distinctive windows are provide at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at reordering buffer, which results in a long reordering time. Aiming at suppressing the occupancy at reordering buffer, we propose a occupancy control scheme in this paper. In this scheme, a threshold is created in the receiving station's window and a data PDU out of the threshold (but within the window) is treated according to go back N ARQ. By the employment of the occupancy control scheme, the occupancy at the reordering buffer is apparently reduced, while the delay performance may be degraded due to the properties of go back N ARQ. We, thus, investigate the peak occupancy and mean delay performance by a simulation method. From numerical examples, we observe a trade-off in both performance measures and conclude that the peak occupancy is effectively reduced by setting a proper threshold under a constraint on mean delay performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.215-217
• /
• 2005

There are two types of packet loss probabilities used in both the network layer and the physical layer within the wireless transmitter such as a queueing discard probability and transmission loss probability. We analyze these loss performances in order to guarantee Quality of Service (QoS) which is the basic of the future network. The queuing loss probability is caused by a maximum allowable delay time and the transmission loss probability is caused by a wireless channel error. These two types of packet loss probabilities are not easily analyzed due to recursive feedback which, originates as a result at a queueing delay and a number of retransmission attempts. We consider a wireless transmitter to a M/D/1 queueing model. We configurate the model to have a finite-size FIFO buffer in order to analyze the real-time traffic streams. Then we present the approaches used for evaluating the loss probabilities of this M/D/1/K queueing model. To analyze the two types of probabilities which have mutual feedbacks with each other, we drive the solutions recursively. The validity and accuracy of the analysis are confirmed by the computer simulation. From the following solutions, we suggest a minimum of 'a Maximum Allowable Delay Time' for real-time traffic in order to initially guarantee the QoS. Finally, we analyze the required service rate for each type utilizing real-time traffic and we apply our valuable analysis to a N-user's wireless network in order to get the fundamental information (types of supportable real-type traffics, types of supportable QoS, supportable maximum number of users) for network design.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1984년도 추계학술발표회 논문집
• /
• pp.100-106
• /
• 1984

Traditional methods for estimating the location of underwater target, i.e. the triangulation method and the wavefront curvature method, have been utilized. The location of a target is defined by the range and the bearing, which estimates can be obtained by evaluating the time delay between neighboring sensors. Many components of error occur in estimating the target range, among which the error due to the fluctuation of heading angle is outstanding. In this paper, the wavefront curvature method was used. We considered the error due to the heading fluctuation as the $\beta$-density process, from which we analized the range estimates with $\beta$-density function exist in some finite limits, and its mean value and variation are depicted as a function of true range and heading fluctuation. Given heading angles and sensor separation, maximum estimated heading errors are presented as a function of true range.

• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.930-935
• /
• 2005

In this paper, position tracking control of an autonomous helicopter is presented. Combining an LQR method and a proportional control forms a simple PD control. Since LQR control gains are set for the velocity control of the helicopter, a position tracking error occurs. To minimize a position tracking error, neural network is introduced. Specially, in the frame of the reference compensation technique for teaming neural network compensator, a position tracking error of an autonomous helicopter can be compensated by neural network installed in the remotely located ground station. Considering time delay between an auto-helicopter and the ground station, simulation studies have been conducted. Simulation results show that the LQR with neural network performs better than that of LQR itself.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.654-656
• /
• 1998

This paper deal with the implementation of Active Noise Control (ANC) in a short duct. In case of ANC in the air duct, input microphone, control speaker, error microphone are used. But we can't use input microphone because of the characteristics of short duct. It is difficult to avoid howl. So we propose single-channel adaptive feedback ANC which is composed only error microphone and control speaker without input microphone. FXLMS algorithm is used to compensate for the time delay of the error path. Experimental results show that the controller reduce noise signal sufficiently.