• 펄프종이기술
• /
• 제48권3호
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.42-51
• /
• 2004

Wood veneer-bamboo zephyr composite board (WBCB) was manufactured to evaluate the properties of bamboo as alternative raw materials for the manufacture of composite panels. Bamboo zephyr was prepared using Moso bamboo (Phyllostachys pubesens Mazel. et Z), Giant timber bamboo (Phyllostachys bambusoides Sieb. et Zucc), and Hachiku bamboo (Phyllostachys nigra var. henosos Stapf). The effect of age and species of bamboo on zephyr production was investigated in terms of the pass number of bamboo split through the rollers, and the width increasing rate of bamboo split. Five-ply WBCBs were produced with Keruing veneers as face and back layers, leading to three layers of bamboo zephyr sheets as core layer. Each layer was placed so that its grain direction was at right angles to that of the adjacent layer and the layers were bonded together with phenol-formaldehyde (PF) resin.The pass number of bamboo split was increased with an increase of the thickness of culm wall. At the same thickness, Moso bamboo showed no effect of the age of bamboo on the pass number. The pass number of split of Giant timber bamboo was lower than that of Moso bamboo. No significant effect of bamboo species and age on the width of zephyr produced was observed. The width of zephyr obtained could be expressed as a function of diameter multiplied by thickness of culm wall. The physical and mechanical properties of WBCB manufactured in all given conditions did not show any significant differences, and they were above the requirement of Korean Standard (KS).

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.43-51
• /
• 2011

Chemical composition and contents of carbohydrates, lignin, and extractives in Moso(Phyllostachys pubescens Mazel), Henon(Phyllostachys nigra var. henonis Stapf ex. Rendle), and Timber bamboo(Phyllostachys bambusoides Sieb. et Zucc.) known as economically valuable bamboo species in Korea were analyzed as a function of ages. All of tested bamboo species were composed of fucose, arabinose, rhamnose, galactose, glucose, xylose, and mannose. Glucose was the sugar which showed the highest content followed by xylose. The contents of others were below 3%. Sugar contents of bamboo shoots showed the lowest among the tested bamboo samples, and the constant rates were shown after 50 days of growth. Lignin content increased by the growth of one year, and the increasing rates tended to be constant after the growth of three years. Bamboo shoots have the highest contents of acid-soluble lignin, which turned into insoluble lignin after the growth of 50 days. Bamboo shoots showed the highest content of extractives and tend to be decreased by the growth of 50 days and then the content increased slowly in proportion to the period of bamboo growth. No relationship was found between species and chemical composition of bamboo. However, there were significant difference in chemical composition between bamboo shoots and 50-day old bamboo.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.69-76
• /
• 2012

The bamboo fibers from three Korean bamboo species, Moso, Henon and Timber bamboo, were prepared by disintegration after thermal treatment. The samples were prepared according to the age of growth; bamboo shoots, 20 days and 50 days of growth. The fiber quality was also investigated by morphological and chemical analyses. There was no big difference in the dry mass of fibers among the three bamboo species. However, the dry mass of fibers from 50 days of growth was increased by 34%, whereas it was ranged in 9-20% in the case of fibers from bamboo shoots and 20 days of growth. In the results of morphological analysis, the fibers could be classified as the fibers from metaxylem, the fibers from parenchyma and the fines produced during disintegration. The fibers from 50 days of growth were separated from metaxylem, whereas the fibers from bamboo shoots and 20 days of growth were mainly consisted of fibers from metaxylem and parenchyma. The chemical analysis of fibers showed that the contents of carbohydrates, lignin and extractives were not much affected by thermal treatment.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.73-79
• /
• 2016

Hexeneuronic acid in soda-anthraquinone(AQ) pulps from Moso bamboo(Phyllostachys pubescebs), Timber bamboo(Phyllostachys bambusoides) and Henon bamboo(Phyllostachys nigra var. henonis) was investigated with mercuric chloride hydrolysis and UV spectroscopic quantification. Concentration of hexeneuronic acid in bamboo pulps was $36.6-45.4{\mu}mol/g$, which contributed to 3.1-3.9 value increase of kappa number. Lower concentration of 4-O-methylglucuronic acid in bamboo xylan contributed to lower hexeneruonic acid content in bamboo pulps than those of hardwood(yellow poplar or eucalyptus) but higher than softwood(red pine).

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.656-669
• /
• 2018

Tropical bamboo species, which have a very rapid growth rate, are considered as a promising non-timber forest product capable of exhibiting new functionality by carbonization technology. This study was conducted to compare the characteristics of carbonized bamboos from Andong (G. pseuudoarundinacea (Steudel) Widjaja), Hitam (G. atrovialacea), Tali (G. apus), Kuning (B. vulgaris Var. striata (Lodd. Ex Lindl)), and Ampel (B. vulgaris Scharad. ex Wendland), and Betung (D. asper). Each bamboo was carbonized at 200, 400, 600, 800, and $1,000^{\circ}C$, respectively, and their physical and anatomical characteristics were investigated. The result showed that the volume and weight of carbonized bamboo decreased with increasing carbonization temperature and showed the substantial changes of volume and weight between 200 and $400^{\circ}C$. The highest and the lowest density of carbonized samples were found in Ampel bamboo and Betung bamboo, respectively. The density of all carbonized bamboos tended to decrease after carbonization at 200 and $400^{\circ}C$ and relatively become constant afterwards. The carbonized bamboo prepared at 800 and $1,000^{\circ}C$ showed better refining degree. The results of the anatomical observation showed that the vascular diameter of carbonized bamboo decreased with increasing carbonization temperature, and the shrinkage in radial and tangential direction showed similar tendency. Statistical analysis showed that there was significant correlation between physical contraction and anatomical contraction. Based on the results of this study, comprehensive data about Indonesian bamboo charcoals could be obtained and it will be useful for future application studies.

• Journal of Forest and Environmental Science
• /
• 제24권3호
• /
• pp.151-154
• /
• 2008

Dramatic price increases of fossil fuels and the economic development of emerging nations accelerates the transformation of forest lands into monocultures, e.g. for biofuel production. On this account, cost efficient methods to enable the monitoring of land resources has become a vital ambition. The application of remote sensing techniques has become an integral part of forest attribute estimation and mapping. The aim of this study was to evaluate the potentials of the kNN method by combining terrestrial with remotely sensed data for the development of a pixel-based monitoring system for the small scaled mosaic of different land use types of the off-reserve forests of the Goaso forest district in Ghana, West Africa. For this reason, occurrence and distribution of land use types like cocoa and non-timber forest resources, such as bamboo and raphia palms, were estimated, applying the kNN method to ASTER satellite data. Averaged overall accuracies, ranging from 79% for plantain, to 83% for oil palms, were found for single-attribute classifications, whereas a multi-attribute approach showed overall accuracies of up to 70%. Values of k between 3 and 6 seem appropriate for mapping bamboo. Optimisation of spectral bands improves results considerably.

• 한국주거학회논문집
• /
• 제15권5호
• /
• pp.85-96
• /
• 2004

The purpose of this study was to (md out the characteristics of the residential house in Ulleung Island in terms of building materials, structure and construction method, structural design by actual field surveys. This study found several facts; First, the house was classified into the log house and mud-wall house according to building material for wall structure. The log house prevailed in the early days of the settlement in the island because of affulent timber materials available around. However, the mud wall house became a popular type in later days because of the depletion of timber materials. Second, the Udeki wall was an unique installation reflecting the severe climate conditions of Ulleung Island. However, many aspects of the Udeki wall was changed according to the change of living style and the introduction of modem heating systems in terms of its function, size, building material, layout position etc. Third, the roofing material also has been changed from materials available locally to slate materials transported from the mainland. Fourth, the bamboo slender-ribbed door as a single-swing door type was popular and later time the single-sliding door or three ribbed door was widely used in rooms installed later instead. Fifth, the roof was placed over the room, kitchen, and Chukdam (outer wall) and this was a resonable way to cope with heavy snowfalls in the winter season in Ulleung Island.

• Journal of Forest and Environmental Science
• /
• 제25권3호
• /
• pp.167-175
• /
• 2009

An exploratory study was conducted in Juri Forest Range-2, a proposed biodiversity conservation area of Bangladesh to explore the present growing stock of tree, regeneration condition and status of non-timber forest products (NTFPs). This conservation area contains both natural and artificial plantation was selected by using multistage random sampling method. For determination of plot size and sampling methods, the quadrate size ($10m{\times}10m$) for tree stock measurement, ($2m{\times}2m$) for regeneration survey, ($20m{\times}20m$) for NTFPs survey was determined. Regarding tree stock survey, 14 species under eight families were found where Tectona grandis shows average number of stem/ha was 624 and basal area/ha was (10.36 $m^2/ha$) followed by Acacia auriculiformis (0.2 $m^2/ha$ and 637 stem/ha), Gmelina arborea (0.2 $m^2/ha$ and 600 stem/ha). In regeneration survey, 14 species were found belonging to 9 families where Alstonia scholaris shows highest (3,750) seedling per hectare. Regarding NTFPs, bamboo and cane are the most common resources. In last ten years, the total timber output was 1,28,596.14 cubic feet and total amount of revenue was 4,64,434 US$. The vacant area is 1,335.5 acre which contains 14% of total area. If this vacant area is planted with suitable species and take proper steps for appropriate management of this species it will be a good biologically diversified area.