• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.41-51
• /
• 2012

Heliostat field is the most important subsystem in the tower type solar thermal power plant since its optical performance affects the total system efficiency most significantly while the construction cost of it is the major part of total construction cost in such a power plant. Thus a well designed heliostat field to maximize the optical efficiency as well as to minimize the land usage is very important. This work presents methodology, procedures and result of heliostat filed design for 200kW solar thermal power plant built recently in Daegu, Korea. A $2{\times}2(m)$ rectangular shaped receiver located at 43(m) high and tilted $28^{\circ}$ toward heliostat field, 450 of heliostats of which the reflective surface is formed by 4 of $1{\times}1(m)$ flat plate mirror facet, and the land area having about $140{\times}120(m)$ size are used to form the heliostat field. A procedure to deploy 450 heliostats in radial staggered nonblocking formation is developed. Also the procedures to compute the cosine effect, intercept ratio, blocking and shading ratio in the field are developed. Finally the heliostat filed is designed by finding the optimal radial distance and azimuthal spacing in radial staggered nonblocking formation such that the designed heliostat field optical efficiency could be maximized. The designed heliostat field has 77% of annual average optical efficiency, which is obtained by annually averaging the optical efficiencies computed between the time of where sun elevation angle becomes $10^{\circ}$ after sunrise and the time of where sun elevation angle becomes $10^{\circ}$ before sunset in each day.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.933-940
• /
• 2011

Thin sheets with a corrugated structure are generally used for the fabrication of heat exchangers for electronics, airplanes, and vehicles. However, it is difficult to fabricate corrugated structures, especially those with a bent angle, using the conventional stamping process because of its intrinsic formation mechanism. We propose a novel rubber-forming process for the effective pressing of the both tilted sides of a plate under the same pressure to form exact corrugated shapes. We use finite element analysis and experiments to study the rubber-forming process parameters, and we evaluate the maximum allowable bent angle for high-quality formation. We show that the proposed method is effective for the fabrication of bent plates with low cost.

• Journal of computational fluids engineering
• /
• v.18 no.4
• /
• pp.74-81
• /
• 2013

A numerical design analysis is conducted to search for an optimal shape of outlet in a rotating-disk CVD reactor. The goal is to suppress flow recirculation that has been found in a reactor having a sudden expansion of flow passage outside of the rotating disk. In order to streamline gas flow, the sidewall at which the flow in the Ekman layer is impinged, is tilted. The axisymmetric laminar flow and heat transfer in the reactor are simulated using the incompressible ideal gas model. For the conventional vertical sidewall, the flow recirculation forming in the corner region could be expanded into the interior to distort the upstream flow. The numerical results show that this unfavorable phenomenon inducing back flow could be dramatically suppressed by tilting the sidewall at a certain range of angle. The assessment of deviation in deposition rate based on the characteristic isotherm illustrates that the sidewall tilting may expand the domain of stable plug-like flow regime toward higher pressure. A physical interpretation is attempted to explain the mechanism to suppress flow recirculation.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.175-185
• /
• 1994

The purpose of this study was to evaluate and compare the biceps muscles activity at the different angle and direction of the base of support on sitting position in hemiplegic patients. The biceps muscles activity was measured at the $0^{\circ},\;10^{\circ}$ of posterior tilt, $10^{\circ}$ of anterior tilt, $10^{\circ}$ of affected side tilt and $10^{\circ}$ of sound side tilt of the base of support by EMG biofeedback (MYOMED 432. ENLAF NONIUS CO.) In this study, 24 out-patients were evaluated who were treated at Yonsei University Medical College Rhabilitation Hospital. This study was carried out from December 5. 1993 to March 30. 1994. In order to determine the statistical significance of result, the ANOVA, and t-test were applied at the 0.05 level of significance. The results were as follows : 1. The biceps muscles activity of the sound side was no significantly difference at the different angle and direction of the base of support on sitting position(p>0.05). 2. The biceps muscles activity of the affected side was significantly increased at the 100 of sound side tilt and $10^{\circ}$ of posterior tilt of the base of support on sitting position(p<0.05). 3. There was no significantly difference in the change of the biceps muscles activity of the affected side between the affected group and the intact group of propriocetive sense(p>0.05). 4. The change of the biceps muscles activity of the affected side was significantly higer in the group of G 2 spasticity compared to that of G 1, G 1+ spasticity(p<0.05). These results showed that the biceps muscles activity of affected side was significantly increased when the base of support was tilted toward the sounde side and posterior direction on sitting position. In order to prevent the increment of biceps muscle activity, the patients must avoid to sit toward sound side and posterior tilt.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.47-53
• /
• 2005

AMachine vision is a promising tool for the autonomous guidance of farm machinery. Conventional CCD camera for the machine vision needs a desktop PC to install a frame grabber, however, a web camera is ready to use when plugged in the USB port. A web camera with a notebook PC can replace existing camera system. Autonomous steering control system of this research was intended to be used for combine harvester. If the web camera can recognize cut/uncut edge of crop, which will be the reference for steering control, then the position of the machine can be determined in terms of lateral offset and heading angle. In this research, a white line was used as a cut/uncut edge of crop for steering control. Image processing algorithm including capturing image in the web camera was developed to determine the desired travel path. An experimental vehicle was constructed to evaluate the system performance. Since the vehicle adopted differential drive steering mechanism, it is steered by the difference of rotation speed between left and right wheels. According to the position of vehicle, the steering algorithm was developed as well. Evaluation tests showed that the experimental vehicle could travel within an RMS error of 0.8cm along the desired path at the ground speed of $9\sim41cm/s$. Even when the vehicle started with initial offsets or tilted heading angle, it could move quickly to track the desired path after traveling $1.52\sim3.5m$. For turning section, i.e., the curved path with curvature of 3 m, the vehicle completed its turning securely.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.35-41
• /
• 1997

A series-fed microstrip array antenna of beamwidth $10^{\circ}$, squint angle $80^{\circ}$ and SLL -15 dB below is designed. Series-fed arrays are formed by interconnecting all the elements by high-impedance transmission lines and feeding the power at the first element and it is a traveling-wave antenna which is terminated with a matched load. Radiation patterns and impedance matching of the antenna are analyzed by Ensemble 4.0, which is a popular software package for designing printed antennas and arrays. The squint angle of beam can be controlled by the spacing between the elements. The major advantages of series-fed array antennas are that feed arangement is compact and the losses associated with the feeding network are less than those of a corporate feed type. The antennas are fabricated on the RT/Duroid Laminates of 62 mil thickness. The experimental results are very close to the specifications to be designed.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2010

Purpose : To calculate the appearance of the image distortion from metallic artifacts and to determine the location of a metallic needle from a distorted MR image. Materials and Methods : To examine metal artifacts, an infinite metal cylinder in a strong magnetic field are assumed. The cylinder’s axis leaned toward the magnetic field along some arbitrary angle. The Laplace equation for this situation was solved to investigate the magnetic field distortion, and the simulation was performed to evaluation the image artifact caused by both readout and slice-selection gradient field. Using the result of the calculation, the exact locations of the metal cylinder were calculated from acquired images. Results : The distances between the center and the folded point are measured from images and calculated. Percentage errors between the measured and calculated distance were less than 5%, except for one case. Conclusion : The simulation was successfully performed when the metal cylinder was skewed at an arbitrary tilted angle relative to the main magnetic field. This method will make it possible to monitor and guide both biopsy and surgery with real time MRI.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.739-748
• /
• 2020

In this study, a wrist protector was manufactured and designed using 3D printing technology to prevent wrist pain when riding a bicycle with a high forward-tilted saddle. The efficiency of the design was analyzed in objective and subjective evaluations. First, seven women in their twenties selected their most preferred design by subjective evaluation from among three 3D wrist protectors. Then electromyography (EMG) was measured and subjective sensations were evaluated while wearing and not wearing the preferred 3D wrist protector as selected by cyclists. Experimental results showed that a wrist-bending angle of 30 degrees was most favored. When the 3D wrist protector was worn, muscle activity was smaller at the flexor carpus radialis position than when the 3D wrist protector was not worn; muscle fatigue was also lower. In the subjective evaluation, the 3D wrist protector was more comfortable than no protector, and wrist fatigue was also lower. In addition, the wrist protector was rated positively for its design suitability, size adequacy, ease of operation, and fit; however, cyclists felt that a little more cushioning was needed.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1587-1592
• /
• 2006

We report the preparation, structure and magnetic properties of a new pillared complex, copper(II) hydroxy-1,4-butanedisulfonate, $Cu_2(OH)_3(O_3SC_4H_8SO_3)_{1/2}$. The titled compound was obtained by anion exchange, using copper hydroxyl nitrate $(Cu_2(OH)_3NO_3)$ as the starting material. According to the XRD data, this compound exhibits a pillared layered structure with organic layers tilted between the copper hydroxide layers with a tilt angle of $21.8^{\circ}$. FTIR spectroscopy confirms total exchange of nitrate by the sulfonate and indicates that the sulfonate functions are linked to the copper(II) ions with each aliphatic chain bridging the adjacent hydroxide layers. According to the dc and ac magnetic measurements, the title compound is a metamagnet consisting of spin-canted antiferromagnetic layers, with a Neel temperature of 11.8 K.