• 제목/요약/키워드: Tilling

검색결과 74건 처리시간 0.021초

Physical and Chemical Management Practices for Improving Water Quality in Channel Catfish Ictalurus punctatus Aquaculture

  • Seo, Jin-Won
    • 한국양식학회지
    • /
    • 제15권1호
    • /
    • pp.49-60
    • /
    • 2002
  • Research on practices for improving water quality in channel catfish Ictalurus punctatus ponds was conducted at the Auburn University Fisheries Research Station, Auburn, Alabama, in 1998 and 1999. The objective of this two-year study was to determine better management practices to enhance water quality and improve production efficiency. In the first year, oxidation of bottom soil by drying, tilling, and applying sodium nitrate was performed (dry-till and dry-till with sodium nitrate treatments). The second year, based on the results obtained during the first year, precipitation of phosphorus (P) from water by applying gypsum was compared to the dry-till treatment (dry-till and dry-till with gypsum treatments). Control ponds were not subjected to bottom drying, tilling, sodium nitrate, or gypsum treatment. Channel catfish fingerings were stocked at 15,000/ha. In the first year, water in ponds from dry-till and dry-till with sodium nitrate treatments had lower concentrations (P < 0.01) of soluble reactive P, nitrate ($NO_{3} ^{-}) and nitrite ($NO_{2} ^{-}) nitrogen (N), total ammonia ($NH_3$) nitrogen, total suspended solids and turbidity, and higher values of pH, Secchi disk visibility, total alkalinity, total hardness, and calcium ($Ca^{2+}) hardness than water in control ponds. Ponds of the dry-till treatment also had lower concentrations (P < 0.01) of total P and total N than control ponds. Total fish production and survival rate did not differ among the treatments (P > 0.05). The findings suggested that drying and tiling pond bosoms between crops could achieve water quality improvement. Applying sodium nitrate to dry, tilled pond bosoms did not provide water quality improvement. In the second year, the treatment with the best results from the first year, dry-till, was compared with a dry-till with gypsum treatment. Enough gypsum was applied to give a total hardness of about 200 mg/L, and gypsum was reapplied as needed to maintain the hardness. Compared to the control, dry-till and dry-till with gypsum treatments had lower concentrations (P < 0.01) of total and soluble reactive P, total N, and total $NH_3$-N, and higher concentrations (P < 0.01) of dissolved oxygen. Ponds of the duty-till with gypsum treatment also had lower concentrations (P < 0.01) of chlorophyll $\alpha$, chemical oxygen demand, and total alkalinity than the control. Total fish production and survival rate did not differ (P > 0.05) among the treatments. These findings suggest that drying and tilling pond bosoms between crops and treating low hardness waters with gypsum could achieve water Quality improvement.

중부지방에서의 로터리 경운작업 실태조사 및 경운부하 (Research on the Actual Condition of Rotary Tilling & Rotary Power Requirement in the Central Area)

  • 명병수;이현동
    • 한국산업융합학회 논문집
    • /
    • 제12권2호
    • /
    • pp.79-83
    • /
    • 2009
  • In this study, actual state of operation of rotary tillage was surveyed in the central part of Korea which includes 29 rural community around Asan city, Choongnam principal. 29 heads of the village and 44 farmers were surveyed at the field with a questionnaire on the operation of rotary tillage with farm tractors. Power requirement of rotary tillage operation was measured at the field of each farmers during rotary tilling operation in the central part of Korea. Summaries of this study are summarized as follows. 1) Operations of tillage and land preparation were found to be carried out with farm tractors by 98 percents which are results of the survey on 29 heads of the village and 44 farmers. 2) More than half of the farms had tractors with horsepower more than 38 kW which states that most tractors were supplied in middle and large size. 3) The case of applying secondary tillage after the first primary tillage were 79 percent among the most of operations of tillage and field preparation. Rotary tillage were carried out on the most of wet paddy fields and only 14 percent of dry fields were cultivated with rotary tillage. 4) 63.6 percent of farm tractors were surveyed to meet the recommended field capacity on tillage operation by the government which were ranged from 15.1 to 34.9 ha. And the field capacity of these farm tractors were greater than that of annual total area of operation field, 13.2ha (data from Information of agricultural machinery, National agricultural products quality service, Korea), which states the utilization of agricultural machinery was high in the area surveyed. 5) 46 percent of farmers changed the blade of rotary implement when they used it over the field capacity of rotary blade of 33 ha which is the area of field for rotary operation per a blade change. 55 percent of farmers changed the rotary blade more than once per two years. 6) The required power for rotary operation of each farm tractors were measured as 17.206 kW at untilled paddy field and 34.989 kW at untilled dry field on the average, respectively. The required power for rotary operation was measured as 28.248 kW on the average at the paddy field which had been plowed once and 28.015 at the paddy field that had rotary tillage operation. Untilled dry field showed the highest value of the required power for rotary operation.

  • PDF

트랙터의 무인경운을 위한 작업경로 생성과 성능평가 기술개발(1) - DGPS를 이용한 트랙터 경운작업시 운전패턴조사 - (Development of working path formation and performance appraisingtechnology for tractor unmanned tillage (1) - Analysis of operation pattern using DGPS in tractor tilling operation -)

  • 이영규;김찬수;;오종진;조성찬;나우정;김기대
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2006년도 동계 학술대회 논문집
    • /
    • pp.82-87
    • /
    • 2006
  • PDF

RESEARCH ON AUTONOMOUS LAND VEHICLE FOR AGRICULTURE

  • Matsuo, Yosuke;Yukumoto, Isamu
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.810-819
    • /
    • 1993
  • An autonomous lan vehicle for agriculture(ALVA-II) was developed. A prototype vehicle was made by modifying a commercial tractor. A Navigation sensor system with a geo-magnetic sensor performed the autonomous operations of ALVA-II, such as rotary tilling with headland turnings. A navigation sensor system with a machine vision system was also investigated to control ALVA-II following a work boudnary.

  • PDF

틸팅 패드 추력베어링의 동특성 해석 (An Analysis of Dynamic Characteristics of Tilling Pad Thrust Bearings)

  • 김종수
    • Tribology and Lubricants
    • /
    • 제13권3호
    • /
    • pp.33-41
    • /
    • 1997
  • In this paper the linearized stiffness and damping coefficients of tilting pad thrust bearing are calculated by the perturbation method. The coefficients are obtained for a wide range of pivot positions. The effects of exciting frequency and pad mass on stiffness and damping coefficients are investigated. Critical frequencies due to the tilting motions of the pad are presented and are shown to be strongly influenced by the pivot position and the pad mass.

트랙터용 경제운전 안내장치 개발 (Development of Eco Driving System for Agricultural Tractor)

  • 박석호;김영중;임동혁;김충길;정상철;김혁주;장양;김성수
    • Journal of Biosystems Engineering
    • /
    • 제35권2호
    • /
    • pp.77-84
    • /
    • 2010
  • In this study, we tried to predict tractor power output, fuel consumption rate and work performance indirectly in order to develop an eco driving system. Firstly, we developed equations which could predict tractor power output and fuel consumption rate using characteristic curves of tractor power output. Secondly, with actual engine rpm determined by initial engine rpm and work load, tractor power output and fuel consumption rate were forecasted. Thirdly, with speed signals of GPS sensor system, it was possible to foresee tractor work performance and fuel consumption rate. Lastly, precision of the eco driving system was evaluated through tractor PTO test, and effects of the eco driving system were investigated in the plowing and rotary tilling operations. Engine rpm, power output, fuel consumption rate, work performance and fuel consumption rate per plot area were displayed in the eco driving system. Predicted tractor power outputs in the full load curve were well coincided with the actual power output of prototype, but small differences, 1 to 6 ㎾, were found in the part load curve. Error of the fuel consumption rate was 0.5 L/h, 4.5%, the greatest, and 1 to 3 L/h at the part load curve. It was shown that 69% and 53% of fuel consumption rates could be reduced in plowing and rotary tilling operations, respectively, when the eco driving system was installed in tractor.

농용(農用)트랙터의 전자유압식(電子油壓式) 경심(耕深) 제어(制御) 시스템 개발(開發) (Development of an Electronic-Hydraulic Tilling-Depth Control System for Agricultural Tractors)

  • 류관희;유수남;윤여두;사카이 준;김영상
    • Journal of Biosystems Engineering
    • /
    • 제16권4호
    • /
    • pp.355-362
    • /
    • 1991
  • The objective of this study was to develop an electronic-hydraulic depth control system. Simulation was carried out to investigate the responses of the control system, and indoor experiments were carried out to confirm the simulation results of the control system. Field experiments were carried out to compare the newly-developed electronic-hydraulic depth-control system with the existing mechanical-hydraulic position control system in terms of the performance of depth control. The electronic-hydraulic depth control system showed better performance than the existing mechanical-hydraulic hitch control system for the forward speeds of tractor less than 7 km/h. It is concluded that the new control system could be adapted to the existing tractors with slight modifications to the conventional mechanical-hydraulic hitch control systems.

  • PDF

매몰형 자갈밭 로타리의 경운특성 (Tilling Properties of Stone Burying Rotarvator)

  • 김상철;박우풍;이운용;김용덕;윤창신
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2003년도 하계 학술대회 논문집
    • /
    • pp.128-133
    • /
    • 2003
  • 우리나라는 국토의 약 68%가 산악지형으로 포장의 경사와 토양중의 자갈이 밭작물의 재배와 기계화에 장애가 되고 있다. 포장중의 자갈은 토양의 보습력과 통기성을 향상시키고 경사지에서의 토양침식을 방지하는 긍정적 측면이 있으나, 자갈이 토양 표면에 산재할 경우 작물의 발아와 입모를 억제하고, 작물생육을 위한 토양환경을 조성하는 경운작업 재배관리 작업을 어렵게 하기 때문에, 농민들은 포장내의 자갈을 제거하기 위해 많은 노력을 기울이고 있다. 특히 관행 로타리 작업 시에는 자갈이 대부분 토양 표면에 노출됨으로 생육환경 및 기계작업 환경을 더욱 악화시키게 된다. 2cm이상의 자갈이 토양 표면에 있을 경우 기계 파종이나 이식이 어렵고 발아이후의 생육도 좋지 않게 된다. 그러나 지중에 존재하는 자갈은 토양의 투수성을 향상하여 경사지에서 토양침식을 막아주고, 수분과 온도의 보지력을 크게하고 토양 통기성을 향상시키므로 뿌리의 발육을 촉진해 준다. (중략)

  • PDF

한국형 틸팅열차 신뢰성 시험평가를 위한 SE구축사례 (Case study of systems engineering to evaluate the reliability test for Korean tilting train)

  • 한성호;최성규
    • 시스템엔지니어링학술지
    • /
    • 제5권1호
    • /
    • pp.43-48
    • /
    • 2009
  • Korean Tilting trains have been tested on conventional lines since the beginning of 2007 for evaluating its reliability. We achieved some major performance tests which are the maximum operation speed, 180km/h test and the maximum curves increasing speed, over 30 percentage comparing with non-tilling operation train. In order to analysis reliability data of tilting train, we have used the special system engineering frame with interfacing between component suppliers effectively. And also we have developed the data aquisition system which consists of monitor, sensors and depot computer etc. As a results of calculation, until now we realized that the reliability are getting more increasing than starting point of running field test.

  • PDF