• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.130-134
• /
• 2010

To investigate effects of deep tillage before planting on physicochemical properties of soil, growth and fruit characteristics in cultivation of watermelon (Citrullus vulgaris L. cv. 'Uriggul') under plastic film house, this study was conducted in cultivating field of Gochang Junbuk. pH in soil after harvest compared with soil before planting of watermelon had almost no change, but EC lowed greatly in the two treatments. Available phosphate concentration in the soil with the deep tillage treatment was lower, K concentration of exchangeable cation decreased greatly than these with conventional tillage treatment. In the growth at 27th day after planting plant, stem length to 10th node from the first node, leaf width with deep tillage treatment were longer, bearing node of the first and second flower and wilting degree were lower than these with conventional tillage treatment. In the growth of harvesting time, the stem length to 30th node from the first node with the deep tillage treatment were longer, leaf discoloration degree was lower than these with conventional tillage treatment. Also, the harvested fruits length, diameter, peel hardness, and weight were significantly better than these with conventional tillage treatment.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.521-528
• /
• 2002

Rotary and plow implements are mainly utilized for the tillage operation in Korea, and a implement control system for agricultural tractors was designed and fabricated to improve the working accuracy and efficiency. The control system was composed of three units: 1) sensors fur detection of angle of liftarm, draft force, engine rpm, tillage depth and so on, 2) a controller, and 3) hydraulic circuits, which included solenoid valves and so on, for operation of three point linkage and implements. The control system can control the speed(high and low speed) of implements by adjusting input flow rates of the hydraulic cylinder which was controled by two speed valve, which was composed of a solenoid valve and a orifice. Indoor experiments were conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various engine nm, two kinds of input flow rates of the cylinder and some input frequency. The results of experiments showed the response characteristics sufficient to use as the implement control system fur agricultural tractors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.176-180
• /
• 2011

Rice production depended on the weed control. The purpose of this study was conducted to evaluate the influence of tillage with chemical amendments + 5 cm flooded, no-tillage without Chinese milk vetch + 5 cm flooded (NTNT 5 cm), no-tillage amended with Chinese milk vetch + 5 cm flooded (NTCM 5 cm), and no-tillage amended with Chinese milk vetch + 10 cm flooded (NTCM 10 cm) on weed occurrence and yield of rice in paddy. Triplicate experimental plots were laid out in a randomized complete block design and compared by employing least significant difference. The dry weights of weeds in NTCM 5 cm and NTCM 10 cm were 11% and 4% level of NTNT 5 cm (p<0.05) and were 3.2 times and 1.2 times more than in conventional tillage system. In addition, the Aneilema keisak and Ludwigia prostrata were significantly increased in NTNT 5 cm (p<0.05). The yield of rice grain in NTCM 10 cm was 2.6 times more than in NTNT 5 cm and was 89% level of conventional tillage system. Our findings suggest that NTCM 10 cm should be enhance of weed control as well as improving of yield of rice in paddy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.200-208
• /
• 2010

The objectives of this study were to evaluate no-tillage cover crop cropping systems for organic farming in paddy. The experiment was performed at Ihyeon series (silt loam: 9.1% sand, 73.0% silt and 17.9% clay) which affected by different management practices. Planthopper population per 20 plant was significantly higher 65.3 for conventional tillage with chemical compounds (control) compared with 3.4~9.6 for no-tillage treatments (without rice straw or green manure, amended with rice straw, hairy vetch, rape, rye, and Chinese milk vetch). Also, disease severity of sheath blight was significantly higher 10.5% for control compared to 0.7~2.9% for no-tillage treatments. Four weed species, namely Monochoria vaginalis, Ludwigia prostrata, Rotala indica, and Aneilema keisak occurred in no-tillage paddy, whereas Monochoria vaginalis occurred in control only. The pH, available phosphate, and microbial biomass C in paddy were steeply decreased in response to submerging, but increased at first heading stage. Soil $NH_4$-N content at first heading stage was significantly higher in no-tillage treatments compared with control. The grain yield was significantly higher in 4.30 Mg $ha^{-1}$ for control than other treatments. Meanwhile, rice productivity was significantly higher in 2.69 Mg $ha^{-1}$ for no-tillage amended with Chinese milk vetch compared to other no-tillage treatments. The number of panicle per plant, grain number perpanicle, and percent ripened grain were highly related for increasing the yield of rice. These results show that Chinese milk vetch was optimum cover crop for organic farming in no-tillage paddy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.232-236
• /
• 2000

To obtain a basic information on the development of effective control strategies for weedy rice in direct seeding rice cultivation, occurrence patterns of weedy rice as influenced by different cultural practices such as cultivation method, water management, seeding time, and tillage were investigated in field or pot experiments. High occurrence of weedy rice was observed in a continuous direct seeding paddy field as compared to machine transplanted one. Based on the percent of weedy rice panicle over three years trial, high ridged dry seeding was highest with 36.9%, followed by wet seeding with 30.9%, water seeding with 14.6% and machine transplanting rice with 0.8%, indicating 97.8% reduction in weedy rice occurrence by machine transplanting rice as compared with high ridged dry seeding. Germination of weedy rice was promoted to 83-94 % when rice panicle was flooded from September 30 to October 10 for 6 days and 74-88% for 9 days on October 20. Weedy rice occurrence was also substantially reduced by delayed seeding on June 10 and intensive tillage. The results suggest that machine transplanting rice be more effective cultural practice than flooding treatment, delayed seeding and intensive tillage when weedy rice problem occurs in direct seeded paddy field.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.23-31
• /
• 2019

The purpose of this study was to evaluate the PTO severeness for an agricultural tractor during disk plow and rotary tillage. The PTO load measurement system was constructed with data acquisition and a PTO torquemeter. Field experiments were conducted at a combination of traveling speed (L3 Low, L3 High) and PTO speed (P1, P2). The load spectrum was generated using the rain-flow counting method, and the SWT method was used to consider the range and mean of the PTO load. The damage sum was calculated by applying a modified miner rule, which is a cumulative damage law. The relative severeness was expressed as the ratio of the lowest damage sum. Relative severeness was higher with the lower PTO gear stage, and higher driving gear stage and it was approximately 40-102 times higher for rotary tillage than disk plow tillage in the same gear stages. The relative severeness was 1010.12 in the rotary tillage under L3 High P1 based on the disk plow tillage under L3 Low P2.

• Journal of Drive and Control
• /
• v.20 no.2
• /
• pp.31-39
• /
• 2023

The aim of this study was to measure and analyze engine load factor (LF) according to working conditions (operation type and gear stage) of small agricultural multi-purpose cultivator to estimate the emission of air pollutants. To calculate LF, a torque sensor capable of collecting torque and rotational speed was installed on the engine output shaft and DAQ was used to collect data. A field test was conducted with major operation of a cultivator and tillage operations (plow tillage and rotary tillage). Engine power was calculated using engine torque and rotational speed and LF was calculated using real-time power and rated power. In addition, unified LF was calculated using the weight for each operation and the average LF for each operation. As a result, average LF values at 1.87 and 3.10 km/h by plow tillage were 0.50 and 0.69, respectively. Average LF values at 1.87 and 3.10 km/h by rotary tillage were 0.70 and 0.78, respectively. Furthermore, unified LF calculated in consideration of the weight factor showed a value of 0.65, which was 135% higher than the conventional LF (0.48). Results of this study could be used as basic information for realizing LF values in the field of agricultural machinery.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.89-95
• /
• 2011

Tractor implements are mainly utilized for the tillage operation. The proposed hydraulic system control was implemented to experimental apparatus. An implement control system for tractor using proportional valve was fabricated to improve the working efficiency. Hydraulic circuit included the proportional solenoid valve and on/off solenoid valve and so on. This paper shows results of a specification and design of an implement control system for tractor using proportional valve for automation. It was conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various input flow rates. The results of experiments showd that the response characteristics was sufficient to be used as the implement control system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.5
• /
• pp.381-387
• /
• 2003

Winter hairy vetch (HV) can be used as green manure with conventional tillage system (CT), in which chemical N fertilizer required for cultivation of sub-sequent com could be fully saved, or as cover crop with no-tillage system (NT) in which soil could be protected from erosion, control of weed, and the reduction of N fertilizer application. This experiment was carried out to compare the enrichment of soil mineral nitrogen (SMN) at corn root zone, and the changes of com growth and N uptake according to HV amounts (winter fallow, above-ground HV removed, intact HV, and HV added from aboveground HV removed) under two tillage systems in the upland field of National Crop Experiment Station, Suwon, Korea in 1996. HV cultivation during winter decreased SMN a little at com planting. HV incorporation with CT increased SMN rapidly during early growth stage according to rapid decomposition of Hv. SMN by HV cover with NT was increased slowly and its increase was higher in the surface soil (soil layer 0-7.5cm) compared to deep soil layer 7.5-22cm. Com growth and N status at corn silking stage, com yield and N uptake at harvest were increased in proportion to aboveground HV amounts regardless of tillage system. Average hairy vetch nitrogen (HV-N) uptake efficiency by com was 10% higher with CT than with NT in which average HV-N uptake efficiency was 43 %. Corn yields were not different between two tillage systems, but corn N uptake was increased by 33 kgN/ha more with CT than with NT due to the increase of corn N concentration. The increase of SMN and com N uptake from HV cover with NT could not be disregarded though those with CT were higher than with NT

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.55-62
• /
• 2000

Autonomous farm operation needs to be developed for safety, labor shortage problem, health etc. In this research, an autonomous tractor for tillage was investigated using machine vision and a fuzzy logic controller(FLC). Tractor heading and offset were determined by image processing and a geomagnetic sensor. The FLC took the tractor heading and offset as inputs and generated the steering angle for tractor guidance as output. A color CCD camera was used fro the image processing . The heading and offset were obtained using Hough transform of the G-value color images. 15 fuzzy rules were used for inferencing the tractor steering angle. The tractor was tested in the file and it was proved that the tillage operation could be done autonomously within 20 cm deviation with the machine vision and the FLC.