• 한국안광학회지
• /
• 제14권3호
• /
• pp.17-27
• /
• 2009

목적: Tight fit 상태에서 BC, 직경, 모서리각 등 하드(RGP 포함) 콘택트렌즈의 변수가 렌즈의 평형위치에 복귀하는 시간에 미치는 영향을 고찰하였다. 방법: Tight fit 상태에서 여러 렌즈 변수에 대해 렌즈의 평형위치 이탈 거리에 따른 복원력 및 렌즈 아래 눈물 층 두께를 계산할 수 있는 방정식을 세웠다. 이에 근거하여 눈깜빡임 후 매 순간 렌즈의 위치를 예측할 수 있는 미분방정식과 수치계산 프로그램 모델을 수립하였다. 이 컴퓨터 모델을 사용하여 렌즈 변수 변화에 따른 매 순간 렌즈 위치를 예측할 수 있었다. 결과: Tight fit 상태에서는 BC가 감소할수록, 직경이 커질수록 렌즈 아래 눈물 층의 간격이 두꺼워져 점성저항이 감소하며 결과 평형위치 복귀시간이 단축된다. Tight fit 렌즈는 모서리 각도가 증가할수록 복원력이 증가하여 평형위치 복귀시간이 단축된다. 이 경우 렌즈아래 눈물 층의 간격변화는 없다. Flat fit 상태에서 하드(RGP 포함) 렌즈는 BC가 증가할수록, 직경이 커질수록 렌즈 아래 눈물층의 간격이 두꺼워져 점성저항이 감소한다. 결과 평형위치 복귀시간이 단축된다. 이 경우 모서리각은 운동에 거의 영향을 끼치지 못한다. 결론: Tight 및 flat fit 상태 모두에서 BC가 렌즈운동(평형위치 복귀시간)에 영향을 미치며 그 효과는 서로 반대이다. 렌즈의 모서리각은 tight fit에서만 렌즈운동에 영향을 미친다.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.450-456
• /
• 2016

This study examines the wearing conditions of tight-fit pants of men in their 30's in order to develop patterns for tight-fit pants. Tight-fits are loved by the young generation. This fashion has established a notable trend and demand in the casual clothing market as well as in the men's wear market. The study conducted a survey targeting Korean males in their thirties, and a total of 76 samples were used for the final analysis. The study survey showed that a growing number of men wear tight-fit pants in their daily life and prefer brands that feel more casual when it comes to expressing themselves with fashion. The men indicated a desire to look slim; however, they also wanted their clothes to be wearable and not interrupted them while moving. Sales of men's wear targeting the thirties age group have increased every year; consequently, this will study suggests that any relevant fields should first have a good understanding on men in the thirties and their needs before designing any clothes. Discussions that this study developed will be applied as a basic reference to design patterns for functionally-efficient tight-fit pants. Those pants will correspond to the physical characteristics of the thirties who transition with changes in every body part that would not occur when they are in their twenties while not disrupting.

• 한국의상디자인학회지
• /
• 제23권4호
• /
• pp.149-166
• /
• 2021

This study tried to suggest a drafting method to draft tight fit torso patterns suitable for adult males with a sway back somatotype and a bend forward somatotype by setting and distributing the ease through the completion of the somatic surface pattern using the 3D body surface segment method. It was intended to be presented as a drafting method. As for the research method, the suitability of the somatic surface patterns and the tight fit torso patterns were confirmed by the evaluation of virtual wear, and the patterns were modified and supplemented. The research results are as follows. In the first evaluation of the tight fit torso patterns, the average, for 55 evaluation items, was 3.92 points for the sway back somatotype and 3.89 points for the bend forward somatotype. In the second evaluation, the bend forward somatotype was 4.51 points and the sway back somatotype was 4.62 points. The chest circumference ease amount for the bend forward somatotype and the sway back somatotype are 6.5% (6.8 cm) and 7% (6.8 cm) of the chest circumference, respectively, and the distribution of the front and back ease is the same at 4:6 (2.72 cm:4.08 cm). The waist circumference ease amount is 6.5% (5.8cm) and 6.5% (5.6 cm) of the waist circumference dimensions, and the distribution of the front and backease are 5:5 (1.45 cm: 1.45 cm) and 4:6 (2.24 cm: 3.36 cm), respectively. The completed tight fit torso patterns were converted into institutional formulas and presented as a drafting method.

• 대한인간공학회지
• /
• 제11권2호
• /
• pp.57-67
• /
• 1992

This study is to investigate the fitness of tight skirt in moving lower limb. The fit- ness was tested by measuring the step length, stride length, maximum stair step height. One humdred and twenty female subjects participated in the experiment. It was shown that the tight skirt caused the most reduction in the maximum stair step height among the five lengths measured. It was also shown that the long tight skirt limited the maximum stair step height more than the mini tight skirt.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.559-570
• /
• 2003

The focus of this research was concerned with studying lower body type for Korean adult males. To understand the features of men's lower body required to organize an optimal sizing system for men's tight-fit slacks, information from the measuring values based on research on the physical standard of the nation(l997) were summarized; in addition, a factor analysis and a cluster analysis among multivariate analyses were performed. In terms of the need for appropriate fit in motorcycle wear, basic lower body parts applying to each item had to be taken into consideration to enhance sizing suitability. In the case of the length of the lower limbs, the inclusion of protectors plays an important role in affecting sizing. The factors related to the lower body were defined as follows: Factor 1 was the vertical dimension of the lower body, Factor 2 was the horizontal dimension of waist and hip, Factor 3 was the horizontal dimension of the lower limbs, Factor 4 was the length of hips, and Factor 5 was the ankle height. The lower body part was also divided into 3 clusters. Cluster 1 referred to the smallest stature and skeleton structure among the 3 body types. Cluster 2 represented the biggest stature, with a thin lower limbs body type. Cluster 3 represented a medium stature but with a large skeleton structure of lower limbs, a muscular type. In conclusion, Cluster 2 appeared most in the 20s age groups, but Cluster 3 appeared most in each of the 30s, 40's, and 50's age groups.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.676-682
• /
• 2008

In this study a guideline of the 3D-fit pattern for the ECG(electrocardiogram) measurement of elderly's u-healthcare clothes was proposed. In the screening test of the ECG measurement band, ECG peak band was observable at the band pressure of 0.20 kPa. By employing a 3D body image, tight-fit 3D patterns were made at two different reduction rates of 21%(pattern 1) and 33%(pattern 2), and corresponding pressure of both of the clothes were 0.25 kPa and 0.54 kPa, respectively. Typical waves of ECG were found in both stationary and moving position. In terms of the subjective evaluation of the u-healthcare clothes when worn, it was confirmed that reduction pattern 1(0.25 kPa) conveyed comfortable clothing pressure and pleasantness, which is very close to the result of screening test of ECG band experiment. As results, it is recommended that reduction rate should be adjusted, so that clothing pressure is about 0.2 kPa for the elderly's comfortable and efficient u-healthcare clothes.

• 한국생활과학회지
• /
• 제15권3호
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).

• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• 복식문화연구
• /
• 제28권1호
• /
• pp.1-14
• /
• 2020

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4-1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)-0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)-1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)-1.2 cm and 3.5 cm. Front chest circumference was C/4-1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4-0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)-0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.