• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.540-543
• /
• 2007

최근의 그리드 컴퓨팅 시스템 환경은 단일 환경에서 작게는 2~4CPU, 많게는 수백 CPU 이상의 시스템으로 구축되고 있고, 더욱이 지역적으로도 멀리 떨어져 있다. 따라서 이를 운용하는 기업에서는 시스템의 사용 현황을 신속하게 분석할 필요가 있다. 그러나 이렇게 혼재된 이 기종 및 컴퓨팅 환경하에서의 각 지역별 시스템 사용현황을 효과적으로 분석 한다는 것은 매우 어려운 일이다. 기존에 사용되어 온 그리드 컴퓨팅 시스템 환경에서의 사용율 관리 방법들은 Queueing 시스템이 가지고 있는 Accounting 분석 명령어로 text 형태의 Accounting raw data 의 결과를 추출하여 가공 처리하므로 데이터 증가 시 반응 속도가 현격하게 느려지는 상황이 발생한다. 또한 원격지 그리드 컴퓨팅 시스템 군의 사용율 분석은 데이터 분석 시 매번 원격지접근 절차를 사용하여 그리드 컴퓨팅 시스템 군에 접근한 후 해당 로컬 시스템 분석을 해야 하고 각 원격지시스템군별로 추출 된 데이터를 통합 관리해야 하는 문제점을 가지고 있다. 따라서 이러한 문제점을 해결하고자 하는 것이 본 논문에서 제안하는 3-tier 구조의 GSA(Grid System Account)이다. 제안한 GSA 는 각 원격지 별 데이터를 객체화하여 Database 에 저장 함으로써 데이터 분석 시 효과적으로 처리할 수 있으며, 다수의 원격지 그리드 컴퓨팅 시스템 군에 대한 복합적인 분석이 필요할 때 효율적으로 대처할 수 있다. 본 논문에서는 GSA 의 설계방법을 제안하고 구현하여 실 성능을 시험함으로써 보다 효율적인 그리드 컴퓨팅 시스템의 사용율 분석 관리가 가능함을 보였다.포는 감수성을 보이지 않았다. 따라서 위의 결과로부터 SLT-I에 감수성을 보이지 않은 Raw264.7세포를 대상으로 Gb3 발현 정도와 SLT-I의 세포독성의 관계를 규명하고자 Gb3의 발현을 증가시킨 후 SLT-I의 세포독성을 재차 평가하였다. 이 결과 $TNF-{\alpha}$의 처리에 의하여 6 hrs에 Gb3의 발현이 정점(43.5%)에 이르렀으며 36 hrs에 정상 수준(25.0%)으로 환원되었다. 그러나, Gb3의 발현이 증가함에도 불구하고 SLT-I의 세포독성에는 변화가 관찰되지 않았다. 따라서, SLT-I에 의한 세포독성은 세포의 종류에 따라서 다르며 또한, Gb3의 발현정도에만 의존적이지는 않을 것으로 생각된다. 이와 같은 결과는 E. coli 0157의 감염증 병인 연구에 있어 SLT-I과 Gb3의 발현의 상관관계에 대한 보다 심도 있는 연구가 필요함을 시사한다.만 분할률, 배반포 형성률 및 배반포의 세포수를 증가시키는 것으로 사료된다.수의 유출입 지점에 온도센서를 부착하여 냉각수의 온도를 측정하고 냉각수의 공급량과 대기의 온도 등을 측정하여 대사열의 발생을 추정할 수 있었다. 동시에 이를 이용하여 유가배양시 기질을 공급하는 공정변수로 사용하였다 [8]. 생물학적인 폐수처리장치인 활성 슬러지법에서 미생물의 활성을 측정하는 방법은 아직 그다지 개발되어있지 않다. 본 연구에서는 슬러지의 주 구성원이 미생물인 점에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.281-292
• /
• 2008

A main application of sensor networks are to monitor and to send information about a possibly hostile environment to a powerful base station connected to a wired network. To conserve power from each sensor, intermediate network nodes should aggregate results from individual sensors. However, it can make it that a single compromised sensor can render the network useless, or worse, mislead the operator into trusting a false reading. In this paper, we propose a protocol to give us a key aggregation mechanism that intermediate network nodes could aggregate data more safely. The proposed protocol is more helpful at multi-tier network architecture in secure sessions established between sensor nodes and gateways. From simulation study, we compare the amount of the energy consumption overhead, the time of key transmission and the ratio of of key process between the proposed method and LHA-SP. The simulation result of proposed protocol is low 3.5% a lord of energy consumption than LHA-SP, the time of key transmission and the ration of key process is get improved result of each 0.3% and 0.6% than LHA-SP.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.122-129
• /
• 2009

Strategic planning is an essential function of senior management in any business firm. Planning involves the firm's behavior in an competitive market and adaptation of the company's resources towards the selected market strategy. This study presents a methodological procedure for strategic planning in global top-tier construction firms. This procedure consists of the following stages. First, analyzed growth of revenue in which weight of total construction firms' revenue shown in Global Top 225 Contractors(ENR). Second, analyzed specialty of construction products. The products are General Building, Power, Water Supply, Industrial/Petroleum Process, and Transportation. Third, analyzed business the portfolio plan. The business portfolio plan includes both local/overseas market and specification/diversification of construction products. It affects the subsequent choice of a benchmarking for development of each construction company. The choice of the benchmarking firm, among several available alternatives, should follow a careful analysis of the characteristics and benefits inherent in the implementation of each.

• Journal of Korea Game Society
• /
• v.2 no.2
• /
• pp.113-119
• /
• 2002

With development of internet technology, digital economy that advance rapidly formed much leagues of B2B, B2C, A2B etc, according to the application part. Also, electronic commerce system implementation technology is introduced by Component based on development method in object oriented technique base depending on customer's requirement, and development environment changes by 3- Tiers, Web-Based architecture etc. in existent C/S (Client/Server) environment and is introduced. Thus, In this research, I implemented seat reservation and confirmation system that can be used in electronic commerce in multi-server environment. This, for improve efficiency in distribute environment, relevant importance logic used server component model EJB, and implemented through JSP and Java that use Servlet of Resin Server environment for Main Server. Therefore, through independence component using EJB, I did so that can improved independence between electronic commerce system logic, and reduce server's overhead calling relevant method through discrete EJB server, and manage each logic resources efficiently.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2370-2387
• /
• 2000

This paper proposes a new design strategy that can overcome limitations of two existing approaches, focusing on performance and scalability issues among various architectural issues which must be considered in designing workflow systems. In the proposed approach, we suggest to introduce 'delegation model' which corresponds to the high-level strategy utilizing the fundamental characteristics of mobile agents, after establishing a mobile agent-based workflow system architecture focused on performance and scalability. We point out three major issues that should be considered in this approach and propose a 3-tier mobile agent-based workflow system architecture that effectively reflects these considerations. Also, we show that the new approach can provide better performance and scalability than existing ones - approaches based on the client-server paradigm and other approaches based on mobile agent paradigm represented by DartFlow system - by evaluating performance of the proposed architecture through the GSPN simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1424-1432
• /
• 2015

As the wireless communication technologies are being studied for application to maritime communication networks in a fusion of marine industries and IT technology, interference coordination techniques have been studied in the maritime heterogeneous networks. In this paper, we develop a simulator for measuring, verifying and evaluating performance of a maritime heterogeneous network. Unlike other previous simulators, the developed simulator applies enhanced inter-cell interference coordination (eICIC) that are being introduced in the 3GPP Release 10 for mitigating the cross-tier interference between ships. Furthermore, we investigate the effects of almost blank subframes (ABS) and cell range expansion (CRE) on the throughput of small cells in maritime heterogeneous networks by using the developed simulator.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.4
• /
• pp.18-29
• /
• 2019

A dynamic adaptive streaming server consumes high processor power because it handles a large amount of transcoding operations at a time. For this purpose, multi-processor architecture is mandatory for which effective transcoding task distribution strategies are essential. In this paper, we present the design and implementation details of the transcoding workload distribution schemes at a 2-tier (frontend node and backend node) transcoding server. For this, we implemented four schemes: 1) allocation of transcoding tasks to appropriate back-end nodes, 2) task scheduling in the back-end node and 3) the communication between front-end and back-end nodes. Experiments were conducted to compare the estimated and the actual power consumption in a real testbed to verify the efficacy of the system. It also proved that the system can reduce the load on each node to optimize the power and time used for transcoding.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.236-256
• /
• 2011

Forest carbon stocks change due to land use change is an important data required by UNFCCC(United Nations framework convention on climate change). Spatially explicit estimation of forest carbon stocks based on IPCC GPG(intergovernmental panel on climate change good practice guidance) tier 3 gives high reliability. But a current estimation which was aggregated from NFI data doesn't have detail forest carbon stocks by polygon or cell. In order to improve an estimation remote sensing and GIS have been used especially in Europe and North America. We divided research trends in main countries into 4 categories such as remote sensing, GIS, geostatistics and environmental modeling considering spatial heterogeneity. The easiest way to apply is combination NFI data with forest type map based on GIS. Considering especially complicated forest structure of Korea, geostatistics is useful to estimate local variation of forest carbon. In addition, fine scale image is good for verification of forest carbon stocks and determination of CDM site. Related domestic researches are still on initial status and forest carbon stocks are mainly estimated using k-nearest neighbor(k-NN). In order to select suitable method for forest in Korea, an applicability of diverse spatial data and algorithm must be considered. Also the comparison between methods is required.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.59-87
• /
• 2014

In MIS field, the researches on payment services are focused on adoption factors of payment service using behavior theories such as TRA(Theory of Reasoned Action), TAM(Technology Acceptance Model), and TPB (Theory of Planned Behavior). The previous researches presented various adoption factors according to types of payment service, nations, culture and so on even though adoption factors of identical payment service were presented differently by researchers. The payment service industry relatively has strong path dependency to the existing payment methods so that the research results on the identical payment service are different due to payment culture of nation. This paper aims to suggest a successful adoption factor of noble payment service regardless of nation's culture and characteristics of payment and prove it. In previous researches, common adoption factors of payment service are convenience, ease of use, security, convenience, speed etc. But real cases prove the fact that adoption factors that the previous researches present are not always critical to success to penetrate a market. For example, PayByPhone, NFC based parking payment service, successfully has penetrated to early market and grown. In contrast, Google Wallet service failed to be adopted to users despite NFC based payment method which provides convenience, security, ease of use. As shown in upper case, there remains an unexplained aspect. Therefore, the present research question emerged from the question: "What is the more essential and fundamental factor that should takes precedence over factors such as provides convenience, security, ease of use for successful penetration to market". With these cases, this paper analyzes four cases predicted on the following hypothesis and demonstrates it. "To successfully penetrate a market and sustainably grow, new payment service should find non-customer of the existing payment service and provide noble payment method so that they can use payment method". We give plausible explanations for the hypothesis using multiple case studies. Diners club, Danal, PayPal, Square were selected as a typical and successful cases in each category of payment service. The discussion on cases is primarily non-customer analysis that noble payment service targets on to find the most crucial factor in the early market, we does not attempt to consider factors for business growth. We clarified three-tier non-customer of the payment method that new payment service targets on and elaborated how new payment service satisfy them. In case of credit card, this payment service target first tier of non-customer who can't pay for because they don't have any cash temporarily but they have regular income. So credit card provides an opportunity which they can do economic activities by delaying the date of payment. In a result of wireless phone payment's case study, this service targets on second of non-customer who can't use online payment because they concern about security or have to take a complex process and learn how to use online payment method. Therefore, wireless phone payment provides very convenient payment method. Especially, it made group of young pay for a little money without a credit card. Case study result of PayPal, online payment service, shows that it targets on second tier of non-customer who reject to use online payment service because of concern about sensitive information leaks such as passwords and credit card details. Accordingly, PayPal service allows users to pay online without a provision of sensitive information. Final Square case result, Mobile POS -based payment service, also shows that it targets on second tier of non-customer who can't individually transact offline because of cash's shortness. Hence, Square provides dongle which function as POS by putting dongle in earphone terminal. As a result, four cases made non-customer their customer so that they could penetrate early market and had been extended their market share. Consequently, all cases supported the hypothesis and it is highly probable according to 'analytic generation' that case study methodology suggests. We present for judging the quality of research designs the following. Construct validity, internal validity, external validity, reliability are common to all social science methods, these have been summarized in numerous textbooks(Yin, 2014). In case study methodology, these also have served as a framework for assessing a large group of case studies (Gibbert, Ruigrok & Wicki, 2008). Construct validity is to identify correct operational measures for the concepts being studied. To satisfy construct validity, we use multiple sources of evidence such as the academic journals, magazine and articles etc. Internal validity is to seek to establish a causal relationship, whereby certain conditions are believed to lead to other conditions, as distinguished from spurious relationships. To satisfy internal validity, we do explanation building through four cases analysis. External validity is to define the domain to which a study's findings can be generalized. To satisfy this, replication logic in multiple case studies is used. Reliability is to demonstrate that the operations of a study -such as the data collection procedures- can be repeated, with the same results. To satisfy this, we use case study protocol. In Korea, the competition among stakeholders over mobile payment industry is intensifying. Not only main three Telecom Companies but also Smartphone companies and service provider like KakaoTalk announced that they would enter into mobile payment industry. Mobile payment industry is getting competitive. But it doesn't still have momentum effect notwithstanding positive presumptions that will grow very fast. Mobile payment services are categorized into various technology based payment service such as IC mobile card and Application payment service of cloud based, NFC, sound wave, BLE(Bluetooth Low Energy), Biometric recognition technology etc. Especially, mobile payment service is discontinuous innovations that users should change their behavior and noble infrastructure should be installed. These require users to learn how to use it and cause infra-installation cost to shopkeepers. Additionally, payment industry has the strong path dependency. In spite of these obstacles, mobile payment service which should provide dramatically improved value as a products and service of discontinuous innovations is focusing on convenience and security, convenience and so on. We suggest the following to success mobile payment service. First, non-customers of the existing payment service need to be identified. Second, needs of them should be taken. Then, noble payment service provides non-customer who can't pay by the previous payment method to payment method. In conclusion, mobile payment service can create new market and will result in extension of payment market.