• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.20-29
• /
• 2014

Recently, LTE is preparing to make a new leap forward LTE-A all over the world. As LTE privides high speed service, the role of mobile phones seems to change from voice to data service. According to Cisco, global mobile data traffic will increase nearly 11-fold between 2013 and 2018. Mobile video traffic will reach 75% by 2018 from 66% in 2013 in Korea. However, voice service is still the most important role of mobile phones. Thus, controllability of throughput and low BLER is indispensable for high-quality VoIP service among various type of traffic. Although the maximum AMR-WB, 23.85 Kbps is sufficient to a VoIP call, it is difficult for the LTE which can provide tens to hundreds of MB/s may not keep the certain level VoIP QoS especially in the cell-edge area. This paper proposes a new scheduling algorithm in order to improve VoIP performance after analyzing various scheduling algorithms. The proposal is the technology which applies more priority processing for VoIP than other applications in cell-edge area based on two-tier scheduling algorithm. The simulation result shows the improvement of VoIP performance in the view point of throughput and BLER.

• Geotechnical Engineering
• /
• v.10 no.3
• /
• pp.55-78
• /
• 1994

Decomposed granite soil is a Granitic Gneiss, and it is a c Korean peninsula. It is known a changed significantly when it is aim of this study is to evaluat utility of the constitutive laws. Firstly, triaxial tests were pe sites prepared by the laborato scrutinized the characteristics results were analysed and the p evaluated. Finally, the predicted Even though the origins of slight difference in the angle of pression line( A) : both soils show In the effective mean normal uniqueness of the Normal Compr The relationships between the the decomposed granite soil tier OCR is larger than 2, the stress stress(MDS) or. even thous moved below the theoretical Ros was found to coincide with the (NC) soils, the pore pressure parameter, A,, increased up to 1.3. This phenomenon might be mainly due to the effect of the particle crushing during shearing, When the OCR value approaches 7, the negative pore pressure is developed in undrained tests and the dilatancy is observed in drained tests. The predicted and the observed behavior of drained tests showed relatively good fitting with the Cam-Clay model.

• Design Convergence Study
• /
• v.14 no.6
• /
• pp.29-55
• /
• 2015

This study aimed to examine and compare housing conditions and satisfaction degree of working college students in Seoul metropolitan area, depending on their stress level from economic burden and living housing type. The interview using the questionnaire was conducted. The subjects were 199 working college students aged between 19 and 35. The two-tier cluster sampling method were used, the region and representative university within the region. The comparison of satisfaction degree per type of housing of working college students has been conducted to find 3 characteristic patterns of satisfaction degree per housing condition from the stress of preparing the fund for rent, and students with high degree of stress from arranging rent showed relatively low degree of satisfaction in most items. 6 patterns have been identified in terms of housing types, and most of the students living in the Gosiwon, the poorest condition and housing type, showed the lowest degree of satisfaction, while those residing in the officetel turned out to the most satisfied. This study gives implications of housing welfare for working college students.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.842-847
• /
• 2012

This study was conducted to estimate the greenhouse gas emissions on local government levels from 1990 to 2010 using 2006 IPCC guideline methodology. To calculate greenhouse gas emissions based on the 16 local governments, emission factor and scaling factor were used with default value and activity data came from the food, agricultural, forestry and fisheries statistical yearbook of MIFAFF (Ministry for Food, Agriculture, Forestry, and Fisheries). The total emissions in crop sector gradually decreased from 1990 to 2010 due to a decline in agricultural land and nitrogen fertilizer usage. The annual average emission of greenhouse gas was the highest in Jeonnam (JN) with 1,698 Gg $CO_2$-eq and following Chungnam (CN), Gyungbuk (GB), Jeonbuk (JB) and Gyunggi (GG). The sum of top-six locals emission had occupied 83.4% of the total emission in cropland sector. The annual average emissions in 1990 by applying 2006 IPCC guideline were approximately 43% less than the national greenhouse gas inventory by 1996 IPCC guideline. Jeonnam (JN) province occupied also the highest results of greenhouse gas emission estimated by gas types (methane, nitrous oxide and carbon dioxide) and emission sources such as rice cultivation, agricultural soil, field burning of crop residue and urea fertilizer.

• Economic Analysis
• /
• v.27 no.4
• /
• pp.70-119
• /
• 2021

This paper analyzes the changes in financial reform during the Kim Jong-un era based on North Korean literature. We find that North Korea has systematically and functionally separated the central bank from commercial banks since the Kim Jong-un era began. In addition, enterprises have been allowed to withdraw cash from bank accounts and make inter-enterprise cash payments. In other words, nowadays non-cash currencies with passive money can partially serve as active money with purchasing power. With the systematic and functional separation of the central bank and the commercial bank, the issuance of the central bank changed to a money supply method through the commercial bank, and changes in the currency distribution structure have allowed commercial bank's credit creation function to be implemented. This means that the banking system and the monetary·payment system of the socialist planned economy are changing in the way of the market economy. Reforms in the financial sector are believed to have been necessary to support changes in the economic system and to restore the function of the public financial sector. These changes have progressed in terms of the level of reform, but they are still considered similar to the period of the former Soviet Union's Perestroika or to the early period of China's reform and opening. Although North Korea's financial reform is superior in terms of enacting the banking law, it is insufficient in terms of realizing the functions of commercial banks. In addition, it is assessed that institutional constraints such as maintaining a planned economy, and the lack of confidence in public finances limit the effectiveness and development of the financial system. It should be noted that these results are based on literature published in North Korea. In other words, there is a limit in the fact that such recent changes have been carried out on a trial basis in some areas, or have been carried out in a full-scale manner with a blueprint, since Kim Jong-un's inauguration.

• Journal of Technology Innovation
• /
• v.31 no.3
• /
• pp.39-73
• /
• 2023

The field of Management of Technology(MOT) emerged in response to the need for research management within U.S. public research institutions during the 1960s. Since its inception, it has proliferated significantly, being practiced in more than 809 institutions globally and over 19 institutions in Korea, encompassing both research and educational endeavors. Particularly noteworthy is the substantial investment of government resources, primarily channeled through the Ministry of Industry since 2007, which has expeditiously established a comprehensive framework for cultivating graduate-level MOT expertise, marked by both quantitative and qualitative advancements. The educational curriculum in the realm of Korean MOT deviates from foreign counterparts through distinctive pathways, exemplified by its emphasis on industry practice-oriented educational programs, standardization and isomorphism across different schools, as well as its interconnectedness with proximate academic disciplines. This research systematically undertakes an analysis of the curriculum in Korean MOT graduate schools, thereby ascertaining its intrinsic identity and distinct attributes. In this endeavor, a comprehensive examination of eleven principal MOT textbooks(three in Korean and eight in English) is conducted to delineate the primary content of the curriculum across seven thematic domains. Moreover, the study deliberates on its differentiation from neighboring academic disciplines and the definitional attributes of MOT. Subsequently, this analysis also encompasses nine Korean MOT graduate programs, projecting the seven thematic domains onto their respective curricula. The findings illuminate that within the context of Korean graduate programs, a substantial proportion of the curriculum, amounting to 62.5%, is dedicated to facets encompassing the operational aspects of technology management within corporate contexts, technology management specific to varying industries and technologies, and collaborative endeavors between academia and industry in the form of projects and seminars. Evidently, the Korean approach to technology management education is notably geared towards the cultivation of adept practitioners capable of executing technology management functions at a mid-tier managerial level, aligned with the exigencies of regional industries. Grounded in the analysis of technology management curricula, this study extrapolates implications for the future trajectory of MOT education in Korea, encompassing a consideration of the stages of industrial development. It underscores the necessity to augment the educational curricula pertaining conceptual foundation of technology and innovation, strategic perspectives of technology and innovation, and the socio-economic context of technology management.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1165-1169
• /
• 1998

A single crystal cast blade was manufactured by CMSX 6, one of the first generarion nickel based single crystal superalloys by the selector method in a vacuum furnace. The single crystal has been grown with cooling rate of 2.5 mm/min, after pouring the molten alloy of 163$0^{\circ}C$ to the mold heated to 150$0^{\circ}C$. The cast structure could be classified into matrix (dendrite) and eutectic regions in ${\gamma}$'shape and size. The eutectic region showed higher Ti content. As the additional results of ${\gamma}$'precipitates by EPMA and CBED analysis the ${\gamma}$'size was less than 0.5~0.7$\mu\textrm{m}$, showing the chemical composition close to Ni$_3$Al of Ll$_2$ lattice structure. But ${\gamma}$'size has increased to bigger than 1.0$\mu\textrm{m}$, being near to eutectic region, changing its shape to bar or huge block types. These showed the chemical structure near to Ni$_3$Ti of D $O_{24}$ lattice structure. Therefore, ${\gamma}$'morphology of dendrite and eutectic regions depends absolutely on its chemical composition and lattice structure.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.71-84
• /
• 2003

The metallic shell of soil-steel structures are so weak in bending moment that it should sustain the applied load by the interaction of the backfill soil around the structures. The shell can be subjected to excessive bending moment during side backfilling or under live-load when the soil cover is less than the minimum value. The current design code specifies the allowable deformation and Duncan(1979) and McGrath et al.(2001) suggested the strength analysis methods to limit the moments by the plastic capacity of the shell. However, the allowable deformation is an empirically determined value and the strength analysis methods are based on the results of FE analysis, hence the experimental verification is necessary. In this study, the full-scale tests were conducted on the high-profile arch to investigate its behaviors during backfilling and under static live-loads. Based on the measurements, the allowable deformation of the tested structure could be estimated to be 1.45% of rise, which is smaller than the specified allowable deformation. The comparison between the measurements and the results of two strength analyses indicate that Duncan underestimates the earth-load moment and overestimates the live-load moment, while McGrath et al. predicts both values close to the actual values. However, as the predicted factors of safeties using two methods coincide with the actual factor of safety, it can be concluded that both methods can predict the structural stability under live-loads adequately when the cover is less than the minimum.