• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.244-247
• /
• 1999

The(Sr$\sub$0.85/Ca$\sub$0.15/) TiO$_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/SiO$_2$/Si) using RF sputtering method. The composition of SCT thin films deposited on Si substrate at room temperature is close to stoichiometry(1.102 in A/B ratio). Also, SCT thin films deposited on Pt-coated electrodes have the cubic perovskite structure and polycrystalline state. The maximum dielectric constant of SCT thin films is obtained by annealing at 600[$^{\circ}C$].The dielectric constant changes almost linearly in temperature ranges of -80~+90[$^{\circ}C$].

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.526-530
• /
• 2002

The $(Sr_{0.9}Ca_{0.1})TiO_3(SCT)$ thin films were deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method. The composition of SCT thin film deposited on Si substrate at room temperature is close to stoichiometry(1.081 in A/B ratio). The maximum dielectric constant of SCT thin film was obtained by ammealing at $600^{\cric}C$. The temperature dependence of dielectric loss showed a value within 0.02 in temperature ranges of -80 ${\sim}$ +90$^{\circ}C$. The capacitance characteristics showed a stable value within ${\pm}$4%. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films was observed at the frequency above 200kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.331-332
• /
• 2008

Couplings between electric, magnetic, and structural order parameters result in the so-called multiferroic phenomena with two or more ferroic phenomena such as ferroelectricity, ferromagnetism, or ferroelasticity. The simultaneous ferroelectricity and ferromagnetism (magnetoelectricity) permits potential applications in information storage, spintronics, and magnetic or electric field sensors. The perovskite BiFeO3(BFO) is known to be antiferromagnetic below the Neel temperature of 647K and ferroelectric with a high Curie temperature of 1043K. It exhibits weak magnetism at room temperature due to the residual moment from a canted spin structure. It is likely that non-stoichiometry and second-phase formation are the factors responsible for leakage current in BFO. It has been suggested that oxygen non-stoichiometry leads to valence fluctuations of Fe ions in BFO, resulting in high conductivity. To reduce the large leakage current of BFO, one attempt is to make donor-doped BFO compounds and thin films. In this study, (Bi1-x,Ndx)(Fe1-y,Tiy)O3 thin films have been deposited on Pt(111)/TiO2/SiO2/Si substrates by pulsed laser deposition. The effect of dopants on the phase evolution and surface morphology are analyzed. Furthermore, electrical and magnetic properties are measured and their coupling characteristics are discussed.

• 한국진공학회지
• /
• 제11권3호
• /
• pp.176-182
• /
• 2002

이온빔 스퍼터링을 사용하여 유리 기판위에 $TiO_2$ 박막을 증착하고 광학적, 구조적 특성을 분석한 후 실제 반사 방지막을 제작하였다. 박막 증착은 상온에서 실시하였으며 이온빔 전압을 1.2 kV 이온빔 전류 밀도를 200 $\mu\textrm{A}/\textrm{cm}^2$로 고정하였다. 방전가스로 아르곤과 산소 가스를 사용하였으며 $O_2$/Ar비를 변화시켜 박막을 증착하고 각 박막의 특성을 분석하였다. 증착된 박막은 비정질이었고 $O_2$/Ar비가 1일 때 화학량론적인 조성비를 나타내었다. 증착된 박막의 표면 거칠기는 7 $\AA$이내의 낮은 값을 보였으나 과량의 산소분위기에서는 그 값이 50 $\AA$이상으로 증가하였고 이로 인해 투과도가 감소하는 경향을 보였다. 증착된 $TiO_2$ 박막의 굴절률은 2.40-2.45값을 나타내었고.$O_2$/Ar 비가 0.25-1사이에서 높은 투과도를 나타내었다. 이온빔 스퍼터링으로 $SiO_2$/$TiO_2$6층 반사 방지막을 제작하여 가시 광선 영역에서 약 1%이하의 반사율 특성을 갖는 박막을 증착할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.200-201
• /
• 2007

The SBT($SrBi_2Ta_2O_9$) thin films with $Bi_2O_3$ buffer layer were deposited on Pt/Ti/$SiO_2$/Si substrate by R.F. magnetron sputtering method in order to improve the ferroelectric characteristics. In SBT thin films, the deficiency of bismuth during the process due to its volatility results in an obvious non stoichiometry of the films and the presence of secondary phases. $Bi_2O_3$ buffer layer was found to be effective to achieve the low temperature crystallization and improve the ferroelectric properties of SBT thin films. Ferroelectric properties and crystallinities of SBT thin films with various post annealing of $Bi_2O_3$ buffer layer were observed as various annealing temperature, using X-Ray Diffraction (XRD), scanning electron microscopy (SEM), Keithley 237 and HP 4192A Impedance Analyzer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.211-211
• /
• 1999

Titanium nitride (TiN) thin films have useful properties including high hardness, good electrical conductivity, high melting point, and chemical inertness. The applications have included wear-resistant hard coatings on machine tools and bearings, decorative coating making use of the golden color, thermal control coatings for widows, and erosion resistant coatings for spacecraft plasma probes. For all these applications as feature sizes shrink and aspect ratios grow, the issue of good step coverage becomes increasingly important. It is therefore essential to manufacture conformal coatings of TiN. The growth of TiN thin films by chemical vapor deposition (CVD) is of great interest for achieving conformal deposition. The most widely used precursor for TiN is TiCl4 and NH3. However, chlorine impurity in the as-grown films and relatively high deposition temperature (>$600^{\circ}C$) are considered major drawbacks from actual device fabrication. To overcome these problems, recently, MOCVD processes including plasma assisted have been suggested. In this study, therefore, we have doposited Ti(C, N) thin films on Si(100) and D2 steel substrates in the temperature range of 150-30$0^{\circ}C$ using tetrakis diethylamido titanium (TDEAT) and titanium isopropoxide (TIP) by pulsed DC plamsa enhanced metal-organic chemical vapor deposition (PEMOCVD) method. Polycrystalline Ti(C, N) thin films were successfully grown on either D2 steel or Si(100) surfaces at temperature as low as 15$0^{\circ}C$. Compositions of the as-grown films were determined with XPS and RBS. From XPS analysis, thin films of Ti(C, N) with low oxygen concentration were obtained. RBS data were also confirmed the changes of stoichiometry and microhardness of our films. Radical formation and ionization behaviors in plasma are analyzed by optical emission spectroscopy (OES) at various pulsed bias and gases conditions. H2 and He+H2 gases are used as carrier gases to compare plasma parameter and the effect of N2 and NH3 gases as reactive gas is also evaluated in reduction of C content of the films. In this study, we fond that He and H2 mixture gas is very effective in enhancing ionization of radicals, especially N resulting is high hardness. The higher hardness of film is obtained to be ca. 1700 HK 0.01 but it depends on gas species and bias voltage. The proper process is evident for H and N2 gas atmosphere and bias voltage of 600V. However, NH3 gas highly reduces formation of CN radical, thereby decreasing C content of Ti(C, N) thin films in a great deal. Compared to PVD TiN films, the Ti(C, N) film grown by PEMOCVD has very good conformability; the step coverage exceeds 85% with an aspect ratio of more than 3.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.745-750
• /
• 2000

The (S $r_{0.85}$C $a_{0.15}$) Ti $O_3$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/ $SiO_2$/Si) using RF sputtering method at various deposition temperature. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of 200~500[$^{\circ}C$]. Also, the composition of SCT thin films were closed to stoichiometry (1.080~1.111 in A/B ratio). V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature. The conduction mechanism of the SCT thin films observed in the temperature range of 25~100[$^{\circ}C$] can be divided into four regions with different mechanism by the increasing current. The region I below 0.8[MV/cm]shows the ohmic conduction. The region II between 0.9~2[MV/cm] is in proportion to J∝ $E^{1.5}$ , the region III between 2~4[MV/cm] can be explained by the Child’s law, and the region IV above 4[MV/cm]is dominated by the tunneling effect.ect.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권10호
• /
• pp.559-563
• /
• 2000

The $(Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films are deposited on Pt-coated(Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. Also the composition of SCT thin films were closed to stoichiometry(1.081∼1.117 in A/B/ ratio). The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The dielectric constant changes almost linearly in temperature ranges of -80∼+90[^${\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 2000[kHz]. The current-voltage characteristics of SCT15 thin films showed the increasing leakage current as the measuring temperature increase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.472-473
• /
• 2007

The $(Sr_{1-x}Ca_x)TiO_3$(ST) thin films are deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. Also, the composition of ST thin films were closed to stoichiometry(1.081~1.117 in A/B ratio). The dielectric constant changes almost linearly in temperature ranges of -80~+90[$^{\circ}C$]. The current-voltage characteristics of ST15 thin films showed the increasing leakage current as the measuring temperature increases.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.749-757
• /
• 2002

Chiral oxazolidin-2-one is easily prepared from D-mannitol and demonstrated to undergo highly diastereoselective alkylation reactions via lithium imide Z-enolates of its N-acyl derivatives to afford ${\alpha}-branched$ products. Evans syn and non-Evans sy n aldol products were also selectively obtained using this new auxiliary in high diastereomeric purity by simply changing the stoichiometry of TiCl4 and the nature of the amine base. Also, this new auxiliary is employed in diastereoselective Staudinger-type ${\beta}-lactam$ syntheses. Using 2-chloro-1-methylpyridinium iodide as the dehydrating agent, the reaction of auxiliary tethered acetic acid with trans imines gave the desired ${\beta}-lactams$ with cis-selectivity.