• 한국진공학회지
• /
• 제19권2호
• /
• pp.91-95
• /
• 2010

상온에서 고품질의 $TiO_2$ 박막을 제조하기 위하여 titanium isopropoxide [Ti(OCH$(CH_3)_2)_4$, TIP]와 $H_2O$을 이용한 자외선 활성화 원자층 증착(UV-enhanced atomic layer deposition: UV-ALD) 기술을 개발하였다. UV-ALD 기술은 상온에서 자체제어 표면 반응(self-limitting surface reaction)을 통해 균일하고 고품위 등방 특성을 갖는 순수한 $TiO_2$ 박막 증착이 가능하였다. ALD 반응 시 조사되는 자외선은 Si 기질 위에 우수한 접착력을 가지는 고품질의 $TiO_2$ 박막을 얻는데 효과적이었다. UV-ALD 기술은 높은 단차비(aspect ratio)를 가지는 trench 기질 위에 균일한 $TiO_2$ 박막을 증착하는 데에 적용되었다.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.253-256
• /
• 1997

Epitaxially grown Pb(Zr, Ti)O$_3$thin films were prepared on LaAlO$_3$substrates by the dipping pyrolysis process using metal naphthenates as starting materials Homogeneous Pb-Zr-Ti solutions with toluene were spin-coated onto the substrates and pyrolyzed at 50$0^{\circ}C$ Highly oriented Pb(Zr, Ti)O$_3$films confirmed by X-ray diffraction $\theta$-2$\theta$ scans were obtained by heat-treated at 75$0^{\circ}C$ in air The X-ray pole-figure analysis and reciprocal-space mapping of the resulting 0.6$\mu\textrm{m}$ films showed that the thin films comprising the c-axis oriented tetragonal phase have an epitaxial relationship with the LaAlO$_3$substrates.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ 박막은 ULSI-DRAM 즉 1-4 Gbit급 DRAM용 셀(cell) 커패시터의 새로운 유전물질로 각광받고 있다. 본 연구에서는 ICP 장비에서 $BCl_3/Cl_2/Ar$ 플라즈마로 (Ba,Sr)$TiO_3$ 박막을 식각하였다. 이때 RF power/dc bias voltage는 600W/-250V, 반응로의 압력은 10mTorr 이었다. $Cl_2/(Cl_2+Ar)$은 0.2로 고정하였고, $BCl_3$ 가스를 첨가하면서 (Ba,Sr)$TiO_3$ 박막을 식각하였다. $BCl_3$ 가스를 10% 첨가하였을 때, $480{\AA}/min$으로 (Ba,Sr)$TiO_3$ 박막은 가장 높은 식각 속도를 나타내었다. $Cl_2/Ar$가스에 $BCl_3$의 첨가 비에 따른 Cl, BCl 및 B의 라디칼 밀도를 optical emission spectroscopy(OES)에 의해 구하였다. $BCl_3$를 10% 첨가하였을 때 Cl의 라디칼 밀도가 가장 높았다. (Ba,Sr)$TiO_3$ 박막의 표면반응을 규명하기 위하여 XPS 분석을 수행한 결과 이온 bombardment 식각이 Ba-O 결합을 파괴하고 Ba와 Cl의 결합형태인 $BaCl_2$을 제거하기 위하여 필요하다. Sr과 Cl의 결합의 양은 많지 않고, Sr은 주로 물리적인 스퍼터링에 의하여 제거된다. Ti와 Cl은 화학적으로 반응하여 $TiCl_4$ 결합형태로 용이하게 제거된다. 식각후 단면사진을 SEM을 통해 본 결과 식각단면이 약 65~70$^{\circ}$ 정도였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.82-86
• /
• 2000

Humidity sensors using $TiO_2$ thin films were fabricated on the multi-electrode device by Sol-Gel method and their wettability, surface potential decays and humidity sensing characteristics were investigated. Contact angle of thin films was $28^{\cic}\;at\; 400^{\circ}C$ and surface potential decayed rapidly at $400^{\circ}C$. The specimen showed best humidity sensing characteristics at $400^{\circ}C$. From the results, they were confirmed that humidity sensing characteristics of thin films have connection with contact angle and surface potential decays.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.200-203
• /
• 2003

Ferroelectric europium-substitution $Bi_4Ti_3O_{12}$ thin films were fabricated by spin-coating onto a Pt/Ti/$SiO_2$/Si substrate. The $Bi_{3.25}Eu_{0.75}Ti_3O_{12}$ (BET) films have polycrystalline structure annealed at 700 C. We investigated that the influence of $Bi_4Ti_3O_{12}$ thin films by substituting for Bi ions with Bi ions using X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). From the XPS measurement, it was suggested that the stability of the metal-oxygen octahedral should be related to substitute for Bi ions with Eu ions at annealed $800^{\circ}C$. The BET thin films showed a large remanent polarization (2Pr) of $60.99C/cm^2$ at an applied voltage of 10 V. The BET thin films exhibited no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 50 kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 1999

In this paper, $Ba_{0.5}$Sr$_{0.5}$TiO$_3$ thin-films were prepared on Pt/Ti/Si0$_2$/Si substrates by RF magnetron sp-uttering method. We investigated electric and dielectric properties of BST thin-films with various ann-ealing temperature using in-sute RTA. Deposition conditions of BST films were set substrate temperat-ure, 30$0^{\circ}C$ and working gas ratio, Ar:O$_2$=90:10. After BST films deposited, we fabricated a capacitor of MIM structure with Al top electrode for measurement. Post-annealing using RTA performed at 40$0^{\circ}C$, $600^{\circ}C$, 80$0^{\circ}C$ for 60 sec, respectively. Also we exacted crystallization and composition of BST thin-films by XRD analysis. In measurement result, this capacitors showed a dielectric constant of about 200 at 1MHz and leakage current density of 5$\times$10$^{-8}$ A/$\textrm{cm}^2$ at 1.5V Microstructure of BST thin-films exhibited effective quality in low-temperature annealed 71ms than high-temperature annealed 71ms.s.s.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.820-824
• /
• 2014

TiNOx multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. 4 multi-layers of $TiO_2$/TiNOx(LMVF)/TiNOx(HMVF)/Ti/substrate have been prepared with ratio of Ar and ($N_2+O_2$) gas mixture. $TiO_2$ of top layer is anti-reflection layer on double TiNOx(LMVF)/TiNOx(HMVF) layers and Ti metal of infrared reflection layer. In this study, the crystallinity and surface properties of TiNOx thin films were estimated by X-ray diffraction(XRD) and field emission scanning electron microscopy(FE-SEM), respectively. The grain size of TiNOx thin films shows to increase with increasing sputtering power. The composition of thin films has been investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The TiNOx multi-layer films show the excellent optical performance beyond 9% of reflectance in those ranges wavelength.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.933-938
• /
• 2002

(Ba,Sr)TiO$_{4}$ (BST) thin films on Pt/Ti/SiO$_{2}$/Si substrates were deposited by a sol-gel method and the etch characteristics of BST thin films have been investigated as a function of gas mixing ratio. The maximum etch rate of the BST films was 440 $AA$/min under such conditions as: CF$_{4}$(CF$_{4}$＋Ar) of 0.2, RF-power of 700 W, DC-bias voltage of -200 V, pressure of 15 mTorr and substrate temperature of 30 $^{circ}C$. The selectivities of BST to Pt, SiO$_{2}$ and PR were 0.38, 0.25 and 0.09, respectively. In the XPS (X-ray photoelectron spectroscopy) analysis, Barium (Ba) and Strontium (Sr) component in BST thin films formed low volatile compounds such as BaFx, SrFx, which are forms by the chemical reaction with F atoms and is removed by Ar ion bombardment. Titanium (Ti) is removed by chemical reaction such as TiF with ease. The result of secondary ion mass spectrometry (SIMS) analysis confirmed the existence of the BaFx, SrFK, TiFx.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.475-479
• /
• 2004

$TiO_2$ thin films were grown on Si (100) substrates by atomic layer deposition using $[Ti(OPr^i )_2(dmae)_2]$ and water as precursors. The thickness, chemical composition, crystalline structure, and morphology of the deposited films were investigated by transmission electron microscopy, UV spectrometry, X-ray photoelectron pectroscopy, X-ray diffraction, and atomic force microscopy. The results show that $TiO_2$ ALD using $[Ti(OPr^i )_2(dmae)_2]$ as a precursor is self-controlled at temperatures of 100-300$^{\circ}C$. At the growth temperatures below 300$^{\circ}C$, the surface morphology of the $TiO_2$ films is smooth and uniform. The $TiO_2$ film was grown with a preferred orientation toward the [101] direction at 400$^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권2호
• /
• pp.132-137
• /
• 1996

Pb(Zr$_{x}$Ti$_{1-x}$ )O$_{3}$ solutions prepared by sol-gel processing with different Zr/Ti ratio were coated on Pt/SiO$_{2}$/Si substrates using spin coating method. Coated films were annealed by rapid thermal annealing at 650.deg. C for 20sec to fabricate Pb(Zr, Ti)O$_{3}$ ferroelectric thin films. Electrical properties of the films such as dielectric constant and loss, ferroelectric hysteresis, fatigue, switching time, and leakage current were measured. Hysteresis of the films with different Zr/Ti ratio yield Pr ranging 10-21.mu.C/cm$^{2}$, E$_{c}$ ranging 37.5-137.5kV/cm. Hysteresis curve was changed from square-type to slim type according to increasing Zr contents. Switching time was faster than 180ns, and leakage current was about 20.mu.A/cm$^{2}$. The film underwent above 10$^{8}$ cycles of reversed polarization showed fatigue with increased coercive field and decreased remnant polarization.tion.