• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.202-202
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.50-50
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.38-44
• /
• 2002

Dispersion stability of nano-sized rutile TiO$_2$powder with acicular typed primary particle produced by homogeneous precipitation process at low temperatures was studied in aqueous and non-aqueous media in the presence of various electrolytes. The zeta potential measurements have shown that the addition of electrolytes to aqueous and non-aqueous dispersion media leads to charge reversal on TiO$_2$particle surface. The electrostatic repulsive forces acting on between TiO$_2$particles dispersed in non-aqueous media were found to be significantly greater than that in aqueous media, which relate closely to the physical properties of the organic solvents, such as viscosities and dielectric constants. The pH values, the concentration of electrolytes and the valence of the ions have changed greatly the surface potential of TiO$_2$ particles and have governed the dispersion behavior of TiO$_2$particles virtually.

• Clean Technology
• /
• v.8 no.4
• /
• pp.173-180
• /
• 2002

As a primary material for MLCC, $BaTiO_3$ particles coated with two additives in a core-shell structure were prepared in this study. This composite powder can not only reduce the VOC emission during MLCC manufacture but also increase the density and reliability of electronic products. The additives were $Y_2O_3$ and $MnCO_3$, whose composition information was obtained from domestic companies. It was observed that the surface of $BaTiO_3$ particles was uniformly as well as simultaneously coated by those two materials via urea-decomposition reaction over $70^{\circ}C$ as the reaction temperature. Elemental analysis indicated that the measured content of each additve was quite close to the designated value. The effect of polymeric dispersant such as PVP, on the coating characteristics was not as significant as expected.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2005.04a
• /
• pp.13-14
• /
• 2005

• Journal of Powder Materials
• /
• v.17 no.5
• /
• pp.409-414
• /
• 2010

Titanium dioxide ($TiO_2$), which is one of the most basic materials in our daily life, plays a key role for environment purification. We synthesized $TiO_2$ nanoparticles by the hydrolysis reactions of titanium tetraisopropoxide using $HNO_3$ as a peptizing agent or $CH_3COOH$ as a chelating agent in the sol-gel method. The powder consisted of a rod shape or a spherical shape according to the concentration and kind of acid. The physical properties of $TiO_2$ nanoparticles were investigated with X-ray diffraction, SEM, BET analysis, and UV-Vis spectrophotometer.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.380-387
• /
• 2001

140$0^{\circ}C$ 환원 분위기(질소-수소) 조건에서 열처리하여 반도성 SrTiO$_3$하소분말을 제조하였다. 하소분말을 이용하여 135$0^{\circ}C$에서 2시간동안 상압 소결하여 소결체를 제조하였으며, 이때 소결 분위기에 따른 소결체 입계의 전기적 특성을 고찰하였다. 이들 소결체는 전형적인 바리스터 특성을 나타내었으며, 특히 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라서 소결체의 문턱 전압, 입계 비저항 그리고 입계 전위 장벽은 430V/cm, 10MΩ.cm 그리고 2.0$\times$$10^{-3}$eV로부터 1000V/cm 이상, 240 MΩ.m 그리고 1.1eV로 변하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.418-424
• /
• 2000

Pure $TiO_2$and 10 mol % Pb-doped $TiO_2(Pb_xTi_{1-x}O_2$(x = 0.1)) powder and thin films have been prepared by the sol-gel method. Titanium isopropoxide and ethanol are used for pure $TiO_2$, lead acetate trihydrate and titanium triisopropoxide monoacethylacetonate are used for Pb-doped $TiO_2$, respectively. Films are coated on p-type Si(100) wafer and ITO glass substrates by the sol-gel spin-coating method. The powder and multi-coated films are annealed at different temperature (400~$800^{\circ}C$) for phase formation and crystallization. TGA/DTA, XRD analysis, SEM and UV-visible transmission spectroscopy have been used to study the characteristics of the powder and films. XRD results show that the films are polycrystalline, anatase type and oriented predominantly to the A(101) plane. A slight shift in the d-spacing for the Pb-doped film indicates the incorporation of the Pb into $TiO_2$lattice. A shift of the absorption wavelength in the transmission spectrum towards longer wavelength has been observed about $Pb_xT_{1-x}O_2$(x = 0.1) thin film, which indicates a decrease in the bandgap of $TiO_2$upon Pb-doping.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1150-1158
• /
• 2000

반도성 SrTiO$_3$분말을 이용하여 상압에서 제조된 소결체의 소결 분위기에 따른 소결체 입계의 결함 화학 및 전기적 특성을 고찰하였다. 소결 분위기를 질소-수소, 질소, 공기로 변화시킴에 따라서 입계에서 O/(Sr+Ti)의 비는 1.6로부터 2.1로 증가하였으며, 또한 입계의 과잉 음전하층에서 전하 밀도는 1C/$ extrm{cm}^2$로부터 1.26C/$\textrm{cm}^2$로 증가하였다. 소결체의 문턱 전압, 입계 저항 그리고 입계 전위 장벽은 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라 6.40-1000 V/cm, 2.70-3050 kΩ 그리고 0.08-10.9 eV로 각각 증가하였다.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.50-50
• /
• 1988

The controlled Ti(CO2H5)4 hydrolysis reactions for the synthesis of Spherical Monodispersed Titania powders are described. Increasing the concentration of TEOT and the molar ratio of water to TEOT in alcohol solution decrease the reaction time and the particle size. The reaction time is delalyed by increasing the chain length and the number of carbon branches of alcohol as a solvent. The prepared powders with an average diameter of 0.8μ and the spherical monodispersed transfer to Rutile phase at 550℃.