• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.121-127
• /
• 1994

The capability for application of rf magnetron sputterred and post annealed BaTiO$_{3}$ thin films in dielectrics AC drived TFELD(thin film electroluminescent device) was investigated. The dielectric constant of the thin films slightly increased up to about 25 with increase fothe post annealing temperature in the range of 210$^{\circ}C$-480$^{\circ}C$. The dielectric loss was about 0.005-0.01 except for the high frequency range above 100kHz and nearly independent on post annealing temperature. The BaTiO$_{3}$ thin film used for TFELD was annealed at 480.deg. C and Si$_{3}$N$_{4}$ thin film was inserted between BaTiO$_{3}$, lower dielecrics and ZnS:Mn, phosphor layer for stable driving of the device and for fear of interdiffusion. Regardless of the frequency of the applied sine wave voltage, the threshold voltage of the prepared TFELD was 65volt and saturated brightness was about 3000cd/m$^{2}$ at 130volt(2kHz sine wave), 65volt above V$_{TH}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.287-287
• /
• 2010

휴대용 기기의 사용이 증가하면서 배터리의 고용량화와 소형화가 요구되고 있다. 특히 내시경 캡슐과 같은 의료용 센서 기기에서는 소형화가 매우 중요하며 인체에 해로운 액체전해질이 들어가지 않는 것이 바람직하다. 최근 무선센서, RFID 태그, 스마트 카드 등을 위하여 고체전해질을 사용하는 박막 마이크로 배터리가 개발되고 있으나, 에너지 저장용량이 작아 응용분야가 제한적이다. Si wafer 위에 형성된 고단차의 3차원 구조 위에 박막 배터리를 형성한다면 표면적 증가에 의해 에너지 저장용량 역시 크게 증가할 것이며, Si 기반의 반도체, 디스플레이, 태양전지 등과 쉽게 집적이 가능할 것이다. 본 연구에서는 펄스 레이저 증착법(Pulsed Laser Deposition)으로 리튬 배터리의 cathode 물질인 $LiCoO_2$를 박막으로 제조하고 그 특성을 연구하였다. 펄스 레이저 증착법은 저온 증착이 가능하고 타겟 물질과 같은 조성의 박막을 증착하는 것이 용이한 장점이 있다. Pt, TiN 등의 기판 위에 $LiCoO_2$ 박막을 증착하고 증착 온도와 산소($O_2$) 분압이 박막의 조성, 미세구조, 결정성, 그리고 전하저장용량에 미치는 영향을 고찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.74-74
• /
• 2009

Titanium nitride has been used as hardmask for semiconductor process, capacitor of MIM type and diffusion barrier of DRAM, due to it's low resistivity, thermodynamic stability and diffusion coefficient. Characteristics of the TiN film are high intensity and chemical stability. The TiN film also has compatibility with high-k material. This study is an experimental test for better condition of TiN film etching process. The etch rate of TiN film was investigated about etching in $BCl_3/Ar/O_2$ plasma using the inductively coupled plasma (ICP) etching system. The base condition were 4 sccm $BCl_3$ /16 sccm Ar mixed gas and 500 W the RF power, -50 V the DC bias voltage, 10 mTorr the chamber pressure and $40\;^{\circ}C$ the substrate temperature. We added $O_2$ gas to give affect etch rate because $O_2$ reacts with photoresist easily. We had changed $O_2$ gas flow rate from 2 sccm to 8 sccm, the RF power from 500 W to 800 W, the DC bias voltage from -50 V to -200 V, the chamber pressure from 5 mTorr to 20 mTorr and the substrate temperature from $20\;^{\circ}C$ to $80\;^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.60.2-60.2
• /
• 2011

본 연구에서는 Indium-free 및 gallium-free 기반의 산화물 TFT를 제작하기 위해 n-type $TiO_2$ 반도체 기반의 thin film transistor ($Mo/TiO_{2-x}/SiO_2/p+\;+Si$)를 oxygen deficient black $TiO_{2-x}$ 타겟을 이용하여 DC magnetron sputtering 공법으로 제작하고 그 특성을 분석하였다. DC magnetron sputtering 공법으로 성막된 $TiO_{2-x}$ semiconductor의 전기적, 광학적, 화학적 결합 에너지 및 구조적 특성 분석을 위해 semiconductor parameter analyzer (Aglient 4156-C), UV/Vis spectrometer, X-ray Photoelectron Spectroscopy, Transmission Electron Microscopy를 각각 이용하여 분석하였으며 이를 RTA 전/후 특성 비교를 통하여 관찰하였다. $TiO_{2-x}$ TFT의 소자 특성은 RTA 열처리 전/후 전형적인 insulator 특성에서 semiconductor 특성으로 변화되는 것을 관찰할 수 있었으며, 최적화된 열처리 공정에서 filed effect mobility 0.69 $cm^2$/Vs, on to off current ratio $2.04{\times}10^7$, sub-threshold swing 2.45 V/decade와 Vth 10.45 V를 확보할 수 있었다. 또한 RTA 열처리 후 밴드갭이 3.25에서 3.41로 확장되는 특성을 나타내었다. 특히 RTA 열처리 후 stoichiometric $TiO_2$ 상태와는 다른 $Ti^{2+}$, $Ti^{3+}$, $Ti^{4+}$ 등의 다양한 oxidation states가 관찰되었으며 이러한 oxidation states를 $TiO_{2-x}$ 박막에서의 oxygen deficient 상태와 연관시킴으로써 oxygen vacancy의 n-type dopant로의 거동을 확인하였다. $TiO_2$ 채널 기반의 TFT 특성을 통하여서 indium free 또는 gallium free 산화물 채널로써의 가능성을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.374-378
• /
• 1999

Thin Films of BaYTiO system were Prepared by frequency (rf)/dc magnetron sputtering method. The preparation of target were accomplished by the mixed oxide method, and their composition consisted of the $Ba_{0.997}$ $Y_{0.003}$Ti $O_3$+0.5 $SiO_2$+x $M_{n}$O(x=0, 0.073, 0.1, 0.127, 0.154). The average particle size of (Ba,Y)Ti $O_2$ system ceramics with Mn $O_2$ additives increases as the amount of MnO additives increase and reaches the maximum grain growth when the amount of MnO is 0.127(mol%).).).).

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.101-110
• /
• 1998

큰 누설전류를 개선하고 누설전류 기구를 해석하기 위해 Pt/Ti/ SiO2/Si 기판상에서 2단계 sputtering 하여 PZT박막을 형성시켰다. 상온층과 perovskite의 두층으로 이루어진 PZT박막은 누설전류가 개선되었다. 특히 20nm의 상온층을 포함하는 PZT 박막은 유전상수 와 누설전류 특성이 모두 탁월한 것으로 나타났다. 이와 같은 조건에서 PZT 박막의 누설전 류 기구는 bulk 지배하는 기구로 바뀌었다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.279-285
• /
• 2003

Ferroelectric S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$ thin films with 200 nm thicknesses were deposited on Pt/Ti $O_2$/ $SiO_2$/Si Substrates by a sol-gel method. In these experiments, Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$ and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. After UV-irradiation and RTA processes, the remanent polarization value (2 $P_{r}$) of SBTN thin films with annealed at $650^{\circ}C$ was 8.49 and 11.94 $\mu$C/$\textrm{cm}^2$ at 3 V and 5 V, respectively.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.163-167
• /
• 2004

TiAl(La)N thin films were oxidized in vacuum of about 7 Pa to reduce the oxidation of WC-Co as a substrate. The oxidation rate constants of the thin films were quantified by an assumption of parabolic oxidation. Increasing AI content significantly decreased the parabolic oxidation rate constant. A simultaneous addition of AI and La was more effective to reduce the oxidation rate. The parabolic oxidation rate constant of $Ti_{0.66}$ $Al_{0.32}$ $La_{ 0.02}$N thin film at 1273 K showed about ten times lower than that of TiN. The addition of a small amount of La with Al induced the preferential formation of dense $\alpha$ $-Al_2$$O_3$ film in oxide film, leading to the abrupt reduction of oxidation rate.

• Solar Energy
• /
• v.9 no.1
• /
• pp.14-21
• /
• 1989

Preparation of $TiO_2$ Film by the Dip-coating Method and its Application to photo-electrochemical Electrodes. $TiO_2$ film of n-type semiconductor has been of great interest as a material for solar energy conversion. For its practical application, the dip-coating method has been applied to prepare $TiO_2$ (anatase) film on the nesa glass substrate. Films up to about $1.8{\mu}m$ in thickness can be obtained by repeating the operation, dipping $\to$ pulling up $\to$ drying $\to$ heating at $500^{\circ}C$ for 10 minute. Heating temperature at $500^{\circ}C$ was adopted to convert $TiO_2$ gels into $TiO_2$ crystalline films. The $TiO_2$ films showed the maximum photocurrent ($14mA/cm^2$) at the film thickness of about $1.8{\mu}m$. It was also found that the additional heating at $500^{\circ}C$ for about 20 minutes improved remarkably the photo current of the $TiO_2$ films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.189-193
• /
• 1997

(S $r_{0.85}$/C $a_{0.15}$)Ti $O_3$(SCT) thin films at various deposition temperature and rf power were grown by rf magnetron sputtering method on optimized Pt-based electrodes (Pt/TiN/ $SiO_2$/Si). The crystallinity of the films increases with increasing deposition temperature. SCT thin film is depend on the surface morphology and crystallinity of Pt films for bottom electrode. Dielectric constant of (S $r_{0.85}$C $a_{0.15}$)Ti $O_3$ thin films deposited on Si wafer substrate are larger with the increase of deposition temperature and gain size.in size.