• 대한치과교정학회지
• /
• 제28권1호
• /
• pp.123-133
• /
• 1998

TiN ion-plating된 Co-Cr 선재(.016", .016"x.022")와 ion-plating되지 않은 선재(.016", .016"x.022")를 이용하고, 3 가지 종류의 브라켓(TiN ion-plating된 금속 브라켓, 세라믹 브라켓 및 플라스틱 브라켓)을 대상으로 마찰실험을 행하고, 거기에서 얻어진 마찰 특성곡선과 곡선으로부터 구한 최대 정지마찰력, 그리고 선재와 브라켓의 표면양상을 주사전자현미경으로 관찰하여 TiN ion-plating의 효과를 검토한 결과 다음과 같은 결론을 얻었다. $\cdot$3가지 종류의 브라켓에 TiN ion-plating된 선재를 사용한 경우의 마찰력은 TiN ion-plating되지 않은 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$3가지 종류의 브라켓에 원형 선재를 사용한 경우의 마찰력은 각형 선재를 사용한 경우의 마찰력보다 각각 통계학적으로 유의성있게 낮았다(p<0.05). $\cdot$원형 선재를 사용한 경우 TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$각형 선재를 사용한 경우 전반적으로 원형 선재를 사용한 경우보다 선재 및 브라켓 슬롯의 표면이 더욱 거친 양상을 나타내었다. $\cdot$TiN ion-plating된 원형 선재를 사용한 경우 정지마찰력과 운동마찰력의 차는 별로 없었으나 TiN ion-plating된 각형 선재를 사용한 경우 정지마찰력은 운동마찰력보다 다소 높았다. $\cdot$TiN ion-plating되지 않은 선재를 사용한 경우가 TiN ion-plating된 선재를 사용한 경우에 비해 정지마찰력이 운동마찰력보다 휠씬 높았다.

• 대한치과교정학회지
• /
• 제23권3호
• /
• pp.327-340
• /
• 1993

The purpose of this study was to estimate the possibility of practical application of TiN ion-plating method on orthodontic appliances. TiN was coated on the surface of orthodontic stainless steel roll band by means of ion-plating method, and colorimetric properties of its obtained TiN film were investigated by using color analyzer. Also its corrosion and discoloration properties were compared with those of non ion-plated stainless steel roll band by using immersion test, which was done in 1N HCl solution for 10 days. Both weight changes and surface corrosion appearances of specimens for each day were respectively investigated by using electronic weighing machine and SEM(Scanning Electron Microscope). The discoloration degress of TiN-coated specimens immersed in 1N HCl solution were investigated by using color analyzer and then judged by N.B.S.(National Bureau of Standard) Unit. The results of this study were summarized as follows. o TiN ion-plated films showed the hue of 5Y, the value of 7, and the chroma of 3 by Munsell notations. o The weight losses and surface changes of TiN ion-plated specimens immersed in 1N HCl solution were less than those of non ion-plated specimens. It was shown, therefore, that the corrosion resistance was significantly improved by TiN ion-plating. o The discoloration degrees of non ion-plated specimens were too significant to be examined by color analyzer, while those of TiN ion-plated specimens were slight when judged by N.B.S. Unit. It was also apparent, therefore, that the anti-discoloration property was significantly improved by TiN ion-plating.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.7-16
• /
• 1991

To estimate the possibility of the application of TiN ion-plating to the orthodontic appliance, colorimetric properties, and characteristics of ion-plated film as well as adhesive strength of TiN film to the substrate and mechanical properties of ion-plated orthodontic appliance were investigated. The obtained results were as follows: 1) TiN ion-plated film had the colorimetric properties which were the hue of about 2.5 Y, the brightness of about 6, and the chroma of about 4 by the standard color chip of JIS. 2) TiN ion-plated film was $2{\mu}m$ in thickness and its deposition pattern was rather irregular. 3) TiN phase was confirmed on the X-ray diffraction pattern. 4) Critical load for delamination of ion-plated film from stainless steel band was 10N. 5) Tensile and yield strength of ion-plated specimen was increased about 10Kg $f/mm^2$, while elongation was decreased $1\%$ compairing to the values of the non ion-plated specimen.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.115-125
• /
• 2000

TiN films were deposited onto Stellite 6B alloy (Co base) by the reactive magnetron sputter ion plating. As the bias increases, TiN film changes from columnar structure to dense structure with great hardness and smooth surface due to densification and resputtering by ion bombardment. The content of oxygen and carbon impurities in the TiN film decreases greatly when the substrate bias is applied. The preferred orientation of the TiN films changes from (200) to (111) with decreasing $N_2$/Ar ratio, and from (200) to (111) and then (220) with increasing the substrate bias. The change of the preferred orientation is discussed in terms of surface energy and strain energy which are related to the impurity contents and the ion bombardment damage. The hardness of the TiN film increases with increasing compressive stress generated in the film by virtue of ion bombardment. It becomes as high as up to 3500kgf/mm$^2$ when an appropriate substrate bias is applied.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.157-171
• /
• 1997

TiN ion-plating이 교정용 브라켓의 접착강도에 미치는 영향을 알아보기 위하여 세 종류의 서로 다른 기저면형태를 가지는 스테인레스 스틸제의 브라켓을 선택하고, TiN ion-plating 된 브라켓과 ion-plating 되지 않은 브라켓을 치아에 접착시켰을 때 초기 및 장기접착강도, 접착계면의 주사전자현미경 관찰, 파단면의 주사전자현미경 관찰을 비교 분석하여 다음과 같은 결론을 얻었다. ${\cdot}$ TiN ion-plating을 하지 않은 경우 24 시간 후의 접착강도는 Micro-Loc형이 $5.89{\pm}1.77MPa$, Foil Mesh형이 $4.27{\pm}1.12MPa$, Undercut형이 $2.64{\pm}0.58MPa$로 Micro-Loc형 이 가장 높았고, 그 다음이 Foil Mesh형 그리고 Undercut 형의 순으로 나타났다(P<0.05). ${\cdot}$ TiN ion-plating시 24시간 투의 접착강도는 Micro-Loc형이 $6.26{\pm}1.51MPa$, Foil Mesh형이 $7.45{\pm}2.01MPa$, Undercut형 이 $2.93{\pm}0.84 MPa$로 ion-plating 하지 않은 경우와 달리 Foil Mesh형이 Micro-Loc형보다 오히려 높게 나타났고, Undercut형이 역시 가장 낮은 접착강도를 나타내었다(P<0.05). Ion-plating 유무에 따른 24시간 후의 접착강도는 3가지형 모두에서 ion-plating시 증가하였으나 Foil Mesh형에서만 유의한 증가가 있었다(P<0.001). ${\cdot}$ 장기침적시 ion-plaling의 유무에 관계없이 전반적으로 초기(1일)접착강도보다 증가하였으며 접착력의 안정성을 나타내었다. ${\cdot}$ 접착계면의 주사전자현미경 관찰 결과 브라켓 기저면의 형태나 ion-plating 유무에 관계 없이 레진이 브라켓 기저면으로 잘 퍼져들어가 브라켓과 치아와의 사이에 견고한 접착면을 나타내었고, 장기침적의 경우도 같은 양상을 나타내었다. ${\cdot}$ 파단면의 주사전자현미경 관찰에서는 다양한 파괴 양상이 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 창립10주년 제20회 학술발표회
• /
• pp.191-192
• /
• 2001

• 대한치과교정학회지
• /
• 제23권4호
• /
• pp.671-691
• /
• 1993

To estimate the possibility in the application of TiN ion-plating to the orthodontic appliance, this study investigated frictional force and frictional coefficient between non-ionplated and TiN ion-plated to the orthodontic appliance. The obtained results were as follows : 1. For each group, the frictional force between metal bracket and arch wire in the wet condition was exhibited lower than that in the dry condition. 2. In the dry condition, the frictional force was lowest with fourth group, and it increased in the order of the 3rd, 1st, and 2nd group. Same situation happened in the wet condition. 3. Experimental results using ceramic & plastic bracket showed that group B was lower than group A, and group D was similar to group C. 4. The surface texture after experiment showed that the scratch due to a friction with bracket was observed in an arch wire of dry contition. Also the surface of bracket was rougher than before. 5. We observed that a specimen surface processed with the TiN ion plating was smoother than that of without the TiN ion plating. 6. The surface texture of a metal bracket and an arch wire in the wet condition was observed smoother than that in the dry condition. 7. In the dry condition, the friction coefficient of each specimen was very similar to each other, but in the wet condition, the friction coefficient of specimen processed with the TiN ion plating showed lower values.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.401-406
• /
• 2005

In this paper, both effect of TiN-coating and effect of temperature in TiN-coating by arc ion plating on surface characteristics of TiN coated SKH51 steel are investigated by experiments. Hardness, surface roughness, TiN coating thickness and adsorption force are measured in order to evaluate the effects. For evaluation of the experimental data, the two-way ANOVA method is used. It is concluded that the furnace temperature in the rang of $400^{\circ}C\~500^{\circ}C$ in AIP processing has very little influence on the TiN coating of the SKH51 steels.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.97-103
• /
• 2006

In this paper, effect of temperature in TiN-coating by arc ion plating on surface characteristics of a TiN coated high speed steel is investigated by experiments. Hardness, surface roughness, TiN-coating thickness and adsorption force are measured in order to evaluate the effects. For evaluation of the experimental data, one-way ANOVA method is used. It is concluded that the furnace temperature in the range $400^[\circ}C\~500^{\circ}C$ in AIP processing has a little influence on the TiN coating of the SKH51 steels.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1904-1911
• /
• 2003

In order to determine the wear properties of AIP (Arc Ion Plating) deposition, wear process was evaluated by using a Falex test machine. Also, in order to determine the effects of coating material on the wear process, TiC, TiN, and TiCN coatings of thickness about 5 $\mu\textrm{m}$∼6 $\mu\textrm{m}$ coated by Arc ion plating deposition method were tested. The wear property was determined under a dry sliding condition as a function of the applied load, sliding distance, sliding velocity and temperature. The results show that when wear of the coating-layer occurred, specific wear amount increased with the wear rate. At initial state, the wear rate rapidly increased, but it gradually reduced as the velocity increased. Also, when raising the temperature, the wear rate increased in the order of TiCN, TiN and TiC due to the frictional heat.