• 한국수산과학회지
• /
• 제17권5호
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• Journal of Korean Dental Science
• /
• 제11권2호
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• 한국작물학회지
• /
• 제39권1호
• /
• pp.73-78
• /
• 1994

풋옥수수로 이용되는 찰옥수수 및 초당옥수수의 품질에 관련된 각종 특성을 검토하고 이를 신품종육성의 기초자료로 활용하고자 본시험을 수행하여 얻어진 결과를 요약하면 다음과 같다. 1. 이삭의 발달은 출사 22-24일을 전후로 그 길이가 결정되는 것으로 나타났으며 종실의 발달에 있어 초당옥수수는 길이가 찰옥수수는 두께의 발달이 현저하였다. 2. 출사후 종실의 수분함량은 찰옥수수가 초당옥수수에 비해 급격히 감소되었고 종실의 경도 및 식미와 부의 상관을 나타냈다. 3. 종피의 두께는 출사 24일 이후 초당옥수수의 변화는 작았으나 찰옥수수는 지속적인 증가를 나타냈으며 종실의 경도에 영향을 미치는 요인이었다. 4. 가용성 고형물은 찰옥수수의 총당함량과의 정의 상관을 나타냈으나 초당옥수수는 유의성이없었고 식미와도 관련이 적어 맛의 평가기준에 부적합 한 것으로 판단되었다. 5. 종실의 경도는 찰옥수수의 경우 식미와 가장 밀접한 관계를 맺고 있는 요인으로서 생육후기로 갈수록 급격한 증가를 보였던 반면 초당옥수수는 변화가 미미하였으며 총당 및 가용성 고형물과 부의 상관을 나타냈다. 6. Glucose 및 Fructose는 초당옥수수 및 찰옥수수 모두 생육초기에 높았고 식미 및 Sucrose함량과 부의 상관을 나타냈으며 초당옥수수는 출사 28일(11.8%) 이후 감소되었으나, 찰옥수수는 출사 24일(3.3%) 이후 안정적인 변화를 보였다. 7. 찰옥수수는 종실의 경도가 초당옥수수는 당의 함량이 좌우하는 요인인 것으로 나타났으며 초당옥수수는 출사후 26∼30일에, 찰옥수수는 출사 28일 이후의 것이 높은 식미반응을 보였다..6%가 저하되었으며 모든 경우 유의하게 선발효과가 있었다.에 좋은 특성을 가진 품종으로 생각된다. 8. 각 품종내 피의 생육은 경수외에는 유의성이 인정되지 않아 대체로 파종후 35일까지는 벼 품종들과 피와의 경합은 크지 않았던 것으로 사료된다./TEX>는 큰 영향이 없음을 알 수 있었다.다.e 및 free fatty acid) 는 13.3～17.4%로 나타났다.로 빠른 시일에 집중적인 연구가 필요하다고 본다.다. 4. 저온저장(4$^{\circ}C$, RH 50%)한 벼는 2년반 저장한 벼도 밥맛의 변화가 거의 없었다. 5. 1988년산 및 1989년산 일반계를 10분도와 12분도로 도정하였을 때 도정도에 따른 밥맛의 차이는 없었다.X>$CoO_x$는 $Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$와 $CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다. 나타냈고, 골격근과 눈 조직에서 피루브산에 대한 LDH의 친화력이 상당히 크므로 LDH가 혐기적 조건에서 효율적으로 기능을 하는 것으로 사료된다.5)

• 한국재료학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2012

Presently, the most promising family of lead-free piezoelectric ceramics is based on $K_{0.5}Na_{0.5}NbO_3$(KNN). Lithium, silver and antimony co-doped KNN ceramics show high piezoelectric properties at room temperature, but often suffer from abnormal grain growth. In the present work, the $(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$ component, which has relaxor ferroelectric characteristics, was doped to suppress the abnormal grain growth. To investigate this effect, Lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3-x(Ba_{0.85}Ca_{0.15})(Ti_{0.88}Zr_{0.12})O_3$[KNLN-AS-xBCTZ] piezoelectric ceramics were synthesized by ball mill and nanosized-milling processes in lead-Free $0.95(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}NbO_3-(0.05-x)AgSbO_3$ in order to suppress the abnormal grain growth. The nanosized milling process of calcined powders enhanced the sintering density. The phase structure, microstructure, and ferroelectric and piezoelectric properties of the KNLN-AS ceramics were systematically investigated. XRD patterns for the doped and undoped samples showed perovskite phase while tetragonality was increased with increasing BCZT content, which increase was closely related to the decrease of TO-T. Dense and uniform microstructures were observed for all of the doped BCZT ceramics. After the addition of BCTZ, the tetragonal-cubic and orthorhombic-tetragonal phase transitions shifted to lower temperatures compared to those for the pure KNNL-AS. A coexistence of the orthorhombic and tetragonal phases was hence formed in the ceramics with x = 0.02 mol at room temperature, leading to a significant enhancement of the piezoelectric properties. For the composition with x = 0.02 mol, the piezoelectric properties showed optimum values of: $d_{33}$ = 185 pC/N, $k_P$ = 41%, $T_C=325^{\circ}C$, $T_{O-T}=-4^{\circ}C$.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.6-11
• /
• 2012

Sputter 방식으로 증착된 구리 seed 층(구리 seed/Ti/Si) 위에 형성된 오염물 제거과정을 이해하기 위하여, 강력한 계면 활성능력을 가진 약알칼리 탈지제 Metex TS-40A 용액을 사용하여 담금(dipping) 시간에 따른 구리 seed 층 표면의 변화형상 및 변화상태를 조사 분석하였다. Field emission scanning electron microscope을 이용하여 TS-40A 용액에 전처리 후 구리 seed 표면 형상이 grain이 명확히 보일 정도로 변화하는 것을 관찰하였고, X-ray photoelectron spectroscopy를 이용하여 표면 처리된 Cu seed 표면의 화학구조 및 불순물 상태를 조사하였다. TS-40 용액에서의 dipping 시간 변화에 따른 효과는 거의 없었다. TS-40A 용액에 전처리한 후, 구리 seed 층 표면위의 많은 탄소성분이 제거되었고, 약간의 산소가 제거되었으며, O=C 및 $Cu(OH)_2$에 해당되는 피크들이 감소되는 것이 관측되었다. 하지만 표면에서 불순물 Si이 silicate 상태로 검출되었다. TS-40A 용액에 포함되어 있는 silicate 성분이 구리 seed 층과 반응하여 이 silicate 불순물이 구리 seed 표면에 형성된 것으로 보여진다. 약알칼리 탈지제 Metex TS-40A 용액을 사용한 전처리 과정을 통해, 구리 seed 표면 위의 O=C 및 $Cu(OH)_2$ 등의 제거에는 탁월한 효과를 보였으나, 불순물 silicate가 형성되었으므로 이 알칼리 탈지제를 사용한다면, 이후에 산세정 및 다른 세정과정을 거쳐 표면에 존재하는 silicate를 제거할 필요성이 있다.

• 대한치과교정학회지
• /
• 제47권5호
• /
• pp.306-312
• /
• 2017

Objective: The purpose of this study was to examine the effect of commercially available fluoride-containing oral rinses on the corrosion behavior of titanium alloys, which are the main components of orthodontic miniscrews. Methods: Four commercially available oral rinses (solution A, pH 4.46/260 ppm fluoride; solution B, pH 4.41/178 ppm fluoride; solution C, pH 6.30/117 ppm fluoride; and solution D, pH 4.17/3.92 ppm fluoride) were tested on titanium alloy (Ti-6Al-4V) circular plates, and saline was used as the control. The open-circuit potential and potentiodynamic polarization of these materials were measured. Thereafter, all samples were evaluated under a field-emission scanning electron microscope. Results: Among the tested oral rinses, except solution D, the more the fluoride content was, the greater was the corrosion potential downtrend; the corrosion resistance of the titanium alloy sample was also lowered significantly (p < 0.05). Field-emission scanning electron microscopic analysis of the surface morphology of the titanium alloy samples revealed that all samples had some defects, crevices, or pitting after exposure to the oral rinses than before treatment. In particular, the samples in solution A showed the most changes. Conclusions: Commercially available oral rinses having a high fluoride concentration and a low pH may reduce the corrosion resistance of titanium alloys used in dental appliances such as orthodontic titanium miniscrews and brackets.

• 한국주조공학회지
• /
• 제41권6호
• /
• pp.543-549
• /
• 2021

알루미늄 주철은 내산화성, 내황화성 및 부식성이 우수하다. Ti, Ni 합금에 비해 비전략적 원소인 Fe를 사용하는 비용이 상대적으로 저렴하여 구조재 및 스테인리스강의 대체재로 기대되고 있다. 이는 스테인리스 스틸을 사용하는 경우에 비해 약 30%의 중량 감소 효과를 가져온다. 알루미늄 합금의 경우 최근 몇 년간 주철의 합금원소로 널리 사용되고 있는 원소이다. 실온에서 연성이 부족하고 600℃를 초과하면 강도가 급격히 감소하여 실용화가 지연되었다. 실온 연성이 약한 원인은 수소에 의한 환경 취화로 알려져 있으며, 이러한 특성의 약점을 개선하기 위해 다양한 합금원소의 첨가가 시도되고 있다. 회주철의 경도와 내마모성을 높이기 위해 주로 바나듐, 크롬, 망간 등의 합금원소를 사용하고 있지만, 이러한 원소를 포함하는 완제품의 가격과 합금화의 문제는 많은 한계가 있다.

• 한국환경과학회지
• /
• 제26권1호
• /
• pp.67-78
• /
• 2017

Combustion of ethanol (EtOH) at low temperatures has been studied using titania- and silica-supported platinum nanocrystallites with different sizes in a wide range of 1~25 nm, to see if EtOH can be used as a clean, alternative fuel, i.e., one that does not emit sulfur oxides, fine particulates and nitrogen oxides, and if the combustion flue gas can be used for directly heating the interior of greenhouses. The results of $H_2-N_2O$ titration on the supported Pt catalysts with no calcination indicate a metal dispersion of $0.97{\pm}0.1$, corresponding to ca. 1.2 nm, while the calcination of 0.65% $Pt/SiO_2$ at 600 and $900^{\circ}C$ gives the respective sizes of 13.7 and 24.6 nm when using X-ray diffraction technique, as expected. A comparison of EtOH combustion using $Pt/TiO_2$ and $Pt/SiO_2$ catalysts with the same metal content, dispersion and nanoparticle size discloses that the former is better at all temperatures up to $200^{\circ}C$, suggesting that some acid sites can play a role for the combustion. There is a noticeable difference in the combustion characteristics of EtOH at $80{\sim}200^{\circ}C$ between samples of 0.65% $Pt/SiO_2$ consisting of different metal particle sizes; the catalyst with larger platinum nanoparticles shows higher intrinsic activity. Besides the formation of $CO_2$, low-temperature combustion of EtOH can lead to many other pathways that generate undesired byproducts, such as formaldehyde, acetaldehyde, acetic acid, diethyl ether, and ethylene, depending strongly on the catalyst and reaction conditions. A 0.65% $Pt/SiO_2$ catalyst with a Pt crystallite size of 24.6 nm shows stable performances in EtOH combustion at $120^{\circ}C$ even for 12 h, regardless of the space velocity allowed.

• 한국가금학회지
• /
• 제51권1호
• /
• pp.21-26
• /
• 2024

This study was conducted to investigate the composition of the fatty acids in the breast meat of Red-brown Korean native chickens (KNC-R). This study used a total sample of three hundred eighty-two KNC-R (males: 190, females: 192). We used the fatty acid methyl ester (FAME) method to extract the fatty acids. A 2-way ANOVA of the R program was used to assess the effects of batch and sex on each fatty acid trait. Analysis of the fatty acid in the sampled population showed that the predominant fatty acid was oleic acid (C18:1; 28.252%) which is monounsaturated fatty acid (MUFA), followed by palmitic acid (C16:0; 20.895%), saturated fatty acid (SFA), and two omega-6 polyunsaturated fatty acid (PUFAs): linoleic (C18:2; 15.975%), and arachidonic (C20:4; 10.541%). Indices used to evaluate the nutritional quality of fat in the diet: ratio between PUFAs and SFAs (P/S), thrombogenicity index (TI), and atherogenicity index (AI) were calculated and were 0.959, 0.814, and 0.355, respectively. Currently, meat consumers need healthier fatty acids. Therefore, information on the content of fatty acid in chicken meat is very important for meat consumers in choosing the type of the meat to be consumed.