• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.788-793
• /
• 2002

The glass-electroceramics were composed of glass composition(CaO, $SiO_2$, $B_2$ $O_3$) and electroceramic composition(BaO, N $d_2$ $O_3$, B $i_2$ $O_3$ and Ti $O_2$) Their dielectric properties have been investigated as a function of sintering temperature and glass contents. In the ceramics composed of 0.16BaO-0.15(N $d_{0.87}$,B $i_{0.13}$)$_2$ $O_3$-0.69Ti $O_2$with glass ［EG-2782］ 3wt% addition and sintered at 108$0^{\circ}C$ for 2h, we could obtain microwave properties of dielectric constant $\varepsilon$$_{r}$ = 80.1, quality factor Q $\times$f = 810(at 3.5 GHz) and temperature coefficient of resonant frequency $\tau$$_{f}$ = -1.3 ［ppm/$^{\circ}C$］. These experimental results show that dielectric constant and temperature coefficient of resonant frequency could be estimated by empirical equations involving the rule of mixture.e.

• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1881-1888
• /
• 2004

A series of $NiO-TiO_2$/$WO_3$ catalysts was prepared by drying powdered $Ni(OH)_2-Ti(OH)_4$ with ammonium metatungstate aqueous solution, followed by calcining in air at high temperature. Characterization of prepared catalysts was performed by using FTIR, Raman, XPS, XRD, and DSC and by measuring surface area. Upon the addition of tungsten oxide to titania up to 25 wt%, the specific surface area and acidity of catalysts increased in proportion to the tungsten oxide content due to the interaction between tungsten oxide and titania. Since the -$TiO_2$/stabilizes the tungsten oxide species, for the samples equal to or less than 25 wt%, tungsten oxide was well dispersed on the surface of titania, but for the samples containing above 25 wt%, the triclinic phase of $WO_3$ was observed at calcination temperature above 400 $^{\circ}C$. The catalytic activities of 10-NiO-$TiO_2$/$WO_3$ for 2-propanol dehydration and cumene dealkylation were correlated with the acidity of catalysts measured by ammonia chemisorption method. NiO may attract reactants and enhance the local concentration of reactants near the acid sites, consequently showing the increased catalytic activities.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.177-186
• /
• 2000

The molten carbonate fuel cell has conspicuous features and high potential in being used as an energy converter of various fuels to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti has been done in (62+38)mol % (Li+K) $CO_3$ melt at 923K by using. steady state polarization and electrochemical impedance spectroscopy method. It found that the corrosion current of these Febased alloys decreased with increasing Ti content, and this attribute to the formation of $LiCrO_2$ layer at the surface.

• 한국전기전자재료학회논문지
• /
• 제11권7호
• /
• pp.535-540
• /
• 1998

Thin films of PLZT were prepared on indium tin oxide(ITO) coated glass substrates by sol-gel process and annealed by rapid thermal annealing(RTA) at $750^{\circ}C$ for 5 minutes. The crystal structure of PLZT thin films were investigated for a different Zr mol% content. XRD results showed that the crystallographic structure was transitted from tetragonal to rhombohedral structure as Zr mol% increased. Raman spectroscopy results showed that the bands of spectra became broader as the amount of Zr mol% increased and two crystal phase coexisted at 2/55/45 PLZT film. Raman spectroscopy was useful for crystal structure analysis of PLZT thin films.

• 한국주조공학회지
• /
• 제24권4호
• /
• pp.231-237
• /
• 2004

Bake hardenable steel utilizes the phenomenon of strain aging to provide an increase in the yield strength of formed components. An increase of the carbon content will improve the bake hardening response: more solutes are available to pin mobile dislocations and to form the clusters more rapidly. But aging resistance decrease as increasing solute carbon. In order to under-stand the compatibility between bake hardenability and aging resistance. The optimum solute carbon control methods during manufacture should be determined. In this paper, the effect of continuous heat cycle conditions such as soaking temperature, rapid cooling start temperature, cooling rate on BH(Bake Hardenability), AI(Aging Index), YP-El(Yield Point Elongation) and other mechanical properties have been investigated. and following results were obtained. In the case of soaking temperature, BH increases with higher soaking temperature because of NbC $dissolution(830^{\circ}C)$, Therefore the solute carbon and BH at $850^{\circ}C$ and $870^{\circ}C$ are higher than these at $810^{\circ}C$. But BH at $870^{\circ}C$ is a little lower than that at $850^{\circ}C$ owing to the ferrite grain size. The measurement of amount of dissolution C using IFT(Internal Friction Test) can explain the relation of solute carbon and BH.

• 한국결정성장학회지
• /
• 제21권4호
• /
• pp.181-186
• /
• 2011

$WO_3$ 첨가가 $TiO_2$계 SCR 촉매의 고온안정성에 미치는 영향을 구조적, 형상학적 분석을 통해 규명하였다. 순수한 $TiO_2$시편과 10 wt%의 $WO_3$를 첨가한 $WO_3-TiO_2$ 시편을 제조하여 $800^{\circ}C$에서 5시간 동안 열적 스트레스를 인가하였다. FT-IR을 이용하여 촉매의 산점 변화를 확언한 결과 $WO_3-TiO_2$ 시편의 경우가 순수한 $TiO_2$ 시편에 비해 열적 열화로 인한 산점의 감소가 상대적으로 적었다. 반면 $WO_3-TiO_2$ 와 $TiO_2$의 anatase에 서 rutile로의 상전이 정도는 각각 28.4%와 22.9%로 오히려 $WO_3-TiO_2$ 시편에서 rutile 상이 더 많이 증가한 것을 확인하였다. 형상학적 분석 결과 $WO_3-TiO_2$ 시편은 고온에서 $TiO_2$에 고용되어 있던 amorphous 상태의 $WO_3$가 $TiO_2$ 입자 표면에 석출되며 결정화가 일어나게 되고 이로 인해 촉매의 입자성장을 억제함을 확인하였다. 따라서 SCR용 $TiO_2$ 촉매에 첨가된 $WO_3$는 anatase에서 rutile로의 상전이를 촉진시켜 고온에서의 촉매 활성을 저하시킬 수 있지만, 입성장 억제에 대한 영향이 커 결과적으로 고온안정성을 향상시킴을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.165-169
• /
• 2015

In this paper, in order to develop the composition ceramics with the excellent dielectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics were fabricated by the conventional solid-state method. The effects of ZnO addition on their microstructure and piezoelectric properties were systematically investigated. The rhombohedral-tetragonal phase coexistence has been found in the ceramics without ZnO content and then with further increasing ZnO content, specimens exhibited tetragonal phase. The optimized ZnO content formed liquid phase and aided the grain growth of specimens. When 0.4 wt% ZnO was added, the optimal physical properties ($d_{33}=422pC/N$, $d_{31}=161pC/N$, ${\varepsilon}_r=1,905$, $k_p=0.55$, $Q_m=160$) were obtained.

• 한국세라믹학회지
• /
• 제44권4호
• /
• pp.230-234
• /
• 2007

Cordierite ceramics were fabricated via a reaction sintering process using ceramics-filled polysiloxane as a precursor for cordierite ceramics. In this study, the effects of the additive composition, additive content, and sintering temperature on the sintered density and compressive strength of cordierite ceramics have been investigated The sintered densities of reaction-sintered cordierite ceramics containing $TiO_2$ as an additive were insensitive to the additive composition, additive content, and sintering temperature and ranged from $1.92g/cm^3\;to\;2.06g/cm^3$. In contrast, the cordierite ceramics containing $Y_2O_3$ showed a maximal density of $2.21g/cm^3$ at 5 wt% addition and at a sintering temperature of $1400^{\circ}C$. The compressive strength of cordierite ceramics showed the same tendency with the density. Typical compressive strength of cordierite ceramics containing 5 wt% $Y_2O_3$ as a sintering additive and sintered at $1400^{\circ}C\;was\;{\sim}480MPa$.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2003

Highly homogeneous PZT powder was prepared by a partial oxalate method using chemicals of (Z $r_{0.53}$ $Ti_{0.47}$) $O_2$, Pb(N $o_3$)$_2$and (COOH)$_2$ㆍ2$H_2O$. N $b_2$ $O_{5}$ addition effect on microstructure and electrical properties of PZT ceramics was investigated. When the precursors were calcined at 71$0^{\circ}C$, a single perovskite phase was obtained. After sintering at 110$0^{\circ}C$, X-ray diffraction Patterns showed coexistence of rhombohedral and tetragonal phases regardless of the N $b_2$ $O_{5}$ content. As the content of N $b_2$ $O_{5}$ increased, grain size decreased but sintered density increased. The electromechanical coupling factor of kp and the piezoelectric constant of $d_{31}$ increased linearly with the content of N $b_2$ $O_{5}$, and those values reached 0.7 and -200, respectively, when 1.2 mol% of N $b_2$ $O_{5}$ is added. is added.ded.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.534-542
• /
• 1994

Microstructures and dielectric properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.006Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramic were investigated. The specimens fired in a reducing atmosphere(N$_{2}$) were painted on the surface with CuO paste, and then annealed at 1100.deg. C for 2 hr. SEM and EDAX revealed that CuO penetrated rapidly into the bulk along the grain boundaries during the annealing. Grain size increased with increasing Ca content up to 15[mol%], but decreased with further addition. In the specimens with 10-15[mol%l of Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss(tan .delta[%]) <0.3[%] and capacitance change rate with temperature <.+-.[%], respectively. All the specimens in this study exhibited dielectric relaxation with frequency as a function of the temperature. The dispersive frequency was over 10$^{6}$ [Hz].z].