• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.186-189
• /
• 2003

The role of excess Pb about the crystallization behavior and electrical properties in b(Zr$\sub$0.52/Ti$\sub$0.48/)O3(PZT) thin films has not been precisely defined. In this work, the effect of excess Pb content on the ferroelectric properties of these films was investigated. To analyze the effect, PZT films containing various amounts of excess Pb were Prepared. PZT thin films were deposited on the Pt/Ti bottom electrode by rf magnetron sputtering method and then they were crystallized by rapid thermal annealing (RTA). The experiment showed that all PZT films indicated perovskite polycrystalline structure with preferred orientation (111) and no pyrochlore phase was observed. As higher excess Pb was included, the films showed that value of leakage current shift from 2.03${\times}$10$\^$-6/ to 6.63 ${\times}$ 10$\^$-8/A/cm$^2$ at 100kV/cm, and value of remanent polarization shift from 8.587 ${\mu}$C /cm$^2$ to 4.256 ${\mu}$C/ cm$^2$. Electrical properties of PZT thin film affected by Pb excess content of target were explained to be caused of defect among space charges and defect grain boundaries.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.296-300
• /
• 2009

Ethylene-1-butene copolymers were prepared with $SiO_2$-supported $TiCl_4$ catalyst by changing of 1-butene/ethylene molar ratio in feed, and the resulting copolymers were analyzed using temperature rising elution fractionation (TREF) and crystallization fractionation (Crystaf) methods to investigated the influence of $C_4/C_2$ molar ratio in feed on chemical compositional distribution and other parameters such as molecular weight and its distribution. TREF analysis showed that the copolymers had a broad and bimodal chemical compositional distribution (CCD) regardless of the content of 1-butene in the copolymer. The chemical composition was in the range of 5 to 55 branches per 1,000 carbons for all copolymers prepared in the study. Furthermore, the broader CCD was revealed for the copolymers having the higher content of 1-butene. Crystaf analysis did not showed a bimodal CCD for the copolymers having the 1-butene content of less than 5.1 wt%. The lower crytalline part having 1-butene content in Crystaf analysis was less than of TREF analysis.

• 한국재료학회지
• /
• 제5권5호
• /
• pp.552-559
• /
• 1995

Titanium nitride films were deposited on the (100) oriented-p-type silicon substrates of RF plasma enhanced chemical vapor depositiom\n using a gaseous mixutre of TiCl$_{4}$, N$_{2}$, H$_{2}$ and Ar. The chemincal composition, structure and the rsistivituy of the films were investigated with the deposition variables such as the flow rate ratio of N$_{2}$/TiCl$_{4}$, the deposition temperature and the RF power. The deposition rate increases with increasing the flow rate ratio of N$_{2}$TiCl$_{4}$ and RF power, while the rate decreases with increasing the deposition temperature. As the flow rate ratio of N$_{2}$/TiCl$_{4}$ and depostion temperature increases within proper RF pwoer, the Cl concentartion in the films decreases and the stoichiometry and crystallingiy are improved, so decreases the resistivity of the films. The films depostied under the condition of the N$_{2}$/TiCl$_{4}$ ratio of 30, the RF power of 50W and the depostion temperature of 62$0^{\circ}C$ had the Cl content of 1.5at% and the resistivity of 56㏁cm. Also, the bottom coverage of the films was above 60% on the step with the width and depth of 0.6${\mu}{\textrm}{m}$$\times$0.6${\mu}{\textrm}{m}$.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.142-147
• /
• 2010

Nano-sized $BaNd_2Ti_5O_{14}$ powders were prepared by the spray pyrolysis process. Sucrose used as the organic additive enabled the formation of nano-sized $BaNd_2Ti_5O_{14}$ powders. The powders prepared from the spray solution without sucrose had a spherical shape, dense structure and micron size before and after calcination. However, the precursor powders prepared from the spray solution with sucrose had a large size, and hollow and porous morphology. The precursor powders had an amorphous crystal structure because of the short residence time of the powders inside the hot wall reactor. The complete decomposition of sucrose did not occur inside the hot wall reactor. Therefore, the precursor powders obtained from the spray solution with sucrose of 0.5M had a carbon content of 39.2wt.%. The powders obtained from the spray solution with sucrose of 0.5M had a slightly aggregated structure of nano-sized primary powders of $BaNd_2Ti_5O_{14}$ crystalline phase after calcination at $1000^{\circ}C$. The calcined powders turned into nano-sized $BaNd_2Ti_5O_{14}$ powders after milling. The mean size of the $BaNd_2Ti_5O_{14}$ powders was 125 nm.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.145-149
• /
• 2000

The purpose of this study was to determine whether Vermi Cast could be used effectively to remove $SO_2$ from flue gas, and then to investigate optimum adsorption conditions. The Vermi Cast used as adsorbent was mechanically screened with 8~20 mesh sieve. The adsorption data for $SO_2$ were regressed using the Freundlich isotherm. The fit was generally satisfactory ($R^2$=0.945~0.982). With the temperature changes from 2$0^{\circ}C$ to 4$0^{\circ}C$, the constant k in Freundlich isotherm qe= $kCe^{1/n}$, decreased from 1.409 at 2$0^{\circ}C$to 0.297 at 4$0^{\circ}C$, and the exponent 1/n were decreased from 0.343 to 0.134. With the bed depth changes from 10cm to 30cm, the adsorption capacity expressed as mmol of $SO_2$ adsorbed per g of Vermi Cast increased from 0.247 to 0.381. Moisture content is an important parameter in the $SO_2$ adsorbed were observed over 0.3mmol $SO_2$ /g Vermi Cast. The best adsorption capacity was 0.487mmol $SO_2$ /g Vermi Cast, and it was obtained with moisture content 37%, temperature 2$0^{\circ}C$. From the above results, ti might be concluded that Vermi Cast is effectively as a good adsorbent to remove $SO_2$ from flue gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.33-36
• /
• 1998

BST(66/34) and BSCT(60/30/10) ceramics were prepared by mixed oxide method and studied about the microstructural and dielectric properties with $Y_2$O$_3$, Dy$_2$O$_3$, La$_2$O$_3$, MnCO$_3$. The grain size of undoped BST was 20~30 ${\mu}{\textrm}{m}$, but that of BST, doped content of MnCO$_3$ was 0.1 mol%, was decreased with increasing the contents of $Y_2$O$_3$. As the content of $Y_2$O$_3$ was Increased, Tc was shifted to lower temperature and dielectric constant at Tc was decreased. The dielectric constant of doped BSCT(60/30/10) ceramics ( 0.9 mol% $Y_2$O$_3$. and 0.1 mol% MnCO$_3$) was about 8, 000 at Tc( 22$^{\circ}C$ ).

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.755-759
• /
• 2008

For the development of a new white dielectric layer in plasma display panel, different $TiO_2$ types as a filler was add to the $Bi_2O_3$-BaO-ZnO glass matrix. The reflectance and dielectric constant of dielectric have been investigated as a function of the mixing content (rutile and anatase), and sintering temperature. The reflectance of dielectric sintered at the 520$^{\circ}C$ appeared most highly and suitable in terms of the adhesion and reflectance of the soda-lime glasses. Also, the thermal expansion coefficient of dielectric was found to be $85.6\times10^{-7}/K$, which was similar to that of the soda-lime glasses. Especially, the dielectric constants were not increased with increasing of $TiO_2$ filler contents.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.413-418
• /
• 2009

Effects of chlorophyll and visible light exposure on the volatile formations and headspace oxygen content were studied in lard model systems at $55^{\circ}C$. Samples with or without addition of chlorophyll under light underwent photosensization or photooxidation, respectively. Total volatiles (TI) in lard with 5 ppm chlorophyll photosensization were 19 times higher than those in visible light photooxidized samples for 48 hr while TI in lard with chlorophyll in the dark were not significantly different from those in photooxidized samples (p>0.05). Headspace oxygen content in photosensitized lard decreased from 21 to 15% for 48 hr but that in photooxidized lard or that in lard with chlorophyll in the dark did not change significantly (p>0.05), which indicates that lard system used in this study is a photosensitizer-free model system and the presence of chlorophyll accelerated the lipid oxidation only under visible light. Oxidation mechanisms of photooxidation with or without presence of photosensitizers under visible light were not the same based on the difference of oxidized volatile profiles and headspace oxygen depletion.

• 대한화학회지
• /
• 제39권10호
• /
• pp.806-811
• /
• 1995

정온도저항계수(PTCR) 특성을 지닌 $(Ba,Sr)_{1-x}Y_xTiO_3$(x = 0.001-0.009, BSYT)를 옥살산공침범으로 합성하여 이트륨 혼입량 변화에 따른 전기적 특성을 관찰하였다. 온도변화에 따른 저항을 측정한 결과 이트륨의 농도가 0.3mol%로 증가할때까지는 큰 PTCR 효과를 나타낸 반면 농도가 0.5mol% 이상에서는 적은 PTCR 효과를 나타내었다. 상전이 온도($T_c$) 이상에서 온도와 $1{\varepsilon}$m(T)의 관계를 나타낸 도시에 의하면 유전상수의 변화가 Curie-Wiess 법칙에 잘 따름을 알 수 있었다. 측정한 비저항과 유전상수로부터 계산한 전위장벽위 높이를 온도에 따라 도시한 결과 PTCR 효과와 마찬가지로 이트륨의 혼입량이 0.3mol%로 증가할때까지는 높은 전위장벽이 유지되나 0.5mol% 이상에서는 비교적 낮은 전위장벽을 나타내었다.

• 대한화학회지
• /
• 제27권4호
• /
• pp.273-278
• /
• 1983

합성표준시료를 이용하여 주석슬랙 중 유가금속들인 $Ta_2O_5, Nb_2O_5, TiO_2, SnO_2 $및 $ZrO_2$를 X-선형광분광법으로 정량하였다. 분석시료와 표준시료분말들을 융제인 무수 $Li_2B_4O_7$과 $La_2O_3$를 무게비 15:42:3의 비율로 균일하게 혼합한다. 혼합분말을 $1,150^{\circ}C$에서 30분간 용융하여 유리구슬을 만든다. 이 구슬을 325메쉬 이하로 분쇄하여 수압기를 이용 pellet으로 만들어 시편으로 사용한다. 분석결과들은 다른 분석법에 의해 얻은 값들과 허용오차 범위내에서 잘 일치한다. 또 PTS-H시료에 대한 표준편차가 함량 3.40 %에서 0.12 %로 재현성도 좋음을 보여 주었다.